{"product_id":"hobbywing-sbus2-telemetry-adapter-for-futaba","title":"Hobbywing S.BUS2 5-9V Telemetry Adapter for Futaba Data Transmission Module","description":"\u003cstyle\u003e\n  .cnhl-note-box {\n    background: #fafafa;\n    border-left: 4px solid #E60073;\n    padding: 12px 14px;\n    margin: 16px 0;\n    font-size: 14px;\n    line-height: 1.55;\n  }\n  .cnhl-feature-section {\n    margin: 26px 0;\n  }\n  .cnhl-feature-img {\n    width: 100%;\n    max-width: 100%;\n    height: auto;\n    display: block;\n    margin: 16px auto;\n    border-radius: 12px;\n  }\n\u003c\/style\u003e\n\u003cp\u003e\u003cstrong\u003eHobbywing S.BUS2 Telemetry Adapter for Futaba\u003c\/strong\u003e is a compact data transmission module designed to send ESC telemetry information from supported Hobbywing ESCs to compatible Futaba S.BUS2 radio systems. When used with a supported ESC and Futaba equipment, it allows pilots to view operating data such as voltage, current, RPM, temperature, and ESC status information in real time.\u003c\/p\u003e\n\u003cp class=\"collapsible\"\u003eThis adapter is especially useful for pilots using Hobbywing Platinum V4, V4.1, or V5 aircraft ESCs with data backhaul support, as well as selected Hobbywing car ESCs that support telemetry data output. Its small 25 × 13 × 6mm body and 3.5g weight make it easy to install in RC helicopters, airplanes, and advanced power-system setups where real-time ESC data is important.\u003c\/p\u003e\n\u003cp class=\"collapsible\"\u003eUse this adapter only with compatible Hobbywing ESCs and Futaba equipment that supports the S.BUS2 protocol. Always check the ESC manual, Futaba transmitter firmware, receiver compatibility, wiring direction, voltage supply, and telemetry support before installation.\u003c\/p\u003e\n\u003ch2 style=\"font-size: 18px; font-weight: bold; margin: 24px 0 10px; color: #000; border-bottom: 1px solid #eee; padding-bottom: 6px;\"\u003eQuick Fit Check\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e Sends Hobbywing ESC telemetry data to compatible Futaba S.BUS2 systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest for:\u003c\/strong\u003e Supported Hobbywing Platinum V4 \/ V4.1 \/ V5 ESCs and selected Hobbywing ESCs with data backhaul function.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtocol:\u003c\/strong\u003e Futaba S.BUS2 telemetry data transmission.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking voltage:\u003c\/strong\u003e 5–9V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 25 × 13 × 6mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Approx. 3.5g.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED status:\u003c\/strong\u003e Red and green LEDs show adapter communication status.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImportant:\u003c\/strong\u003e The “-P” port does not provide power input. Follow the manual wiring diagram carefully.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size: 18px; font-weight: bold; margin: 24px 0 10px; color: #000; border-bottom: 1px solid #eee; padding-bottom: 6px;\"\u003eProduct Specifications\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; display: block; overflow-x: auto; border-collapse: separate !important; border-spacing: 0 8px !important; font-size: 14px; line-height: 1.3;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 40%; background: #E60073; color: #fff; font-weight: bold; padding: 12px; border-radius: 6px 0 0 6px;\"\u003eBrand\u003c\/td\u003e\n\u003ctd style=\"background: #f7f7f7; padding: 12px; border-radius: 0 6px 6px 0;\"\u003eHobbywing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 40%; background: #E60073; color: #fff; font-weight: bold; padding: 12px; border-radius: 6px 0 0 6px;\"\u003eProduct Name\u003c\/td\u003e\n\u003ctd style=\"background: #f7f7f7; padding: 12px; border-radius: 0 6px 6px 0;\"\u003eS.BUS2 Telemetry Adapter for Futaba\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 40%; background: #E60073; color: #fff; font-weight: bold; padding: 12px; border-radius: 6px 0 0 6px;\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"background: #f7f7f7; padding: 12px; border-radius: 0 6px 6px 0;\"\u003eS.BUS2 5–9V Telemetry Adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 40%; background: #E60073; color: #fff; font-weight: bold; padding: 12px; border-radius: 6px 0 0 6px;\"\u003eWorking Voltage\u003c\/td\u003e\n\u003ctd style=\"background: #f7f7f7; padding: 12px; border-radius: 0 6px 6px 0;\"\u003e5–9V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 40%; background: #E60073; color: #fff; font-weight: bold; padding: 12px; border-radius: 6px 0 0 6px;\"\u003eProtocol\u003c\/td\u003e\n\u003ctd style=\"background: #f7f7f7; padding: 12px; border-radius: 0 6px 6px 0;\"\u003eFutaba S.BUS2 telemetry data transmission\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 40%; background: #E60073; color: #fff; font-weight: bold; padding: 12px; border-radius: 6px 0 0 6px;\"\u003eMain Function\u003c\/td\u003e\n\u003ctd style=\"background: #f7f7f7; padding: 12px; border-radius: 0 6px 6px 0;\"\u003eTransmits supported Hobbywing ESC telemetry data to compatible Futaba S.BUS2 equipment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 40%; background: #E60073; color: #fff; font-weight: bold; padding: 12px; border-radius: 6px 0 0 6px;\"\u003eSupported ESC Direction\u003c\/td\u003e\n\u003ctd style=\"background: #f7f7f7; padding: 12px; border-radius: 0 6px 6px 0;\"\u003eSupported Hobbywing Platinum V4 \/ V4.1 \/ V5 ESCs with data backhaul function and selected Hobbywing ESCs that support real-time data output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 40%; background: #E60073; color: #fff; font-weight: bold; padding: 12px; border-radius: 6px 0 0 6px;\"\u003eLED Indicators\u003c\/td\u003e\n\u003ctd style=\"background: #f7f7f7; padding: 12px; border-radius: 0 6px 6px 0;\"\u003eRed and green LEDs show ESC-adapter and adapter-receiver communication status\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 40%; background: #E60073; color: #fff; font-weight: bold; padding: 12px; border-radius: 6px 0 0 6px;\"\u003eSize (L × W × H)\u003c\/td\u003e\n\u003ctd style=\"background: #f7f7f7; padding: 12px; border-radius: 0 6px 6px 0;\"\u003e25 × 13 × 6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 40%; background: #E60073; color: #fff; font-weight: bold; padding: 12px; border-radius: 6px 0 0 6px;\"\u003eApprox Weight\u003c\/td\u003e\n\u003ctd style=\"background: #f7f7f7; padding: 12px; border-radius: 0 6px 6px 0;\"\u003e3.5g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 40%; background: #E60073; color: #fff; font-weight: bold; padding: 12px; border-radius: 6px 0 0 6px;\"\u003ePackage Included\u003c\/td\u003e\n\u003ctd style=\"background: #f7f7f7; padding: 12px; border-radius: 0 6px 6px 0;\"\u003e1 × Hobbywing S.BUS2 Telemetry Adapter for Futaba\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 40%; background: #E60073; color: #fff; font-weight: bold; padding: 12px; border-radius: 6px 0 0 6px;\"\u003eStock Number\u003c\/td\u003e\n\u003ctd style=\"background: #f7f7f7; padding: 12px; border-radius: 0 6px 6px 0;\"\u003e30850500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2 style=\"font-size: 18px; font-weight: bold; margin: 24px 0 10px; color: #000; border-bottom: 1px solid #eee; padding-bottom: 6px;\"\u003eReal-Time ESC Telemetry for Futaba S.BUS2\u003c\/h2\u003e\n\u003cp\u003e\nThe S.BUS2 Telemetry Adapter works as a data bridge between a supported Hobbywing ESC and compatible Futaba S.BUS2 radio equipment. Instead of changing the ESC’s throttle signal path, it adds a telemetry data path so the ESC can send real-time operating information to the Futaba system.\n\u003c\/p\u003e\n\u003cp\u003e\nDepending on the ESC and radio system, telemetry data may include information such as voltage, current, RPM, temperature, and ESC status. Some ESC models may not provide every data type, so always check the supported ESC list and the relevant product manual before installation.\n\u003c\/p\u003e\n\u003cdiv class=\"cnhl-note-box\"\u003e\n\u003cstrong\u003eCompatibility note:\u003c\/strong\u003e This adapter does not make every Hobbywing ESC compatible with Futaba telemetry. It is for supported ESCs with data backhaul function and Futaba equipment that supports S.BUS2 telemetry.\n\u003c\/div\u003e\n\u003ch2 style=\"font-size: 18px; font-weight: bold; margin: 24px 0 10px; color: #000; border-bottom: 1px solid #eee; padding-bottom: 6px;\"\u003eHow the S.BUS2 Adapter Connects to Your ESC and Futaba Receiver\u003c\/h2\u003e\n\u003cp\u003e\nThe adapter is installed between the ESC telemetry\/programming port and the Futaba receiver’s S.BUS2 channel. The supported ESC port, usually identified as “- + P”, connects to the adapter “-P” side. The adapter “-S.BUS2” side then connects to the Futaba receiver’s S.BUS2 channel.\n\u003c\/p\u003e\n\u003cp\u003e\nThe ESC throttle signal wire still connects to the normal throttle channel on the Futaba receiver. This means the S.BUS2 adapter is not replacing the throttle signal connection; it is only adding telemetry data transmission so the ESC can send real-time operating data to compatible Futaba equipment.\n\u003c\/p\u003e\n\u003cdiv class=\"cnhl-note-box\"\u003e\n\u003cstrong\u003eImportant wiring note:\u003c\/strong\u003e The adapter input voltage is 5–9V, and the “-P” port does not provide power input. Follow the manual wiring direction carefully before powering the system.\n\u003c\/div\u003e\n\u003cdiv class=\"cnhl-feature-section\"\u003e\n  \u003cp\u003e\u003cimg class=\"cnhl-feature-img\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0633\/0617\/0582\/files\/A_45fffeff-7601-4a62-9e7b-584027db66c3.png\" alt=\"Hobbywing S.BUS2 Telemetry Adapter wiring diagram for ESC and Futaba receiver\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2 style=\"font-size: 18px; font-weight: bold; margin: 24px 0 10px; color: #000; border-bottom: 1px solid #eee; padding-bottom: 6px;\"\u003eParameter Setup with LCD Program Box\u003c\/h2\u003e\n\u003cp\u003e\nFor adapter parameter setup, connect the S.BUS2 adapter to a compatible Hobbywing LCD Program Box as shown in the manual. The adapter “-P” side connects to the LCD Program Box “ESC” side, while the “-S.BUS2” cable is connected through a Y-wire. A battery supplies power at the program box side, and the manual recommends using a 2S battery for this setup.\n\u003c\/p\u003e\n\u003cp\u003e\nAfter connection, press “OK” on the LCD Program Box. Once the connection is successful, the current firmware version will be displayed. Use “ITEM” to browse parameter items, “VALUE” to change the selected value, and “OK” to save the setting. After setup is complete, disconnect the adapter from the battery and power it up again to confirm the parameters are current.\n\u003c\/p\u003e\n\u003cdiv class=\"cnhl-note-box\"\u003e\n\u003cstrong\u003eSetup note:\u003c\/strong\u003e This parameter setup is for the S.BUS2 Telemetry Adapter, not for changing every ESC parameter. ESC setup still depends on the supported ESC model, LCD Program Box compatibility, and the ESC manual.\n\u003c\/div\u003e\n\u003cdiv class=\"cnhl-feature-section\"\u003e\n  \u003cp\u003e\u003cimg class=\"cnhl-feature-img\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0633\/0617\/0582\/files\/B_000bc8cf-23e7-4207-ab42-f93896e6e768.png\" alt=\"Hobbywing S.BUS2 Telemetry Adapter parameter setting with LCD Program Box and battery\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2 style=\"font-size: 18px; font-weight: bold; margin: 24px 0 10px; color: #000; border-bottom: 1px solid #eee; padding-bottom: 6px;\"\u003eSupported Hobbywing ESC Direction\u003c\/h2\u003e\n\u003cp\u003e\nThis adapter is designed for supported Hobbywing ESCs with real-time data output. Always confirm compatibility from the ESC manual or Hobbywing official product information before use.\n\u003c\/p\u003e\n\u003ch3 style=\"font-size: 15px; font-weight: bold; margin: 14px 0 8px; color: #000;\"\u003eSupported Futaba Air ESC Direction\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePlatinum 25A V4 — no current data\u003c\/li\u003e\n\u003cli\u003ePlatinum 60A V4 — no current data\u003c\/li\u003e\n\u003cli\u003ePlatinum 80A V4\u003c\/li\u003e\n\u003cli\u003ePlatinum 120A V4\u003c\/li\u003e\n\u003cli\u003ePlatinum HV 130A V4\u003c\/li\u003e\n\u003cli\u003ePlatinum HV 130A V4 OPTO\u003c\/li\u003e\n\u003cli\u003ePlatinum HV 200A V4.1 SBEC\u003c\/li\u003e\n\u003cli\u003ePlatinum HV 200A V4.1 OPTO\u003c\/li\u003e\n\u003cli\u003ePlatinum 150A V5\u003c\/li\u003e\n\u003cli\u003ePlatinum HV 260A V5\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"font-size: 15px; font-weight: bold; margin: 14px 0 8px; color: #000;\"\u003eSelected Supported Car ESC Direction\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eXERUN XR10 PRO G2S — no current data\u003c\/li\u003e\n\u003cli\u003eXERUN XR8 PLUS G2S\u003c\/li\u003e\n\u003cli\u003eXERUN XR8 PRO G2\u003c\/li\u003e\n\u003cli\u003eXERUN XR8 PRO G3\u003c\/li\u003e\n\u003cli\u003eXERUN XD10 PRO — no current data\u003c\/li\u003e\n\u003cli\u003eEZRUN MAX10 G2\u003c\/li\u003e\n\u003cli\u003eEZRUN MAX8 G2\u003c\/li\u003e\n\u003cli\u003eEZRUN MAX4 HV\u003c\/li\u003e\n\u003cli\u003eEZRUN MAX5 HV G2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"cnhl-note-box\"\u003e\n\u003cstrong\u003eFutaba radio note:\u003c\/strong\u003e Please consult Futaba official information for compatible transmitter models and firmware versions. Known supported examples include T32MZ, T16IZ, T18SZ, and T10PX, but compatibility should be confirmed before use.\n\u003c\/div\u003e\n\u003ch2 style=\"font-size: 18px; font-weight: bold; margin: 24px 0 10px; color: #000; border-bottom: 1px solid #eee; padding-bottom: 6px;\"\u003eProgrammable Parameters for Adapter Telemetry Data\u003c\/h2\u003e\n\u003cp\u003e\nThe S.BUS2 adapter parameter setup is mainly used to help Futaba equipment display telemetry data correctly. Parameters include motor pole logarithm, pinion, main gear, and start slot. These values help the radio system calculate and display data such as RPM or telemetry positioning correctly.\n\u003c\/p\u003e\n\u003ctable style=\"width: 100%; display: block; overflow-x: auto; border-collapse: separate !important; border-spacing: 0 8px !important; font-size: 14px; line-height: 1.3;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 40%; background: #E60073; color: #fff; font-weight: bold; padding: 12px; border-radius: 6px 0 0 6px;\"\u003eMotor Pole Logarithm\u003c\/td\u003e\n\u003ctd style=\"background: #f7f7f7; padding: 12px; border-radius: 0 6px 6px 0;\"\u003e1–50, default 1. Used to set the motor pole information for telemetry calculation.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 40%; background: #E60073; color: #fff; font-weight: bold; padding: 12px; border-radius: 6px 0 0 6px;\"\u003ePinion\u003c\/td\u003e\n\u003ctd style=\"background: #f7f7f7; padding: 12px; border-radius: 0 6px 6px 0;\"\u003e1–100, default 1. Used to set the number of teeth on the motor output shaft.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 40%; background: #E60073; color: #fff; font-weight: bold; padding: 12px; border-radius: 6px 0 0 6px;\"\u003eMain Gear\u003c\/td\u003e\n\u003ctd style=\"background: #f7f7f7; padding: 12px; border-radius: 0 6px 6px 0;\"\u003e1–255, default 1. Used to set the number of teeth on the main gear for gear ratio calculation.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 40%; background: #E60073; color: #fff; font-weight: bold; padding: 12px; border-radius: 6px 0 0 6px;\"\u003eStart Slot\u003c\/td\u003e\n\u003ctd style=\"background: #f7f7f7; padding: 12px; border-radius: 0 6px 6px 0;\"\u003e8 \/ 16 \/ 24, default 24. Used to manually set the starting data position on the Futaba remote control sensor menu.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2 style=\"font-size: 18px; font-weight: bold; margin: 24px 0 10px; color: #000; border-bottom: 1px solid #eee; padding-bottom: 6px;\"\u003eLED Status Guide\u003c\/h2\u003e\n\u003cp\u003e\nThe two LEDs on the adapter help show whether the ESC, adapter, and receiver are communicating correctly.\n\u003c\/p\u003e\n\u003ctable style=\"width: 100%; display: block; overflow-x: auto; border-collapse: separate !important; border-spacing: 0 8px !important; font-size: 14px; line-height: 1.3;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 40%; background: #E60073; color: #fff; font-weight: bold; padding: 12px; border-radius: 6px 0 0 6px;\"\u003eRed LED Flashes\u003c\/td\u003e\n\u003ctd style=\"background: #f7f7f7; padding: 12px; border-radius: 0 6px 6px 0;\"\u003eESC is communicating with the adapter.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 40%; background: #E60073; color: #fff; font-weight: bold; padding: 12px; border-radius: 6px 0 0 6px;\"\u003eGreen LED Flashes\u003c\/td\u003e\n\u003ctd style=\"background: #f7f7f7; padding: 12px; border-radius: 0 6px 6px 0;\"\u003eAdapter is communicating with the receiver.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 40%; background: #E60073; color: #fff; font-weight: bold; padding: 12px; border-radius: 6px 0 0 6px;\"\u003eRed LED Not On\u003c\/td\u003e\n\u003ctd style=\"background: #f7f7f7; padding: 12px; border-radius: 0 6px 6px 0;\"\u003eESC is not connected properly or is not communicating with the adapter.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 40%; background: #E60073; color: #fff; font-weight: bold; padding: 12px; border-radius: 6px 0 0 6px;\"\u003eGreen LED Not On\u003c\/td\u003e\n\u003ctd style=\"background: #f7f7f7; padding: 12px; border-radius: 0 6px 6px 0;\"\u003eAdapter is not connected to the receiver properly or is not communicating with the receiver.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 40%; background: #E60073; color: #fff; font-weight: bold; padding: 12px; border-radius: 6px 0 0 6px;\"\u003eRed and Green LEDs Not Flashing\u003c\/td\u003e\n\u003ctd style=\"background: #f7f7f7; padding: 12px; border-radius: 0 6px 6px 0;\"\u003eNo communication between ESC and receiver, or the adapter contact point is not connected properly.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2 style=\"font-size: 18px; font-weight: bold; margin: 24px 0 10px; color: #000; border-bottom: 1px solid #eee; padding-bottom: 6px;\"\u003eOfficial Manual\u003c\/h2\u003e\n\u003cp\u003e\nDownload the official manual here: \u003ca style=\"color: #E60073; text-decoration: underline;\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0633\/0617\/0582\/files\/HOBBYWING_S.BUS2_Telemetry_Adapter_for_FUTABA_User_Manual.pdf?v=1783476080\"\u003eHobbywing S.BUS2 Telemetry Adapter for Futaba User Manual\u003c\/a\u003e.\n\u003c\/p\u003e\n\u003ch2 style=\"font-size: 18px; font-weight: bold; margin: 24px 0 10px; color: #000; border-bottom: 1px solid #eee; padding-bottom: 6px;\"\u003eRecommended Collection Paths\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca style=\"color: #E60073; text-decoration: underline;\" href=\"https:\/\/chinahobbyline.com\/collections\/esc-programmers-accessories\"\u003eESC Programmers \u0026amp; Accessories\u003c\/a\u003e — browse Hobbywing setup tools, programmers, telemetry adapters, and ESC accessories.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca style=\"color: #E60073; text-decoration: underline;\" href=\"https:\/\/chinahobbyline.com\/collections\/hobbywing-platinum-escs\"\u003eHobbywing Platinum ESCs\u003c\/a\u003e — compare supported Platinum aircraft ESC options.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca style=\"color: #E60073; text-decoration: underline;\" href=\"https:\/\/chinahobbyline.com\/collections\/hobbywing-escs\"\u003eHobbywing ESCs\u003c\/a\u003e — explore the full Hobbywing ESC lineup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size: 18px; font-weight: bold; margin: 24px 0 10px; color: #000; border-bottom: 1px solid #eee; padding-bottom: 6px;\"\u003eFAQ: Hobbywing S.BUS2 Telemetry Adapter for Futaba\u003c\/h2\u003e\n\u003ch3 style=\"font-size: 15px; font-weight: bold; margin: 14px 0 8px; color: #000;\"\u003eWhat does the Hobbywing S.BUS2 Telemetry Adapter do?\u003c\/h3\u003e\n\u003cp\u003e\nIt allows supported Hobbywing ESCs to transmit telemetry data to compatible Futaba S.BUS2 radio systems, helping pilots monitor ESC operating status in real time.\n\u003c\/p\u003e\n\u003ch3 style=\"font-size: 15px; font-weight: bold; margin: 14px 0 8px; color: #000;\"\u003eDoes this adapter control the throttle signal?\u003c\/h3\u003e\n\u003cp\u003e\nNo. The ESC throttle signal wire still connects to the normal throttle channel on the Futaba receiver. The adapter adds S.BUS2 telemetry data transmission and does not replace the throttle connection.\n\u003c\/p\u003e\n\u003ch3 style=\"font-size: 15px; font-weight: bold; margin: 14px 0 8px; color: #000;\"\u003eDoes the “-P” port provide power?\u003c\/h3\u003e\n\u003cp\u003e\nNo. The “-P” port does not provide power input. The adapter working voltage is 5–9V, and wiring should follow the official manual diagram.\n\u003c\/p\u003e\n\u003ch3 style=\"font-size: 15px; font-weight: bold; margin: 14px 0 8px; color: #000;\"\u003eDoes this adapter work with every Hobbywing ESC?\u003c\/h3\u003e\n\u003cp\u003e\nNo. It only works with supported Hobbywing ESCs that have data backhaul or real-time data output support. Check the ESC manual or official compatibility information before use.\n\u003c\/p\u003e\n\u003ch3 style=\"font-size: 15px; font-weight: bold; margin: 14px 0 8px; color: #000;\"\u003eDoes this adapter work with every Futaba transmitter?\u003c\/h3\u003e\n\u003cp\u003e\nNo. The Futaba transmitter and receiver system must support S.BUS2 telemetry, and firmware compatibility should be confirmed with Futaba official information.\n\u003c\/p\u003e\n\u003ch3 style=\"font-size: 15px; font-weight: bold; margin: 14px 0 8px; color: #000;\"\u003eCan I use it with Hobbywing Platinum V5 ESCs?\u003c\/h3\u003e\n\u003cp\u003e\nIt is intended for supported Platinum V4 \/ V4.1 \/ V5 ESCs with data backhaul function. Confirm the exact ESC model and telemetry support before installation.\n\u003c\/p\u003e\n\u003ch3 style=\"font-size: 15px; font-weight: bold; margin: 14px 0 8px; color: #000;\"\u003eDo I need an LCD Program Box to use this adapter?\u003c\/h3\u003e\n\u003cp\u003e\nAn LCD Program Box is used for adapter parameter setup, such as motor pole, pinion, main gear, and start slot. Normal telemetry use depends on correct ESC, adapter, and Futaba S.BUS2 receiver wiring.\n\u003c\/p\u003e","brand":"ChinaHobbyLine","offers":[{"title":"Global","offer_id":48553906634966,"sku":"Futaba Telemtery Adapter GL","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/0617\/0582\/files\/FutabaTelemetryAdapter_2048x_a62e4917-ba13-4cff-9354-0db0f3eb26ec.webp?v=1783476610","url":"https:\/\/chinahobbyline.com\/ru\/products\/hobbywing-sbus2-telemetry-adapter-for-futaba","provider":"ChinaHobbyLine","version":"1.0","type":"link"}