A damaged horizontal stabilizer can make a “good-looking” aircraft feel unpredictable—especially on flare, slow approaches, or when you’re trying to dial in smooth elevator control. This Horizontal Stabilizer replacement is for CNHL Bison XT STOL 1750mm owners who want the tail back to straight, solid, and confidence-inspiring.
Part type: Horizontal stabilizer (tailplane) foam replacement
Common Reasons to Replace the Horizontal Stabilizer
Cracks near the stabilizer root after a tail-first bump or rough landing
Twist/warp that shows up as inconsistent elevator trim or “mushy” pitch feel
Damage from transport pressure (the tail is an easy spot to get bumped)
Foam fatigue after repeated repairs where alignment no longer stays true
Why Tail Alignment Matters on This Airframe
On a larger STOL-style model like the Bison, a small misalignment at the tail can show up as bigger “behavior changes” in the air—especially when you’re flying slower, using flaps, or trying to land short. If you’re rebuilding after an incident, it’s smart to check the fin and fuselage straightness too so the new stabilizer isn’t compensating for an unseen twist elsewhere.
Install Notes (Practical)
Dry fit first: confirm the stabilizer sits flush and square before final fastening.
Control check: after reassembly, confirm both elevator halves track evenly through full travel.
Re-check CG: after any tail repair, re-balance with your usual 6S pack position before the next flight.
Produk CNHL dilengkapi dengan garansi 90 hari sejak tanggal pembelian, kecuali dinyatakan lain dalam daftar produk.
Garansi ini mencakup cacat asli pada bahan dan pengerjaan. Garansi ini tidak mencakup keausan dan kerusakan normal, pembengkakan, pembengkakan, pengosongan berlebih, pengisian berlebih, penyimpanan yang tidak tepat, kerusakan akibat benturan atau air, perubahan konektor, atau kerusakan apa pun yang diakibatkan oleh penyalahgunaan atau penanganan yang salah.
Jika Anda menemukan bahwa produk yang dibeli dari kami cacat dalam periode garansi 90 hari, silakan hubungi kami untuk mengatur pengembalian untuk inspeksi. Berdasarkan evaluasi kami, kami biasanya akan memperbaiki, mengganti, atau menawarkan solusi yang sesuai tanpa biaya tambahan.
Harap dicatat bahwa pelanggan bertanggung jawab atas biaya pengiriman saat mengembalikan produk untuk inspeksi atau layanan garansi.
Negara atau wilayah Anda harus sesuai dengan gudang pengiriman
Gudang Global
Untuk Gudang Global (termasuk Global-CN2), pesanan biasanya dikirim melalui pengiriman standar dalam 4 hingga 5 hari kerja, dan waktu pengiriman memakan waktu 20-25 hari.
Gudang AS (LA)
Untuk Gudang AS (LA), pesanan biasanya dikirim dalam 2 hingga 3 hari kerja. Pesanan dikirim ke Amerika Serikat melalui layanan USPS atau FedEx (Pengiriman Gratis untuk pesanan di atas $79), waktu pengiriman memerlukan 3-7 hari kerja. Kami juga mengirim ke Kanada melalui UPS, pengiriman biasanya memakan waktu 10-12 hari kerja, biaya pengiriman adalah $169.
Gudang AS
Untuk Gudang AS, pesanan biasanya dikirim dalam 1 hingga 2 hari kerja. Pesanan hanya dikirim ke Amerika Serikat melalui layanan USPS (Pengiriman Gratis untuk pesanan di atas $69), waktu pengiriman memerlukan 3-7 hari kerja.
Gudang UE
Untuk Gudang UE, pesanan biasanya dikirim dalam 1 hingga 2 hari kerja, waktu pengiriman memerlukan 5-10 hari kerja.
Gudang Inggris
Untuk Gudang Inggris, pesanan biasanya dikirim dalam 1 hingga 2 hari kerja. Pesanan hanya dikirim ke Inggris Raya melalui layanan Yodel/Hermes/DPD (Pengiriman Gratis untuk pesanan di atas $69), waktu pengiriman memerlukan 3-7 hari kerja.
Gudang AU
Untuk Gudang AU, pesanan biasanya dikirim dalam 1 hingga 2 hari kerja. Pesanan hanya dikirim ke Australia melalui layanan AU Post (Pengiriman Gratis untuk pesanan di atas $79). Waktu pengiriman memerlukan 3-7 hari kerja.
Gudang CA
Untuk Gudang CA, pesanan biasanya dikirim dalam 1 hingga 2 hari kerja. Pesanan hanya dikirim ke Kanada melalui layanan Amazon UPS/FedEx/CA Post (Pengiriman Gratis untuk pesanan di atas $99). Waktu pengiriman memerlukan 3-7 hari kerja.
He’s on my low C5 T3.0 set up and they are massively great
CNHL Innovation RC Series 10000mAh 22.2V 6S 100C Lipo Battery with EC5 Plug
dfjets
Finally!
The Horten 229 is one of my biggest fascinations in aviation and this parkflyer-size RC version is a dream come true! Although made of EPO, the quality of the model is very good and it comes with landing gear, battery, and carrying case. It's also good for static display. I haven't flown it yet as I'm waiting for my LiHV charger but I plan on getting a second one just in case.
That model is a masterpiece! From the aerodynamics over the details, light weight construction and the flawless handling qualities and impressive performance, all for a very fair price and in a cool package!
Get yours!
Opening the box was so exciting! The plane is beautiful. Amazingly light weight, but durable.
I am so enthusiastic about this, I will demonstrating mine in my booth in the C building, #3113, at the Oshkosh Air Show the week of July 20, 2026.
I will also be taking orders for them to benefit my charity, Friends of British Aviation Heritage, which is raising money to not only to help attach the wings to the real Horten 229, but to help with restoration of another plane soon to go on display in England.
I ordered 3x 2000mha and 3x 4000mha lipo batteries and a pack of deans to traxxas plug adapters.
Usps was slow on their scans, and shipping as usual. Customer service was able to help sort out the shipping.
My items arrived before the estimated flight delivery date, which was a surprise considering 😆.
Everything works perfect out of the package, except for 1 battery, which I will be contacting customer service about.
Even with the one battery that was bad... I've thoroughly enjoyed the batteries. They proved great run time and power. They haven't got hot, and my son and I run our trucks pretty hard lol 😆.
