The Hobbywing QuicRun 0880 Dual Brushed ESC is designed for RC platforms that need one electronic speed controller to power two brushed motors simultaneously. With support for 2S to 4S LiPo power, 540/550/775-size brushed motors and a broad range of 1/10 and 1/8 scale applications, it is particularly useful for dual-motor crawlers, tanks and other high-load brushed RC builds.
Unlike a conventional single-motor brushed ESC, the dual-output design provides two motor output pairs controlled from the same throttle signal. This makes installation considerably cleaner in vehicles where both motors are intended to operate together.
Quick Fit Check
| Product | Hobbywing QuicRun 0880 / WP-860 Dual Brushed ESC |
| SKU | 30120301 |
| Motor Type | Brushed — dual motor output |
| Scale | 1/10 & 1/8 |
| LiPo Support | 2S–4S LiPo |
| Continuous / Peak Current | 60A / 360A |
| BEC | 5V / 3A Switch-Mode |
| Waterproof | Yes |
One ESC for Two Brushed Motors
The defining feature of the QuicRun 0880 Dual Brushed ESC is its pair of motor outputs. Both brushed motors are driven from one ESC and respond to the same throttle channel, making this layout ideal for vehicles where two motors need to work together.
Important: the two outputs are not independently controlled. Both motors respond to the same throttle command.
60A Brushed Power for 1/10 and 1/8 RC Models
With a rated 60A continuous and 360A peak current, the QuicRun dual brushed ESC is designed for significantly larger brushed power systems than compact 1/16 or 1/18 ESCs. It can be used across a broad range of 1/10 and 1/8 scale RC platforms.
Typical applications include:
- 1/10 and 1/8 rock crawlers
- Dual-motor crawler builds
- MOA-style crawler configurations
- RC tanks
- Touring cars
- Buggies and truggies
- Monster trucks
- Short-course style trucks
2S to 4S LiPo Support
The QuicRun 0880 Dual Brushed supports 2S, 3S and 4S LiPo batteries as well as compatible NiMH packs. The allowable motor load changes with battery voltage, so motor speed and turn count should always be matched to the battery being used.
| 2S LiPo / 6-cell NiMH | 540 / 550 / 775 brushed motor: ≥12T or below 30,000 RPM @ 7.2V |
| 3S LiPo / 9-cell NiMH | 540 / 550 / 775 brushed motor: ≥18T or below 20,000 RPM @ 7.2V |
| 4S LiPo / 12-cell NiMH | 540 / 550 / 775 brushed motor: ≥24T or below 15,000 RPM @ 7.2V |
Dual-motor note: when two motors are connected simultaneously, use a more conservative motor load than you would with a single motor. The combined load of both motors must remain within the capability of the ESC.
Multiple Running Modes
The ESC can be configured for different driving applications instead of being locked into a single forward/reverse behavior. Depending on the model, this allows the throttle and braking behavior to be adapted for conventional vehicles, crawlers, tanks and other brushed RC platforms.
Adjustable Drag Brake and Throttle Response
This is more than a basic dual-motor brushed controller. Adjustable drag brake behavior makes the ESC particularly useful for crawlers, where holding force and the way the vehicle settles when the throttle returns to neutral can have a noticeable effect on control.
The ESC also provides adjustable acceleration and braking parameters, allowing the response to be tuned from softer and easier to control to more aggressive settings depending on the vehicle, gearing and terrain.
5V 3A Switch-Mode BEC
The integrated 5V / 3A switch-mode BEC supplies receiver and servo power directly from the ESC, eliminating the need for a separate receiver battery in many conventional installations.
Always verify the voltage and current requirements of your receiver, steering servo and auxiliary electronics before connecting them.
Waterproof Design for Demanding RC Use
The waterproof and dust-resistant construction allows the QuicRun 0880 Dual Brushed to be used in wet, muddy, dusty and other demanding RC environments.
Waterproof protection should not be interpreted as maintenance-free operation. After running in water, mud or snow, clean and thoroughly dry the ESC, motor connectors and exposed metal hardware to reduce the possibility of corrosion.
Reliable Heat Dissipation for High-Load Brushed Systems
The aluminum heat sink helps transfer heat away from the ESC electronics during sustained load. This is particularly important in heavy vehicles, high-traction conditions and dual-motor configurations where the ESC may spend long periods operating under substantial current.
LED Program Card Support
An independent programming port allows compatible Hobbywing LED programming cards to be connected without disturbing the receiver wiring. This provides a more convenient way to adjust supported ESC parameters than repeatedly changing wiring or transmitter settings.
The LED programming card is sold separately.
Product Specifications
| Model | QuicRun WP-860 / 0880 Dual Brushed |
| Product Number | 30120301 |
| Motor Type | Brushed |
| Motor Outputs | Dual output — two brushed motors |
| Continuous / Peak Current | 60A / 360A |
| Battery | 2–4S LiPo / 5–12 cell NiMH |
| BEC Output | 5V / 3A Switch-Mode |
| Supported Motor Sizes | 540 / 550 / 775 brushed motors |
| Input Connector | No factory battery connector |
| Motor Connectors | 4.0mm female bullet connectors |
| Programming | Hobbywing LED Program Card via independent port |
| Waterproof | Yes |
| Cooling Fan | No fan |
| Dimensions | 46.5 × 34 × 28.5mm |
| Applications | 1/10 & 1/8 brushed RC vehicles, crawlers, tanks and dual-motor builds |
Is the QuicRun 0880 Dual Brushed Right for Your Build?
Choose this ESC when your project requires a high-current brushed controller with two synchronized motor outputs. It is especially attractive for dual-motor crawler and tank builds where using two separate ESCs would add unnecessary wiring and setup complexity.
For a conventional single-motor RC vehicle, a smaller single-output ESC may be simpler. The primary reason to choose the 0880 Dual Brushed is its combination of dual motor capability, 2–4S battery support, crawler-oriented adjustment and large-scale brushed motor compatibility.
FAQ
Can the QuicRun 0880 control two brushed motors?
Yes. It has two brushed motor outputs and is designed to operate two motors simultaneously.
Can the two motors be controlled independently?
No. Both motor outputs receive the same throttle command and therefore operate together.
Does it support 4S LiPo?
Yes. The ESC supports up to 4S LiPo, but the allowable brushed motor speed and turn count become more restrictive as battery voltage increases.
Can I use a 775 brushed motor?
Yes. 540, 550 and 775-size brushed motors are supported, provided the motor RPM, battery voltage and total load remain within the specified limits.
Is this ESC suitable for a dual-motor crawler?
Yes. Dual-motor crawler and tank applications are among the strongest reasons to choose this ESC because both brushed motors can be driven from one controller.
Is it waterproof?
Yes, but wet-operation maintenance is still required. Clean and dry the ESC and connectors after use in water, mud or snow to minimize corrosion.
What programming device does it support?
The ESC supports the Hobbywing LED Program Card through its independent programming port.
Manual & Setup Information
Download the Hobbywing QuicRun 0880 Dual Brushed ESC Manual
Explore More Hobbywing ESCs & Programming Accessories
Looking for more Hobbywing electronic speed controllers for different RC applications? Explore our Hobbywing ESC collection for additional brushed and brushless speed-control options.
You can also browse the Hobbywing QuicRun ESC collection to compare other QuicRun models designed for RC cars, crawlers and other surface vehicles.
For compatible setup and tuning tools, visit our ESC Programmers & Accessories collection.
Important Setup Notes
- Both motor outputs operate from the same throttle channel and cannot be independently controlled.
- When running two motors, select a conservative motor load because the combined current demand is handled by one ESC.
- Observe the specified motor RPM / turn limits for 2S, 3S and 4S operation.
- Confirm battery polarity before powering the ESC.
- Keep all motor and battery connections securely insulated.
- Clean and dry connectors after operation in wet, muddy or snowy environments.
Produk CNHL dilengkapi dengan pengembalian selama 30 hari sejak tanggal pembelian kecuali dinyatakan lain dalam daftar produk.
Garansi ini terbatas pada cacat asli dalam bahan dan pengerjaan, dan tidak mencakup keausan dan kerusakan normal, kerusakan akibat kecelakaan atau air, barang yang telah dimodifikasi, atau kerusakan yang timbul akibat penggunaan yang tidak tepat. Jika Anda menemukan bahwa barang yang Anda beli dari kami cacat dalam periode 30 hari tersebut, silakan hubungi kami untuk mengembalikan barang tersebut untuk pemeriksaan. Kami biasanya akan memperbaiki atau mengganti barang tanpa biaya berdasarkan pemeriksaan kami. Pelanggan bertanggung jawab atas biaya pengiriman saat mengembalikan produk.
Negara atau wilayah Anda harus sesuai dengan gudang pengiriman
Gudang US
Untuk Gudang US, pesanan biasanya dikirim dalam 1 hingga 2 hari kerja. Pesanan hanya dikirim ke United Status melalui layanan USPS (Pengiriman Gratis untuk pesanan di atas $69), waktu pengiriman memerlukan 3-7 hari kerja.
Gudang EU
Untuk Gudang EU, pesanan biasanya dikirim dalam 1 hingga 2 hari kerja, waktu pengiriman memerlukan 5-10 hari kerja.
Gudang UK
Untuk Gudang UK, pesanan biasanya dikirim dalam 1 hingga 2 hari kerja. Pesanan hanya dikirim ke United Kingdom melalui layanan Yodel/Hermes/DPD (Pengiriman Gratis untuk pesanan di atas $69), waktu pengiriman memerlukan 3-7 hari kerja.
Biaya pengiriman tambahan mungkin berlaku untuk area tertentu, termasuk Highlands & Islands, Channel Islands, Northern Ireland, Isle of Man, dan Isle of Wight.
Gudang AU
Untuk Gudang AU, pesanan biasanya dikirim dalam 1 hingga 2 hari kerja. Pesanan hanya dikirim ke Australia melalui layanan AU Post (Pengiriman Gratis untuk pesanan di atas $79). Waktu pengiriman memerlukan 3-7 hari kerja.
Gudang CA
Untuk Gudang CA, pesanan biasanya dikirim dalam 1 hingga 2 hari kerja. Pesanan hanya dikirim ke Kanada melalui layanan Amazon UPS/FedEx/CA Post (Pengiriman Gratis untuk pesanan di atas $99). Waktu pengiriman memerlukan 3-7 hari kerja.
Gudang Global
Untuk Gudang Global, pesanan biasanya dikirim melalui pengiriman standar dalam 4 hingga 5 hari kerja, dan waktu pengiriman memakan waktu 15-25 hari.