The Hobbywing 10A HV UBEC 6V/7.4V/8.4V External Switching BEC for 3-14S LiPo is a high-voltage external DC voltage regulator designed to provide stable receiver and servo power for larger RC aircraft and other demanding RC setups. It draws power from a 3S to 14S LiPo battery and converts it into a safe, consistent output voltage for receivers, servos, gyros, and other onboard electronics.
This HV UBEC uses an efficient DC-DC regulator chip with a conversion efficiency of more than 90%. Compared with a traditional linear BEC, the switch-mode design helps reduce wasted heat and is better suited for high-voltage RC power systems, especially larger fixed-wing aircraft and servo-heavy builds.
With 6.0V, 7.4V, and 8.4V adjustable output, 10A continuous current, 25A instantaneous current, overcurrent protection, output short-circuit protection, and overheat protection, this Hobbywing 10A HV UBEC is a practical external BEC upgrade for large aircraft, OPTO ESC setups, and HV servo systems.
Product Specifications
| Product Name |
Hobbywing 10A HV UBEC External Switching BEC |
| Model |
UBEC-10A-HV(3-14S)-V1 |
| Product Number |
30608000 |
| BEC Type |
External switch-mode HV UBEC |
| Input Voltage |
3-14S LiPo |
| Output Voltage |
6.0V / 7.4V / 8.4V, 3 options adjustable |
| Output Current |
Continuous 10A, instantaneous 25A |
| Efficiency |
More than 90% |
| Protection Functions |
Overcurrent protection, output short-circuit protection, overheat protection |
| Recommended Use |
Large RC fixed-wing aircraft, HV receiver and servo power systems |
| Size |
55 × 25 × 12mm |
| Weight |
35g |
Key Features
-
10A HV external UBEC: Provides stable receiver and servo power for larger RC aircraft and other high-demand RC models.
-
3-14S LiPo input: Supports high-voltage aircraft power systems where a small internal BEC may not be suitable.
-
6.0V / 7.4V / 8.4V adjustable output: Three voltage options make it suitable for different receiver, servo, and HV servo setups.
-
25A instantaneous current: Helps handle short current spikes from servo movement and receiver-side load changes.
-
High-efficiency DC-DC regulator: More than 90% conversion efficiency helps reduce heat compared with traditional linear BEC designs.
-
Protection design: Includes overcurrent protection, output short-circuit protection, and overheat protection.
-
Metal shield structure: Helps with heat dissipation and reduces electromagnetic interference.
-
LED status indicator: The red LED indicates whether the UBEC is outputting normal voltage.
When Should You Use This Hobbywing 10A HV UBEC?
Use this Hobbywing 10A HV UBEC when your RC aircraft needs stronger and more stable receiver power than the ESC’s built-in BEC can provide. It is especially useful for larger fixed-wing aircraft, high-voltage 6S to 14S power systems, OPTO ESC setups, HV servo systems, or models with multiple high-load servos.
For large aircraft or servo-heavy setups, relying only on a small internal BEC may create heat or voltage stability issues. A dedicated external switching BEC helps separate receiver and servo power from motor control, giving the electronics a more reliable power path.
Output Voltage Notes
-
6.0V output: Suitable for receivers and servos that support 6V operation.
-
7.4V output: Suitable only for compatible HV receivers and HV servos.
-
8.4V output: Suitable only for compatible HV servo systems rated for 8.4V operation.
-
Important: When using 8.4V output, 4S LiPo or higher input is recommended for more stable output. With 3S LiPo, the UBEC may not maintain stable 8.4V output as battery voltage drops.
Installation Notes
- Connect the UBEC input wires in parallel with the main battery power supply.
- Plug the UBEC output lead into an idle receiver channel or receiver power input port.
- If your brushless ESC has no built-in BEC, no ESC-side BEC change is required.
- If your brushless ESC already has a built-in BEC, disconnect the ESC’s BEC output before using this external UBEC.
- Keep the UBEC more than 5cm away from the receiver to reduce possible electromagnetic interference.
- Always check your receiver and servo voltage ratings before selecting 6.0V, 7.4V, or 8.4V output.
User Manual
For wiring diagrams, voltage adjustment instructions, safety notes, and setup guidance, please refer to the official Hobbywing 10A HV UBEC user manual.
Recommended Applications
- Large RC fixed-wing aircraft using 3S to 14S LiPo power systems
- Aircraft with multiple servos or higher receiver-side power demand
- OPTO ESC systems that require a separate BEC
- HV servo setups that support 7.4V or 8.4V receiver power
- Custom RC aircraft builds where stable external HV BEC power is required
For more ESC and power-system options, explore our Hobbywing ESCs, ESC Programmers & Accessories, and External BEC & UBEC collections.
FAQ
What is the Hobbywing 10A HV UBEC used for?
It is used to provide stable power to the receiver, servos, gyro, and other onboard electronics. It is useful when the ESC has no built-in BEC, when the internal BEC is not strong enough, or when a separate high-current receiver-power solution is preferred.
Can this UBEC be used with a 14S LiPo battery?
Yes. This Hobbywing 10A HV UBEC supports 3-14S LiPo input, making it suitable for many larger RC aircraft power systems.
Should I use 6V, 7.4V, or 8.4V output?
Use 6V for electronics that support 6V operation, 7.4V for compatible HV receivers and HV servos, and 8.4V only for HV servo systems rated for 8.4V operation. Always check your electronics specifications before changing the output voltage.
Can I use 8.4V output with a 3S LiPo battery?
It is not recommended if you need stable 8.4V output. As the 3S LiPo voltage drops during use, the UBEC may not be able to maintain a stable 8.4V output. For 8.4V output, 4S LiPo or higher input is recommended.
Do I need to disable the ESC’s built-in BEC?
Yes, if your ESC already has a built-in BEC and you want this external UBEC to power the receiver, the ESC’s BEC output should be disconnected first. This avoids powering the receiver from two BEC outputs at the same time.
Is this product an ESC?
No. This product is not an ESC and does not control the motor. It is an external switching HV BEC used to power the receiver, servos, gyro, and other low-voltage electronics.
Ihr Land oder Ihre Region muss mit dem Versandlager übereinstimmen
US Lager
Für das US Warehouse werden Bestellungen normalerweise innerhalb von 1 bis 2 Werktagen versendet. Bestellungen werden nur in die Vereinigten Staaten über USPS Service versandt (kostenloser Versand bei Bestellungen über 69 $), die Versandzeit beträgt 3-7 Werktage.
EU Lager
Für das EU Warehouse werden Bestellungen normalerweise innerhalb von 1 bis 2 Werktagen versendet, die Versandzeit beträgt 5-10 Werktage.
UK Lager
Für das UK Warehouse werden Bestellungen normalerweise innerhalb von 1 bis 2 Werktagen versendet. Bestellungen werden nur in das Vereinigte Königreich über Yodel/Hermes/DPD Service versandt (kostenloser Versand bei Bestellungen über 69 $), die Versandzeit beträgt 3-7 Werktage.
Für bestimmte Gebiete können zusätzliche Versandkosten anfallen, einschließlich Highlands & Islands, Kanalinseln, Nordirland, Isle of Man und Isle of Wight.
AU Lager
Für das AU Warehouse werden Bestellungen normalerweise innerhalb von 1 bis 2 Werktagen versendet. Bestellungen werden nur nach Australien über den AU Post Service versandt (kostenloser Versand bei Bestellungen über 79 $). Die Versandzeit beträgt 3-7 Werktage.
CA Lager
Für das CA Warehouse werden Bestellungen normalerweise innerhalb von 1 bis 2 Werktagen versendet. Bestellungen werden nur nach Kanada über Amazon UPS/FedEx/CA Post Service versandt (kostenloser Versand bei Bestellungen über 99 $). Die Versandzeit beträgt 3-7 Werktage.
Globales Lager
Für das Global Warehouse werden Bestellungen in der Regel innerhalb von 4 bis 5 Werktagen per Standardversand versendet, und die Versandzeit beträgt 15-25 Tage.
