Quick Fit Check
The CNHL Lightning LiHV 2400mAh 11.4V 3S 120C HV Shorty LiPo Battery with XT60 Plug is a compact high-voltage 3S battery designed for RC models that need sharp throttle response, strong punch, and a shorty-style battery footprint. It is especially useful for compact brushless RC cars, 1/12 buggies, rally vehicles, small off-road platforms, and lightweight sport aircraft that can safely run 3S LiHV power.
This battery is a strong fit when your model supports a 3S LiHV battery, uses an XT60 connector, and has enough space for a 77 × 33 × 27mm shorty pack. Because it is a LiHV battery, it can be charged up to 4.35V per cell only with a charger that supports LiHV mode. Always confirm your ESC, charger, battery tray, and model manual before use.
Product Specifications
| Capacity |
2400mAh |
| Voltage (S/cell) |
11.4V / 3S LiHV |
| Discharge Rate (Continuous/Burst) |
120C / 240C |
| Output Connector |
XT60 Plug |
| Dimensions (L × W × H) |
77 × 33 × 27mm |
| Weight |
Approx. 144g |
| Charge Rate |
5C Max |
| Balance Connector |
JST-XHP-4P |
| Wire Gauge |
12AWG |
| Stock Number |
HVS2401203XT60 |
Core Description
The CNHL Lightning LiHV 2400mAh 3S 120C shorty battery is designed for users who want a compact pack with a more energetic feel than a standard 3S LiPo. The 11.4V LiHV chemistry gives the battery extra voltage headroom when charged with the correct LiHV mode, while the 120C discharge rating helps support quick throttle response under load.
In small brushless RC cars, the advantage is easy to understand. A heavier battery can make a compact chassis feel dull, but a small low-capacity pack may run out too quickly. This 2400mAh 3S LiHV shorty sits in the middle: compact enough to keep the vehicle lively, but with enough capacity and discharge output for serious 3S driving.
The XT60 plug also makes this pack convenient for many modern compact RC setups. It avoids the weak feel of smaller connector systems and keeps the installation simple for models already wired around XT60.
Recommended 3S Shorty LiHV Battery for Maverick QByte XB Pro
The CNHL Lightning LiHV 2400mAh 11.4V 3S 120C HV Shorty LiPo Battery with XT60 Plug is a strong performance-focused battery option for the Maverick QByte XB Pro 1/12 brushless 4WD buggy. Its shorty layout keeps weight under control, while the 3S LiHV voltage and 120C output give the QByte XB Pro the sharp throttle response this small brushless buggy is built for.
For drivers who want a more aggressive setup than a standard 2200mAh 3S LiPo, this 2400mAh Lightning LiHV pack offers a useful balance of compact size, stronger punch, and XT60 plug convenience. It works especially well for off-road bashing, gravel runs, short grass, skate-park driving, and compact 3S buggy sessions where throttle response matters as much as runtime.
See more matched options in our Maverick QByte XB Pro Batteries collection.
Applications
This 3S LiHV shorty battery is a practical choice for compact RC vehicles that benefit from stronger voltage and lower battery weight. It is especially suitable for small brushless buggies, compact rally cars, touring-style platforms, and lightweight off-road vehicles that are designed for 3S power.
For aircraft use, the compact size and 144g weight make it useful in selected lightweight sport airplanes and night flyers that can use 3S LiHV power. The important checks are battery bay size, connector type, CG balance, and whether the ESC and charger setup are suitable for LiHV use.
- 1/12 brushless 4WD buggies
- Compact 3S RC cars
- Mini rally vehicles
- Small off-road RC vehicles
- Compact touring-style platforms
- Lightweight sport airplanes using 3S power
- Vehicles requiring a shorty LiPo battery layout
Compatible Model References
This battery is commonly used in compact 3S-compatible platforms where a shorty layout, XT60 connector, and strong discharge output make sense. One key application is the Traxxas Ford RS200 Mini Rally VXL, where a compact high-output 3S pack helps support quick acceleration without adding unnecessary battery bulk.
It can also be used in selected lightweight aircraft such as the HobbyKing Flybeam 2 Night Flyer, provided the battery bay, CG balance, ESC rating, and connector setup are suitable.
Because compact RC platforms vary widely, fitment should always be checked by comparing voltage, connector, tray size, weight, and wire clearance against the model’s manual or original battery recommendation.
What to Check Before Buying
-
Voltage: Your model must support 3S LiHV power.
-
Connector: This battery uses an XT60 plug.
-
Battery space: Confirm your tray or battery bay can fit 77 × 33 × 27mm.
-
Weight: At approximately 144g, this pack is lightweight, but balance still matters in small RC cars and aircraft.
-
Charger: Use LiHV mode only with a charger that supports 4.35V per cell charging.
-
ESC compatibility: Confirm your ESC and electronics can safely handle the selected voltage setup.
FAQ
What is this 2400mAh 3S LiHV shorty battery best used for?
It is best used in compact 3S RC cars, small brushless buggies, rally vehicles, lightweight off-road platforms, and selected sport aircraft that can support 3S LiHV power and XT60 wiring.
Can this battery work in the Maverick QByte XB Pro?
Yes. This 2400mAh 3S LiHV shorty pack is a strong performance option for the Maverick QByte XB Pro, especially for drivers who want sharper throttle response and a more aggressive 3S setup.
Why choose LiHV instead of standard LiPo?
LiHV batteries can be charged to a higher maximum cell voltage when using the correct charger mode. This can give the model a stronger feel early in the run, especially in compact performance vehicles.
Can I charge this battery with a normal LiPo charger?
Only if the charger has a dedicated LiHV mode. Do not charge this battery to 4.35V per cell unless your charger specifically supports LiHV charging.
Is XT60 the same as EC3 or IC3?
No. XT60, EC3, and IC3 are different connector formats. EC3 and IC3 are often discussed together in RC battery searches, but this specific battery comes with an XT60 plug. Use the correct connector or a properly rated adapter for your model.
Is this battery better than a 2200mAh 3S LiPo?
It depends on the setup. Compared with many 2200mAh 3S packs, this 2400mAh LiHV battery can offer slightly more capacity and a stronger high-voltage feel, while still keeping a compact shorty format.
Package Includes
1 × CNHL Lightning LiHV 2400mAh 11.4V 3S 120C HV Shorty LiPo Battery with XT60 Plug
Notice
- This is a LiHV battery. Use LiHV charging mode only with a charger designed to support LiHV batteries.
- When charging in LiHV mode, stop charging immediately if any cell exceeds 4.35V.
- If charging as a standard LiPo battery, do not exceed standard LiPo voltage limits.
- Check voltage, connector type, battery tray size, wire clearance, CG balance, and ESC rating before purchase.
- Inspect the battery surface, connector, wires, and cell voltage before first use.
- Do not use the battery if it becomes swollen, damaged, overheated, or physically deformed.
- For long-term storage, store the battery at proper storage voltage in a cool and dry place.
- If a new battery does not initially hold full performance, several normal balanced charge and discharge cycles may help stabilize the cells.
- Always follow standard LiPo and LiHV safety procedures during charging, storage, transport, and use.
