The ISDT Q8 Max is a compact high-power DC smart charger built for RC users who need substantially more charging headroom without moving to a large bench charger. With up to 1000W maximum charging power, a 0.2–30A charging range and support for LiPo, LiIon and LiFe batteries up to 8S, it is well suited to high-capacity and higher-voltage RC battery setups.
Despite its compact 95 × 95 × 45mm body, the Q8 Max combines balance charging, discharging, storage, battery destroy mode, DC power-supply operation, BattGo support, an IPS display, USB output and firmware upgrade capability in one charger.
For users comparing high-power options, the Q8 Max sits naturally between portable field chargers and larger multi-channel charging stations: it is a single-channel DC charger focused on delivering substantial power from a small footprint.
1000W High-Power Charging in a Compact DC Charger
The headline specification of the ISDT Q8 Max is its 1000W maximum charging power. Charging current is adjustable from 0.2A to 30A, while the charger accepts a DC input from 10–34V with a maximum input current of 33A.
That makes the Q8 Max especially relevant for larger 6S and 8S packs where lower-powered chargers can become the bottleneck. Actual available charging power still depends on the capability and voltage of the connected DC power source, so the charger input-power setting should be matched to the supply being used.
Important: 33A is the Q8 Max maximum input current. Maximum battery charging current is 30A.
1–8S LiPo Support for High-Power RC Battery Setups
Battery compatibility extends well beyond standard LiPo packs. The Q8 Max supports LiFe, LiIon and LiPo from 1–8S, LiHV from 1–7S, Pb batteries from 1–12S, and NiMH/NiCd packs from 1–16S.
For lithium packs, connecting the balance lead is strongly recommended during balance charging so the charger can monitor individual cell voltage and balance cells throughout the charging process.
IPS Display with Clear Cell and Charging Data
The color IPS display presents charging information directly on the charger, including cell voltage, operating parameters and battery information. The interface can also display individual cell internal resistance when balance charging is in use.
Auto-brightness adjustment and a wide viewing angle make the display easier to read across different lighting conditions, including outdoor RC field use.
Advanced Cross-Flow Cooling for Sustained High Power
High charger output also creates heat, so cooling is a major part of the Q8 Max design. Its internal cooling system combines an active cross-flow air duct, fan, aluminum heat-dissipation structure and thermal interface materials to move heat away from the power electronics.
This internal architecture allows ISDT to package high charging performance inside the charger’s relatively small enclosure while maintaining airflow through the body.
More Than Charging: Discharge, Storage, Destroy and DC Power Supply Modes
The Q8 Max is not limited to normal charging. Its task menu includes Charge, Discharge, Storage, Destroy and DC Power Supply modes, making it useful for both routine battery maintenance and workshop tasks.
Discharge current is adjustable from 0.2–3.0A, with up to 30W maximum discharge power. Storage mode can be used to bring supported batteries toward their appropriate storage condition when packs will not be used immediately.
In DC Power Supply mode, the charger can provide an adjustable output from 2–30V and 1–5A, giving the Q8 Max additional usefulness on an RC workbench.
BattGo Smart Battery Support
The Q8 Max supports BattGo input and output communication. When a compatible BattGo battery is connected, battery type, cell count and charging or discharging parameters can be populated automatically, reducing repetitive manual setup.
5V/2A USB Output for Mobile Devices
A built-in 5V/2A USB output adds a useful field feature, allowing the Q8 Max to supply power to compatible mobile devices while your DC charging setup is already running.
Upgradeable Firmware via Micro USB
ISDT includes a dedicated Micro USB update port so charger firmware can be updated from a computer. Firmware support gives the Q8 Max a path for software improvements and feature updates over its service life.
Compact 95 × 95mm Footprint for Bench or Field Charging
At approximately 95 × 95 × 45mm and 290g, the Q8 Max offers an unusually compact footprint for a charger rated at up to 1000W. The rounded enclosure also makes it easier to pack into an RC field bag alongside batteries, adapters and charging leads.
ISDT Q8 Max Specifications
| Model |
ISDT Q8 Max |
| Input Voltage |
DC 10–34V |
| Output Voltage |
DC 1–34V |
| Max Input Current |
33A |
| Charging Current |
0.2–30.0A |
| Max Charging Power |
1000W |
| Discharge Current |
0.2–3.0A |
| Max Discharge Power |
30W |
| Balance Current |
1.5A/Cell Max |
| LiFe / LiIon / LiPo |
1–8S |
| LiHV |
1–7S |
| Pb |
1–12S |
| NiMH / NiCd |
1–16S |
| DC Power Supply Mode |
2–30V / 1–5A adjustable |
| USB Output |
5V / 2A |
| BattGo |
Input and Output Supported |
| Working Temperature |
0°C to 40°C |
| Storage Temperature |
-20°C to 60°C |
| Dimensions |
95 × 95 × 45mm |
| Weight |
Approx. 290g |
Who Is the ISDT Q8 Max Best For?
The Q8 Max makes the most sense for RC users who already have a capable external DC power source and want substantially more charging power than a small entry-level field charger can provide. Its 8S capability also makes it relevant to larger RC airplanes, EDF jets, helicopters, drones, cars and boats using high-voltage battery systems.
Because this is a DC charger rather than an AC charger, the power source matters. To approach the charger’s maximum output, use an appropriately rated DC supply and configure the Q8 Max maximum input-power setting to match that supply.
Explore More RC Battery Chargers
Compare the Q8 Max with more ISDT chargers, or browse chargers by power-input and battery requirements:
DC LiPo Battery Chargers ·
8S LiPo Battery Chargers ·
All LiPo Battery Chargers
ISDT Q8 Max FAQ
Is the ISDT Q8 Max an 8S LiPo charger?
Yes. It supports LiPo, LiIon and LiFe batteries from 1–8S. LiHV support is 1–7S.
Does the Q8 Max really charge at 33A?
No. The charger’s maximum input current is 33A. Battery charging current is adjustable from 0.2A to 30A.
Does the ISDT Q8 Max require an external power supply?
The Q8 Max is a DC-input charger with a 10–34V input range. Available charging power depends on the connected DC source.
Can the Q8 Max work as a DC power supply?
Yes. DC Power Supply mode provides adjustable 2–30V output with a 1–5A current range.
Does it support storage charging and battery disposal?
Yes. Task modes include Charge, Discharge, Storage and Destroy. Destroy mode is intended for batteries that are being prepared for disposal and can discharge the connected battery toward 0V.
Does the Q8 Max support firmware updates?
Yes. A dedicated Micro USB update port is provided for connecting the charger to a computer for firmware updates.
Negara atau wilayah Anda harus sesuai dengan gudang pengiriman
Gudang US
Untuk Gudang US, pesanan biasanya dikirim dalam 1 hingga 2 hari kerja. Pesanan hanya dikirim ke United Status melalui layanan USPS (Pengiriman Gratis untuk pesanan di atas $69), waktu pengiriman memerlukan 3-7 hari kerja.
Gudang EU
Untuk Gudang EU, pesanan biasanya dikirim dalam 1 hingga 2 hari kerja, waktu pengiriman memerlukan 5-10 hari kerja.
Gudang UK
Untuk Gudang UK, pesanan biasanya dikirim dalam 1 hingga 2 hari kerja. Pesanan hanya dikirim ke United Kingdom melalui layanan Yodel/Hermes/DPD (Pengiriman Gratis untuk pesanan di atas $69), waktu pengiriman memerlukan 3-7 hari kerja.
Biaya pengiriman tambahan mungkin berlaku untuk area tertentu, termasuk Highlands & Islands, Channel Islands, Northern Ireland, Isle of Man, dan Isle of Wight.
Gudang AU
Untuk Gudang AU, pesanan biasanya dikirim dalam 1 hingga 2 hari kerja. Pesanan hanya dikirim ke Australia melalui layanan AU Post (Pengiriman Gratis untuk pesanan di atas $79). Waktu pengiriman memerlukan 3-7 hari kerja.
Gudang CA
Untuk Gudang CA, pesanan biasanya dikirim dalam 1 hingga 2 hari kerja. Pesanan hanya dikirim ke Kanada melalui layanan Amazon UPS/FedEx/CA Post (Pengiriman Gratis untuk pesanan di atas $99). Waktu pengiriman memerlukan 3-7 hari kerja.
Gudang Global
Untuk Gudang Global, pesanan biasanya dikirim melalui pengiriman standar dalam 4 hingga 5 hari kerja, dan waktu pengiriman memakan waktu 15-25 hari.
