ארצות הברית וקנדה (למעט הוואי, פורטו ריקו, ואזורים איים או צבאיים של ארה"ב)
מדינות מחסני ארה"ב:
רק ארה"ב
מדינות מחסני האיחוד האירופי:
מדינות האיחוד האירופי (למעט מלטה/קפריסין)
מדינות מחסני גלובליות: האיחוד האירופי (למעט מלטה/קפריסין), ארה"ב, אוסטרליה, קנדה, בריטניה, שווייץ, ברזיל, צ'ילה, ערב הסעודית, יפן, מלזיה, סינגפור, דרום קוריאה, הפיליפינים, בלארוס, מקסיקו, ניו זילנד, נורווגיה, פרו.
The vertical stabilizer is one of those parts you don’t notice—until it’s even slightly off.
A small crack, twist, or loosened mounting area can show up as constant rudder trim, weird yaw on takeoff, or that “why won’t it track straight?” feeling in a crosswind.
This Vertical Stabilizer replacement is the clean way to get your CNHL Bison XT STOL 1750mm back to proper fin-and-rudder alignment.
Part type: Vertical stabilizer (fin) foam replacement
When You Need a Vertical Stabilizer Replacement
Tip-over on takeoff/landing that nicked the fin or stressed the tail
Cracks around the fin base or mounting area that keep spreading
Fin twist/warp that leads to constant rudder trim and drifting flight paths
Rudder feels “not centered” even after re-linking and servo re-center
Transport damage (fin is a common pressure point in the car)
What Vertical Fin Damage Feels Like in the Air
If your Bison suddenly needs more rudder correction than you remember—especially during rollout, low-speed turns, or in gusty conditions—the fin may be the hidden culprit.
A straight fin helps the airplane hold heading without fighting you, which matters a lot on STOL-style approaches where you’re slower and closer to the stall margin.
Install Notes (Practical)
Square it up: before final fastening, sight down the fuselage and confirm the fin is centered and vertical.
Rudder neutral: re-center the servo and re-check linkage so the rudder isn’t “pre-loaded” to one side.
First flight after repair: do a calm takeoff, climb out, then trim at a safe altitude before slowing down.
מוצרי CNHL מגיעים עם אחריות ל-90 יום מתאריך הרכישה, אלא אם צוין אחרת ברשימת המוצר.
אחריות זו מכסה פגמים מקוריים בחומרים ובעבודת הייצור. היא אינה מכסה בלאי רגיל, נפיחות, התנפחות, פריקה יתרה, טעינה יתרה, אחסון לא נכון, נזק מתאונה או מים, החלפת מחברים, או כל נזק הנובע משימוש לא נכון או טיפול לקוי.
אם תגלו שמוצר שנרכש מאיתנו פגום בתוך תקופת האחריות של 90 הימים, אנא צרו קשר כדי לתאם החזרה לבדיקה. בהתבסס על ההערכה שלנו, בדרך כלל נבצע תיקון, החלפה, או נציע פתרון מתאים ללא תשלום נוסף.
אנא שימו לב שהלקוחות אחראים לעלויות המשלוח בעת החזרת מוצרים לבדיקה או שירות במסגרת האחריות.
המדינה או האזור שלך צריכים להתאים למחסן המשלוחים
מחסן גלובלי
למחסן גלובלי (כולל Global-CN2), ההזמנות בדרך כלל נשלחות באמצעות משלוח סטנדרטי תוך 4 עד 5 ימי עבודה, וזמן המשלוח ייקח 20-25 ימים.
מחסן ארה"ב (LA)
למחסן ארה"ב (LA), ההזמנות בדרך כלל נשלחות תוך 2 עד 3 ימי עבודה. ההזמנות נשלחות לארצות הברית באמצעות שירות USPS או FedEx (משלוח חינם בהזמנה מעל $79), זמן המשלוח הוא 3-7 ימי עבודה. אנו גם שולחים לקנדה באמצעות UPS, המשלוח בדרך כלל לוקח 10-12 ימי עבודה, עלות המשלוח היא $169.
מחסן ארה"ב
למחסן ארה"ב, ההזמנות בדרך כלל נשלחות תוך 1 עד 2 ימי עבודה. ההזמנות נשלחות רק לארצות הברית באמצעות שירות USPS (משלוח חינם בהזמנה מעל $69), זמן המשלוח הוא 3-7 ימי עבודה.
מחסן האיחוד האירופי
למחסן האיחוד האירופי, ההזמנות בדרך כלל נשלחות תוך 1 עד 2 ימי עבודה, זמן המשלוח הוא 5-10 ימי עבודה.
מחסן בריטניה
למחסן בריטניה, ההזמנות בדרך כלל נשלחות תוך 1 עד 2 ימי עבודה. ההזמנות נשלחות רק להממלכה המאוחדת באמצעות שירות Yodel/Hermes/DPD (משלוח חינם בהזמנה מעל $69), זמן המשלוח הוא 3-7 ימי עבודה.
מחסן אוסטרליה
למחסן אוסטרליה, ההזמנות בדרך כלל נשלחות תוך 1 עד 2 ימי עבודה. ההזמנות נשלחות רק לאוסטרליה באמצעות שירות AU Post (משלוח חינם בהזמנה מעל $79). זמן המשלוח הוא 3-7 ימי עבודה.
מחסן קנדה
למחסן קנדה, ההזמנות בדרך כלל נשלחות תוך 1 עד 2 ימי עבודה. ההזמנות נשלחות רק לקנדה באמצעות שירות Amazon UPS/FedEx/CA Post (משלוח חינם בהזמנה מעל $99). זמן המשלוח הוא 3-7 ימי עבודה.
He’s on my low C5 T3.0 set up and they are massively great
CNHL Innovation RC Series 10000mAh 22.2V 6S 100C Lipo Battery with EC5 Plug
dfjets
Finally!
The Horten 229 is one of my biggest fascinations in aviation and this parkflyer-size RC version is a dream come true! Although made of EPO, the quality of the model is very good and it comes with landing gear, battery, and carrying case. It's also good for static display. I haven't flown it yet as I'm waiting for my LiHV charger but I plan on getting a second one just in case.
That model is a masterpiece! From the aerodynamics over the details, light weight construction and the flawless handling qualities and impressive performance, all for a very fair price and in a cool package!
Get yours!
Opening the box was so exciting! The plane is beautiful. Amazingly light weight, but durable.
I am so enthusiastic about this, I will demonstrating mine in my booth in the C building, #3113, at the Oshkosh Air Show the week of July 20, 2026.
I will also be taking orders for them to benefit my charity, Friends of British Aviation Heritage, which is raising money to not only to help attach the wings to the real Horten 229, but to help with restoration of another plane soon to go on display in England.
I ordered 3x 2000mha and 3x 4000mha lipo batteries and a pack of deans to traxxas plug adapters.
Usps was slow on their scans, and shipping as usual. Customer service was able to help sort out the shipping.
My items arrived before the estimated flight delivery date, which was a surprise considering 😆.
Everything works perfect out of the package, except for 1 battery, which I will be contacting customer service about.
Even with the one battery that was bad... I've thoroughly enjoyed the batteries. They proved great run time and power. They haven't got hot, and my son and I run our trucks pretty hard lol 😆.