
The Hobbywing FlyFun 30A Mini V5 is a compact brushless ESC designed for small RC airplanes, park flyers, lightweight fixed-wing aircraft, and compact electric setups that need a reliable 2–4S LiPo power controller. With a 30A continuous current rating, 45A peak current, and built-in 5V switch-mode BEC, it is a practical choice when space, weight, wiring simplicity, and clean throttle control matter.
Unlike larger FlyFun HV ESCs, this Mini version is built for smaller aircraft where every gram and every millimeter of installation space matters. Before installation, always check motor current, LiPo voltage, propeller or fan load, receiver and servo power demand, connector rating, cooling airflow, and available mounting space.
Key Features
- 30A Mini aircraft ESC: suitable for small fixed-wing aircraft, park flyers, lightweight sport planes, and compact electric setups when properly matched.
- 2–4S LiPo input range: works with common 2S, 3S, and 4S aircraft power systems.
- Built-in switch-mode BEC: 5V output with 3.5A continuous and 5A peak capability for compatible receiver and small servo systems.
- Compact and lightweight: approx. 23g with a small 37 × 17 × 5mm footprint for tight aircraft installations.
- DEO Technology / Active Freewheeling: helps improve throttle response, driving efficiency, throttle linearity, and ESC operating temperature.
- Programmable setup: adjustable parameters can be configured by Hobbywing LED program box or transmitter.
- Soft and Very Soft start-up modes: useful for small aircraft setups where smoother motor start-up is preferred.
- Multiple protections: includes start-up protection, ESC thermal protection, over-current protection, overload protection, abnormal input voltage protection, and throttle signal loss protection.
Product Specifications
| Brand | Hobbywing |
| Model | FlyFun 30A Mini V5 |
| ESC Type | Mini brushless ESC with built-in switch-mode BEC for RC aircraft |
| Continuous Current | 30A |
| Peak Current | 45A |
| Input Voltage | 2–4S LiPo |
| BEC Output | 5V, 3.5A continuous / 5A peak |
| BEC Type | Switch-mode BEC |
| Programming | Hobbywing LED program box or transmitter |
| Approx. Weight | 23g |
| Size (L × W × H) | 37 × 17 × 5mm |
| Stock Number | 30202307 |
Why Choose the FlyFun 30A Mini V5?
The FlyFun 30A Mini V5 is best suited for aircraft where a full-size ESC would be unnecessary or difficult to install. Its small 37 × 17 × 5mm body and approx. 23g weight make it useful for compact fixed-wing aircraft, lightweight park flyers, and small electric models where size and weight are part of the setup decision.
At the same time, it still belongs to the FlyFun V5 aircraft ESC family, so it is not just a basic small ESC. It gives pilots 2–4S LiPo support, a built-in 5V switch-mode BEC, programmable setup, DEO Technology, and protection features in a compact package.

30A Mini V5 vs 30A V5
The FlyFun 30A Mini V5 and FlyFun 30A V5 share the same 30A current class, but they are not aimed at exactly the same installation style. The Mini version is better when space and weight are the main limits. The regular 30A V5 is better when the aircraft has more room and a larger ESC body is acceptable.
| Choose 30A Mini V5 | If your aircraft has a tight ESC bay, needs a very compact controller, or benefits from the lighter 23g Mini layout. |
| Choose 30A V5 | If your aircraft has more installation space and you prefer the regular FlyFun 30A body layout. |
In simple terms, choose the Mini version when installation space and weight are the priority. Choose the regular 30A version when size is less restricted.
Built-in 5V BEC for Small Aircraft Electronics
The FlyFun 30A Mini V5 includes a 5V switch-mode BEC rated at 3.5A continuous and 5A peak. This can simplify wiring for small aircraft that use compatible receivers and small servo systems.
Because Mini aircraft setups can still vary widely, BEC load should not be ignored. Check the number of servos, servo type, receiver voltage requirement, flight controller or stabilizer use, and any added lights or accessories before final setup.
DEO Technology and Active Freewheeling
Hobbywing’s DEO Technology, also described as Active Freewheeling, is designed to improve driving efficiency, throttle response, and throttle linearity while helping reduce ESC operating temperature. For smaller aircraft, smoother throttle behavior can make power delivery feel more predictable and controlled.
For best results, DEO should be supported by a correct overall setup. Propeller size, motor KV, battery condition, cooling airflow, soldering quality, and connector rating all have a direct impact on ESC temperature and reliability.

Soft Start-up for Lightweight Aircraft
The FlyFun V5 platform includes Normal, Soft, and Very Soft start-up modes. For small fixed-wing aircraft and lightweight electric models, a smoother start-up mode can help reduce sudden load on the motor, ESC, battery, and propeller system.
Always match the start-up mode to the aircraft type, propeller load, motor behavior, and throttle feel you want during takeoff and general flying.
Programmable Parameters
The FlyFun 30A Mini V5 can be programmed with a Hobbywing LED program box or by transmitter. Adjustable setup items may include voltage cutoff type, LiPo cell setting, cutoff voltage, start-up mode, timing, motor direction, freewheeling, and factory reset options.
For field setup, the LED program box is usually the more convenient choice because it allows parameters to be checked and adjusted more directly. After changing parameters, power-cycle the ESC so the new settings can take effect.

Multiple Protection Functions
The FlyFun V5 platform includes protection features designed to help reduce damage risk during abnormal conditions. These include start-up protection, ESC thermal protection, over-current protection, overload protection, abnormal input voltage protection, and throttle signal loss protection.
Protection features are not a substitute for correct setup. If the ESC overheats, reduces output, stutters, or activates protection during use, check airflow, load, propeller choice, battery voltage, connectors, and motor condition before flying again.

Before You Install This ESC
- Check your aircraft manual and recommended ESC current rating.
- Confirm motor current draw under the selected propeller load.
- Use only a compatible 2–4S LiPo power setup.
- Confirm receiver and servo voltage requirements before using the built-in BEC.
- Estimate total BEC load, especially if using multiple servos, a stabilizer, lights, or accessories.
- Make sure the ESC has enough cooling airflow inside the aircraft.
- Confirm connector current rating and soldering quality before flight.
- Check installation space against the ESC size of 37 × 17 × 5mm.
- Recalibrate throttle range when using a new transmitter or ESC setup.
Recommended Collection Paths
For more ESC options, explore Hobbywing FlyFun ESCs, Hobbywing ESCs, and RC Airplane ESCs. For aircraft setups that need built-in receiver power, compare ESCs with BEC. For compact and lightweight aircraft, compare Mini ESCs. For setup accessories, visit ESC Programmers & Accessories.
User Manual
Download the official Hobbywing FlyFun ESC V5 user manual here: Hobbywing FlyFun ESC V5 User Manual.
FAQ
Does the FlyFun 30A Mini V5 have a built-in BEC?
Yes. It includes a 5V switch-mode BEC rated at 3.5A continuous and 5A peak. Always confirm your receiver, servo voltage range, and total BEC load before use.
Can I use the FlyFun 30A Mini V5 with a 4S LiPo battery?
Yes. This ESC supports 2–4S LiPo input. Make sure your motor, propeller, connector, battery discharge capability, and cooling setup are compatible with the expected current draw.
When should I choose the Mini version instead of the regular 30A version?
Choose the Mini version when your aircraft has limited ESC space or needs a lighter controller. Choose the regular 30A version when installation space is less restricted and a larger ESC body is acceptable.
Produkty CNHL mají 30denní lhůtu pro vrácení od data nákupu, pokud není v popisu produktu uvedeno jinak.
Tato záruka se vztahuje pouze na původní vady materiálu a zpracování a nepokrývá běžné opotřebení, poškození při havárii nebo vodou, položky, které byly upraveny, ani žádné škody vzniklé v důsledku nesprávného použití. Pokud zjistíte, že položka, kterou jste od nás zakoupili, je během této 30denní lhůty vadná, prosím kontaktujte nás pro vrácení položky k prohlídce. Obvykle položku opravíme nebo vyměníme bez poplatku na základě naší prohlídky. Zákazníci jsou odpovědní za náklady na dopravu při vracení produktů.
Vaše země nebo region musí odpovídat skladu, ze kterého se zásilka odesílá
US sklad
Pro US sklad jsou objednávky obvykle odesílány během 1 až 2 pracovních dnů. Objednávky jsou odesílány pouze do USA prostřednictvím služby USPS (doprava zdarma při objednávce nad 69 $), doba doručení je 3-7 pracovních dnů.
EU sklad
Pro EU sklad jsou objednávky obvykle odesílány během 1 až 2 pracovních dnů, doba doručení je 5-10 pracovních dnů.
UK sklad
Pro UK sklad jsou objednávky obvykle odesílány během 1 až 2 pracovních dnů. Objednávky jsou odesílány pouze do Velké Británie prostřednictvím služeb Yodel/Hermes/DPD (doprava zdarma při objednávce nad 69 $), doba doručení je 3-7 pracovních dnů.
Na některé oblasti mohou být účtovány dodatečné poplatky za dopravu, včetně Vysočiny a ostrovů, Kanálových ostrovů, Severního Irska, ostrova Man a ostrova Wight.
AU sklad
Pro AU sklad jsou objednávky obvykle odesílány během 1 až 2 pracovních dnů. Objednávky jsou odesílány pouze do Austrálie prostřednictvím služby AU Post (doprava zdarma při objednávce nad 79 $). Doba doručení je 3-7 pracovních dnů.
CA sklad
Pro CA sklad jsou objednávky obvykle odesílány během 1 až 2 pracovních dnů. Objednávky jsou odesílány pouze do Kanady prostřednictvím služby Amazon UPS/FedEx/CA Post (doprava zdarma při objednávce nad 99 $). Doba doručení je 3-7 pracovních dnů.
Globální sklad
Pro Globální sklad jsou objednávky obvykle odesílány standardní dopravou během 4 až 5 pracovních dnů a doba doručení trvá 15-25 dní.