Hobbywing RPM Sensor for Brushless Motor Speed Signal and V-Bar Governor Systems

Hobbywing RPM Sensor is a compact brushless motor speed signal sensor designed to detect voltage changes from brushless motor wires and output an RPM signal for compatible speed control, governor, and telemetry-related systems. It is commonly used in RC helicopter setups where a separate RPM signal is required for systems such as V-Bar-style governor applications.

This sensor works with different brushless motors and different PWM driving methods. Its lightweight 23 × 10 × 2mm body, 3.5–8.4V working voltage range, 2–14S motor wire voltage range, and 1000–300000rpm measuring range for 2-pole brushless motors make it a practical accessory for advanced ESC and helicopter power-system setup.

Use this RPM sensor only when your ESC, flybarless system, governor system, or receiver-side electronics require an external RPM signal input. Always confirm voltage supply, signal wiring, motor wire connection, and system compatibility before installation.

Quick Fit Check

• Function: Detects brushless motor wire voltage changes and outputs an RPM signal.
• Best for: Compatible governor systems, V-Bar-style RPM signal applications, and supported ESC / flight control setups.
• Motor type: Brushless motor.
• Working voltage: 3.5–8.4V.
• Motor wire voltage range: 2–14S LiPo.
• RPM range: 1000–300000rpm for 2-pole brushless motors.
• Size: 23 × 10 × 2mm.
• Weight: Approx. 6g including input and output wires.
• Important: Leads A and B connect to any two brushless motor wires and do not require polarity matching.

Product Specifications

What the RPM Sensor Does

The Hobbywing RPM Sensor reads voltage changes from the brushless motor wires and converts that information into an RPM signal. This makes it useful when a compatible governor system, flight controller, flybarless unit, or ESC-related system needs a separate motor speed signal.

One typical application is using the sensor as an RPM signal source for V-Bar-style systems in RC helicopters. The sensor does not control throttle by itself, and it does not replace the ESC. It only provides RPM signal output to a compatible system that can read and use that signal.

How to Wire the RPM Sensor

The sensor has two motor-side leads and one signal-side lead group. Leads A and B connect to any two wires of the brushless motor. Polarity does not matter for the A and B motor wire connection.

Lead C is the three-color signal wire with a connector at the end. The black wire is ground, the red wire connects to 3.3V or 5V to supply the sensor, and the white wire outputs the RPM signal.

For RC Helicopter Governor and V-Bar-Style Setups

In electric helicopter setups, RPM signal quality can be important for governor performance and head-speed monitoring. The Hobbywing RPM Sensor can be used as a compact signal source when the helicopter electronics require an external RPM input.

Because different helicopters, ESCs, motors, and flybarless systems use different wiring layouts, the RPM sensor should be treated as a setup accessory rather than a universal plug-and-play module. Confirm your system wiring before applying power.

Installation and Safety Notes

• Do not disassemble, modify, or repair the RPM sensor yourself.
• Do not allow water or moisture to enter the sensor.
• Keep wiring secure and away from rotating parts, gears, motor shafts, and high-heat areas.
• Confirm 3.3V or 5V sensor power before connecting the signal-side lead.
• Check motor wire routing carefully when working with 2–14S LiPo power systems.

Official Manual

Download the official manual here: Hobbywing RPM Sensor User Manual.

Recommended Collection Paths

• ESC Programmers & Accessories — browse Hobbywing setup tools, telemetry adapters, RPM sensors, programmers, and ESC accessories.
• Hobbywing Platinum ESCs — compare Platinum aircraft ESC options for helicopter and aircraft setups.
• Hobbywing ESCs — explore the full Hobbywing ESC lineup.
• CNHL Helicopter Batteries — battery options for electric helicopter power systems.

FAQ: Hobbywing RPM Sensor

What does the Hobbywing RPM Sensor do?

It detects voltage changes from brushless motor wires and outputs an RPM signal for compatible speed control, governor, or flybarless systems.

Is the RPM Sensor an ESC programmer?

No. It is not an ESC programmer or programming card. It is an RPM signal sensor used to provide motor speed information to compatible systems.

How do I connect the RPM Sensor to the motor?

Connect leads A and B to any two brushless motor wires. Polarity does not matter for these two motor-side leads.

What do the three signal wires do?

On lead C, the black wire is ground, the red wire connects to 3.3V or 5V to power the sensor, and the white wire outputs the RPM signal.

What voltage range does the RPM Sensor support?

The sensor working voltage is 3.5–8.4V, and the motor wire signal voltage range supports 2–14S LiPo systems.

Can I use it with V-Bar-style helicopter systems?

Yes, one typical application is using it as an RPM sensor for V-Bar-style systems, as long as your setup supports this kind of external RPM signal input.

CNHL製品は、商品リストに別途記載がない限り、購入日から30日間の返品が可能です。

この保証は、素材および製造上の元々の欠陥に限定されており、通常の摩耗や破損、水害、改造された商品、または不適切な使用に起因する損害は対象外です。購入された商品に30日以内に欠陥が見つかった場合は、検査のために商品を返品するためにお問い合わせください。通常、検査に基づき無償で修理または交換いたします。返品時の送料はお客様のご負担となります。

お客様の国または地域は、発送倉庫に対応している必要があります。

US倉庫

US倉庫の場合、注文は通常1〜2営業日以内に発送されます。注文はアメリカ合衆国へUSPSサービスでのみ発送されます（$69以上の注文で送料無料）。配送には3〜7営業日かかります。

EU倉庫

EU倉庫の場合、注文は通常1〜2営業日以内に発送され、配送には5〜10営業日かかります。

UK倉庫

UK倉庫の場合、注文は通常1〜2営業日以内に発送されます。注文はイギリスへYodel/Hermes/DPDサービスでのみ発送されます（$69以上の注文で送料無料）。配送には3〜7営業日かかります。

ハイランド＆諸島、チャネル諸島、北アイルランド、マン島、ワイト島など、一部地域には追加の送料がかかる場合があります。

AU倉庫

AU倉庫の場合、注文は通常1〜2営業日以内に発送されます。注文はオーストラリアへAU Postサービスでのみ発送されます（$79以上の注文で送料無料）。配送には3〜7営業日かかります。

CA倉庫

CA倉庫の場合、注文は通常1〜2営業日以内に発送されます。注文はカナダへAmazon UPS/FedEx/CA Postサービスでのみ発送されます（$99以上の注文で送料無料）。配送には3〜7営業日かかります。

グローバル倉庫

グローバル倉庫の場合、注文は通常4〜5営業日以内に標準配送で発送され、配送には15〜25日かかります。