A damaged horizontal stabilizer can make a “good-looking” aircraft feel unpredictable—especially on flare, slow approaches, or when you’re trying to dial in smooth elevator control. This Horizontal Stabilizer replacement is for CNHL Bison XT STOL 1750mm owners who want the tail back to straight, solid, and confidence-inspiring.
Part type: Horizontal stabilizer (tailplane) foam replacement
Common Reasons to Replace the Horizontal Stabilizer
Cracks near the stabilizer root after a tail-first bump or rough landing
Twist/warp that shows up as inconsistent elevator trim or “mushy” pitch feel
Damage from transport pressure (the tail is an easy spot to get bumped)
Foam fatigue after repeated repairs where alignment no longer stays true
Why Tail Alignment Matters on This Airframe
On a larger STOL-style model like the Bison, a small misalignment at the tail can show up as bigger “behavior changes” in the air—especially when you’re flying slower, using flaps, or trying to land short. If you’re rebuilding after an incident, it’s smart to check the fin and fuselage straightness too so the new stabilizer isn’t compensating for an unseen twist elsewhere.
Install Notes (Practical)
Dry fit first: confirm the stabilizer sits flush and square before final fastening.
Control check: after reassembly, confirm both elevator halves track evenly through full travel.
Re-check CG: after any tail repair, re-balance with your usual 6S pack position before the next flight.
Produk CNHL dilengkapi dengan garansi 90 hari sejak tanggal pembelian, kecuali dinyatakan lain dalam daftar produk.
Garansi ini mencakup cacat asli pada bahan dan pengerjaan. Garansi ini tidak mencakup keausan dan kerusakan normal, pembengkakan, pembengkakan, pengosongan berlebih, pengisian berlebih, penyimpanan yang tidak tepat, kerusakan akibat benturan atau air, perubahan konektor, atau kerusakan apa pun yang diakibatkan oleh penyalahgunaan atau penanganan yang salah.
Jika Anda menemukan bahwa produk yang dibeli dari kami cacat dalam periode garansi 90 hari, silakan hubungi kami untuk mengatur pengembalian untuk inspeksi. Berdasarkan evaluasi kami, kami biasanya akan memperbaiki, mengganti, atau menawarkan solusi yang sesuai tanpa biaya tambahan.
Harap dicatat bahwa pelanggan bertanggung jawab atas biaya pengiriman saat mengembalikan produk untuk inspeksi atau layanan garansi.
Negara atau wilayah Anda harus sesuai dengan gudang pengiriman
Gudang Global
Untuk Gudang Global (termasuk Global-CN2), pesanan biasanya dikirim melalui pengiriman standar dalam 4 hingga 5 hari kerja, dan waktu pengiriman memakan waktu 20-25 hari.
Gudang AS (LA)
Untuk Gudang AS (LA), pesanan biasanya dikirim dalam 2 hingga 3 hari kerja. Pesanan dikirim ke Amerika Serikat melalui layanan USPS atau FedEx (Pengiriman Gratis untuk pesanan di atas $79), waktu pengiriman memerlukan 3-7 hari kerja. Kami juga mengirim ke Kanada melalui UPS, pengiriman biasanya memakan waktu 10-12 hari kerja, biaya pengiriman adalah $169.
Gudang AS
Untuk Gudang AS, pesanan biasanya dikirim dalam 1 hingga 2 hari kerja. Pesanan hanya dikirim ke Amerika Serikat melalui layanan USPS (Pengiriman Gratis untuk pesanan di atas $69), waktu pengiriman memerlukan 3-7 hari kerja.
Gudang UE
Untuk Gudang UE, pesanan biasanya dikirim dalam 1 hingga 2 hari kerja, waktu pengiriman memerlukan 5-10 hari kerja.
Gudang Inggris
Untuk Gudang Inggris, pesanan biasanya dikirim dalam 1 hingga 2 hari kerja. Pesanan hanya dikirim ke Inggris Raya melalui layanan Yodel/Hermes/DPD (Pengiriman Gratis untuk pesanan di atas $69), waktu pengiriman memerlukan 3-7 hari kerja.
Gudang AU
Untuk Gudang AU, pesanan biasanya dikirim dalam 1 hingga 2 hari kerja. Pesanan hanya dikirim ke Australia melalui layanan AU Post (Pengiriman Gratis untuk pesanan di atas $79). Waktu pengiriman memerlukan 3-7 hari kerja.
Gudang CA
Untuk Gudang CA, pesanan biasanya dikirim dalam 1 hingga 2 hari kerja. Pesanan hanya dikirim ke Kanada melalui layanan Amazon UPS/FedEx/CA Post (Pengiriman Gratis untuk pesanan di atas $99). Waktu pengiriman memerlukan 3-7 hari kerja.
Great deal on this battery is the main reason I purchased it alongside the 5000mAH 100C 6S battery. Seems to give the same performance I need in my Team Corally Shiroi!
perfect size for my Team Corally Shiroi. Has plenty of punch and last a long time. Been through 3 charges so far and I have no issues with the battery and I hope that continues!
So far so good! Ive only had 2 runs on this pack so far, but its giving me the same runtimes as my gens ace 8000mah. Fits Typhon 223s and bigrock 223s perfectly.
CNHL Racing Series 8000mAh 11.1V 3S 120C Hard Case Lipo Battery with EC5 Plug
Badaka
These batteries are top quality and are perfect
These batteries are top quality and are perfect for my Spark XB6.
Shopping on the CNHL website is easy and the shipping is fast.
I’m a repeat customer.
CNHL Racing Series 5200mAh 6S 22.2V LiPo Battery 90C with XT90 Plug
Danny
Perfect Fit for Arrma Quake 223s
New to the RC hobby, I needed a battery to fit my brand new Arrma Quake 223s. I struggled to find a large capacity battery that seemed it would fit the dimensions the Quake manual says it will accommodate. This is basically the only website I could find that had a page specifically for the Quake, which was awesome to see. Even though the dimensions of this battery were slightly larger than what Arrma said would fit, it I rolled the dice and bought 2. Yes, both fit! It’s snug, and the only way they really fit is by moving the stock Quake connector to the top of the vehicle (instead of in the battery tray where it starts out—check YouTube for a guide on how to do it; very simple—one screw needs moved). Even after doing this, it’s TIGHT in there. The best way to get it to fit is to plug the battery in, then rest the battery on the underside of the tray (the top of the tray if the vehicle is belly-side down) and then kind of pop the tray in along with the battery. Alternatively, it looks like you can make it much easier to fit the car by trimming the two rounded “nubs” on the Quake battery tray, but I don’t really like to modify in ways that are permanent so I’ll keep doing it this way.
If you need something for the Quake, THIS IS IT! I ran it hard for about 45 mins at 75% the other day and when I plugged it into my D300 charger, it said it was at ~40%. I should also state, the Quake is very hard to control (for a noob) on a 3s battery of this caliber, hence why I said I ran it at 75%, but I still say avoid 2s and go big because you can always limit the power via the transmitter like I do.
CNHL Racing Series 8000mAh 11.1V 3S 120C Hard Case Lipo Battery with EC5 Plug
