The CNHL STUPV2005 is a replacement main wing mounting brackets and hardware set for the AviNationRC Super Tucano V2 1600mm RC plane. These wing attachment and fixing components are installed at the wing-to-fuselage joint to help secure and reinforce the main wing assembly.
The set includes two main wing mounting brackets, one reinforcement plate and six mounting screws as shown in the product image. It is a practical replacement when the original wing fixing hardware has been damaged, lost or removed during wing or fuselage repair.
Because this hardware forms part of the Super Tucano V2 wing mounting system, correct alignment and secure installation are important before the aircraft is returned to flight.
Quick Fit Check
Part
Replacement Main Wing Mounting Brackets & Hardware Set
Compatible Aircraft
CNHL AviNationRC Super Tucano V2 1600mm PNP
Main Wing Mounting Brackets
2 included
Reinforcement Plate
1 included
Mounting Screws
6 included
Application
Main wing-to-fuselage mounting and reinforcement
Stock Number
STUPV2005
CNHL Super Tucano V2 Replacement Wing Mounting Hardware
STUPV2005 is used at the main wing and fuselage joining area of the Super Tucano V2. The two mounting brackets sit across the wing attachment points, while the reinforcement plate and screws help secure the joint and maintain the intended mounting arrangement.
This set is especially useful after replacing a wing or fuselage section, or when the original wing fixing parts have been damaged during disassembly, transport or repair.
Main Wing-to-Fuselage Fixing System
The Super Tucano V2 uses dedicated hardware at the main wing-to-fuselage joint. These brackets and fixing parts help keep the wing correctly positioned while providing a secure mechanical connection at the attachment area.
During installation, make sure the wing and fuselage are correctly aligned before tightening the screws. The brackets should sit flat against the intended mounting surfaces without forcing or distorting the surrounding foam structure.
This replacement hardware set is designed around the Super Tucano V2 wing mounting arrangement.
For replacement wings, fuselage sections, landing gear, cockpit parts, propeller components and other aircraft hardware, browse the Super Tucano V1 & V2 spare parts collection.
Confirm the main wing and fuselage are correctly aligned before installing the hardware.
Make sure both mounting brackets sit flat against the intended attachment points.
Position the reinforcement plate correctly before tightening the screws.
Tighten the screws evenly without crushing or deforming the surrounding foam.
Check the complete wing-to-fuselage joint for movement, gaps or looseness.
Inspect nearby wiring and control connections after installation.
Re-check wing alignment and aircraft CG before flight.
Package Includes
2 × CNHL Super Tucano V2 main wing mounting brackets
1 × Reinforcement plate
6 × Mounting screws
Notice: This listing includes only the replacement main wing mounting brackets, reinforcement plate and screws shown. Main wing, fuselage, adhesive and other aircraft components are not included unless specifically shown.
Produk CNHL dilengkapi dengan garansi 90 hari sejak tanggal pembelian, kecuali dinyatakan lain dalam daftar produk.
Garansi ini mencakup cacat asli pada bahan dan pengerjaan. Garansi ini tidak mencakup keausan dan kerusakan normal, pembengkakan, pembengkakan, pengosongan berlebih, pengisian berlebih, penyimpanan yang tidak tepat, kerusakan akibat benturan atau air, perubahan konektor, atau kerusakan apa pun yang diakibatkan oleh penyalahgunaan atau penanganan yang salah.
Jika Anda menemukan bahwa produk yang dibeli dari kami cacat dalam periode garansi 90 hari, silakan hubungi kami untuk mengatur pengembalian untuk inspeksi. Berdasarkan evaluasi kami, kami biasanya akan memperbaiki, mengganti, atau menawarkan solusi yang sesuai tanpa biaya tambahan.
Harap dicatat bahwa pelanggan bertanggung jawab atas biaya pengiriman saat mengembalikan produk untuk inspeksi atau layanan garansi.
Negara atau wilayah Anda harus sesuai dengan gudang pengiriman
Gudang Global
Untuk Gudang Global (termasuk Global-CN2), pesanan biasanya dikirim melalui pengiriman standar dalam 4 hingga 5 hari kerja, dan waktu pengiriman memakan waktu 20-25 hari.
Gudang AS (LA)
Untuk Gudang AS (LA), pesanan biasanya dikirim dalam 2 hingga 3 hari kerja. Pesanan dikirim ke Amerika Serikat melalui layanan USPS atau FedEx (Pengiriman Gratis untuk pesanan di atas $79), waktu pengiriman memerlukan 3-7 hari kerja. Kami juga mengirim ke Kanada melalui UPS, pengiriman biasanya memakan waktu 10-12 hari kerja, biaya pengiriman adalah $169.
Gudang AS
Untuk Gudang AS, pesanan biasanya dikirim dalam 1 hingga 2 hari kerja. Pesanan hanya dikirim ke Amerika Serikat melalui layanan USPS (Pengiriman Gratis untuk pesanan di atas $69), waktu pengiriman memerlukan 3-7 hari kerja.
Gudang UE
Untuk Gudang UE, pesanan biasanya dikirim dalam 1 hingga 2 hari kerja, waktu pengiriman memerlukan 5-10 hari kerja.
Gudang Inggris
Untuk Gudang Inggris, pesanan biasanya dikirim dalam 1 hingga 2 hari kerja. Pesanan hanya dikirim ke Inggris Raya melalui layanan Yodel/Hermes/DPD (Pengiriman Gratis untuk pesanan di atas $69), waktu pengiriman memerlukan 3-7 hari kerja.
Gudang AU
Untuk Gudang AU, pesanan biasanya dikirim dalam 1 hingga 2 hari kerja. Pesanan hanya dikirim ke Australia melalui layanan AU Post (Pengiriman Gratis untuk pesanan di atas $79). Waktu pengiriman memerlukan 3-7 hari kerja.
Gudang CA
Untuk Gudang CA, pesanan biasanya dikirim dalam 1 hingga 2 hari kerja. Pesanan hanya dikirim ke Kanada melalui layanan Amazon UPS/FedEx/CA Post (Pengiriman Gratis untuk pesanan di atas $99). Waktu pengiriman memerlukan 3-7 hari kerja.
I love my V1 so I ordered the V2 as soon as I could!!!!
I love my V1 so I ordered the V2 as soon as I could when it was available in the USA. I was NOT notified via email that I would need to please or solder new connectors for my "first batch" model. I found out via Facebook :(. However CNHL customer service has been above and beyond making sure they make it right by me. Jasmine was awesome! If the v2 flies 1/2 as good as the v1 this plane will be a winner! The upgraded retracts are my favorite new upgrade, gear door is kinda of. let down ...should be automatically sequenced with gears ... the reverse thrust option is nice as well! I recommend the Airplane for pilots who ENJOY a true locked in airframe.
CNHL AviNationRC Super Tucano V2 1600mm PNP RC Plane with All-Metal Retracts
Title: Impressive Voltage Sag Performance Under Heavy Loads
I tested two CNHL Lightning 6S 6000mAh LiHV batteries against four ManiaX 6S 5800mAh HV packs in my SAB ilGoblin 590, equipped with a Scorpion motor, Tribunus III ESC, and VBar telemetry logging.
Both battery types were purchased new for this helicopter and had undergone several charge/discharge cycles before testing. Their manufacturing dates were unknown, so previous storage-related aging could not be determined.
Internal Resistance
* CNHL: approximately 3.5mΩ/cell
* ManiaX: approximately 1.9–2.1mΩ/cell
Based on these readings, I initially expected ManiaX to perform better under heavy loads. However, the actual flight logs showed some surprising results.
All voltage/current pairs are simultaneous measurements from the VBar logs.
Interestingly, the CNHL packs maintained 19.9V at approximately 150–159A, despite having already discharged around 1,000–1,500mAh.
The ManiaX packs experienced greater voltage sag at similar current levels, even though the selected high-load events occurred relatively early in their discharge cycles.
Low-Load Performance
At moderate loads of approximately 30–50A, ManiaX generally maintained slightly higher voltage, consistent with its lower charger-measured internal resistance.
However, this advantage was less apparent during the highest-current events. State-of-charge differences also affect these comparisons.
Important Test Conditions
The CNHL tests were conducted at approximately 18°C, while the ManiaX tests were performed at approximately 10°C.
These were estimated ambient temperatures, not measured battery temperatures. Lower temperatures can significantly increase voltage sag, so the results cannot establish that CNHL is inherently superior under identical conditions.
The tests were conducted on different dates with different flight profiles.
Weight and Usable Capacity
* CNHL: approximately 710g / 6000mAh
* ManiaX: approximately 820g / 5800mAh
The CNHL is about 110g lighter per pack.
Using my normal discharge limits, both batteries provide nearly identical practical usable capacity of approximately 3,950mAh, targeting around 3.80V per cell after resting.
Final Verdict
Despite its higher measured internal resistance, the CNHL Lightning delivered excellent high-current performance in my actual flight tests.
While ManiaX generally showed slightly better voltage retention under moderate loads, CNHL remained highly competitive during aggressive collective pitch maneuvers.
The temperature difference prevents a definitive conclusion about which battery has intrinsically lower voltage sag. Nevertheless, CNHL’s combination of strong high-load performance, significantly lower weight, and excellent value makes it a very impressive battery.
I’m extremely satisfied with the CNHL Lightning 6000mAh and would definitely buy it again.
Full VBar telemetry graphs showing RPM, voltage, current, and ESC PWM are attached for reference.
Surprisingly Good High-Load Performance for the Price
I’ve been testing the CNHL Lightning 6S 6000mAh LiHV batteries against ManiaX 6S 5800mAh HV packs in my SAB ilGoblin 590, using a Scorpion motor and a Scorpion Tribunus ESC with VBar telemetry logging.
My main focus was voltage sag under heavy collective pitch loads, with peak currents reaching approximately 150–160A.
Interestingly, the CNHL packs measured around 3.5mΩ per cell on my charger, compared to approximately 2mΩ for the ManiaX packs. Based on these readings, I initially expected the ManiaX batteries to maintain voltage better.
However, in some of my high-load flight logs, the CNHL maintained approximately 19.9V at around 150A, while the ManiaX dropped to approximately 19.4–19.8V under similar current loads.
One important limitation is that the tests were performed under different conditions. The ManiaX tests were conducted at approximately 10°C, while the CNHL tests were around 18°C. Battery temperature can significantly influence voltage sag, so this was not a perfectly controlled comparison.
Results also varied between flights, but overall I found the CNHL’s high-load performance very competitive with the more expensive ManiaX packs.
Another significant advantage is weight. My CNHL packs weigh approximately 710g, compared to 820g for the ManiaX — a saving of around 110g per pack.
Despite the slightly different rated capacities, both batteries also provided very similar usable capacity in my setup.
Overall, I’m impressed with the CNHL Lightning 6000mAh. It offers competitive high-current performance, noticeably lower weight, and excellent value for money. I would definitely consider buying more.
Spedizione super veloce 2 confezioni lipo 3s 2200 shorty
Spedizione super veloce e ben confezionate e graditi gli adesivi inclusi. Ho già acquistato batterie che uso già da tempo e sono molto affidabili e ora proverò per la prima volta il tipo shorty.
CNHL Black Series 2200mAh 11.1V 3S Shorty Lipo Battery 40C with XT60 Plug
Anonymous
Great quality and exceptional value.
Ideal power to weight ratio for long flight times plus plenty of punch when needed.
Heavy 5" Freestyle with 5037 Pizza Cutters easily manages 5 minutes flight time cruising around at 80kph with this pack.
Plus, CNHL customer service communication is fantastic.
CNHL Speedy Pizza Series Pro 1350mAh 22.2V 6S 150C Lipo Battery with XT60 Plug
