CNHL Racing Series 6000mAh 15.2V 4S 130C LiHV Shorty Hardcase LiPo Battery with 1 Pair of 5mm Heatsink Bullet Plug Grips

Quick Fit Check

The CNHL Racing Series 6000mAh 15.2V 4S2P 130C LiHV Shorty Hardcase LiPo Battery with 5mm Bullet Sockets is a true 4S shorty LiPo battery designed for shorty-compatible RC racing chassis that need high capacity, strong current delivery and a compact battery footprint.

Its 97mm length is substantially shorter than a conventional full-length 4S hardcase pack, while the 6000mAh capacity and 91.20Wh energy rating provide the runtime expected from a serious 1/8-scale racing battery.

Before ordering, confirm the complete battery dimensions, chassis hold-down system, 5mm bullet connection layout, polarity and whether the ESC supports the selected LiHV charge voltage.

Product Specifications

Dimensions and weight are based on the production sample shown. Small manufacturing and measurement tolerances may apply.

6000mAh 4S LiHV Power in a True Shorty Hardcase

The CNHL Racing Series battery combines 6000mAh capacity, 15.2V LiHV chemistry and a 97mm shorty footprint in one race-focused hardcase pack.

Unlike a conventional full-length 4S hardcase battery, this 4S LiPo shorty pack occupies less chassis length. The shorter footprint can leave more room for ESC placement, receiver installation, wiring and front-to-rear battery-position adjustment.

The 4S2P construction provides 91.20Wh of energy while maintaining the compact shorty layout. It is intended for drivers who want the runtime of a 6000mAh battery without returning to a long brick-style 4S case.

Why Choose This 4S Shorty LiPo Battery?

• True 97mm shorty format: Uses substantially less tray length than a traditional full-length 4S hardcase pack.
• 6000mAh capacity: Provides useful energy reserve for practice, longer mains and repeated high-load acceleration.
• 4S2P LiHV construction: Combines high-voltage chemistry with the capacity and current capability required by serious RC racing systems.
• 130C continuous output: Designed for demanding buggy, truggy and performance chassis applications.
• Hardcase protection: Provides a rigid outer structure suitable for vehicle battery trays and race-oriented retention systems.
• 5mm bullet socket layout: Supports a clean, direct racing-style connection without permanently attached output wires.

Shorty vs. Full-Length 4S Hardcase Battery

The most important difference between a 4S shorty battery and a full-length 4S pack is the space each one occupies inside the chassis.

The CNHL shorty pack maintains a width and height similar to many conventional 4S hardcase batteries while reducing the case length to just 97mm. This shorter footprint leaves more usable chassis space and provides greater freedom for fore-and-aft battery positioning in compatible shorty trays. Always confirm the complete 97 × 47.5 × 47.5mm dimensions and battery hold-down design before installation.

130C Performance for 1/8 RC Racing

The 130C continuous and 260C burst ratings are designed for high-current applications where acceleration, voltage support and repeatable power delivery matter.

This makes the battery relevant to 1/8 electric buggy and truggy platforms that are specifically designed or converted for a 4S shorty hardcase pack. The 6000mAh capacity also gives drivers more energy reserve for practice sessions and longer race formats than many lower-capacity shorty batteries.

Actual performance depends on the ESC, motor, gearing, tire load, track grip, drivetrain efficiency and operating temperature. Check battery and connector temperatures after the first runs whenever gearing or power settings are changed.

5mm Bullet Sockets and Included Plug Grips

The battery uses 5mm bullet sockets mounted directly in the hardcase. The ESC power leads connect to the battery using matching 5mm bullet plugs rather than an attached XT60, EC5 or other wired battery connector.

This connection style allows the user to control ESC lead length and routing while keeping the battery installation compact. It also reduces unnecessary battery-side wiring inside a race chassis.

The package includes one pair of CNHL 5mm heatsink bullet plug grips: one red positive grip and one black negative grip. The color-coded grips make polarity easier to identify and provide a secure surface for inserting and removing the bullet plugs without pulling directly on the power wires.

Additional replacement sets are available through the CNHL 5mm heatsink bullet plug grip set.

Important: confirm positive and negative polarity before connecting the battery. Reversing the 5mm bullet plugs can immediately damage the ESC and battery.

Compatible RC Models and Applications

1/8 Electric Buggy

This 4S shorty LiPo battery is designed for 1/8 electric buggy chassis that accept a 97mm shorty hardcase pack and use 5mm bullet battery connections. The short case can provide more freedom to adjust chassis balance or position nearby electronics.

1/8 Electric Truggy

The combination of 6000mAh capacity and 130C output can support demanding electric truggy applications where the chassis has sufficient height, width and battery-retention clearance for this pack.

Shorty-Compatible Racing Chassis

The battery is suitable for custom, conversion and factory racing chassis built around the 4S LiPo shorty format. Check the battery clamp, side guards and ESC-wire direction before installation.

Club Racing and Practice

The 6000mAh capacity makes the pack useful for drivers who want more running time and energy reserve than smaller shorty batteries while retaining a compact racing layout.

LiHV Charging and Voltage

This battery can be charged to a maximum of 4.35V per cell using a charger with a dedicated LiHV balance-charging mode. A fully charged 4S LiHV battery reaches 17.4V.

Confirm that the ESC supports the intended maximum voltage before charging fully in LiHV mode. Some systems described only as “4S compatible” may be rated around the 16.8V maximum of a standard 4S LiPo battery.

The battery may also be charged to a lower maximum voltage when full LiHV voltage is not required, but the charger must still be configured correctly and the expected performance will differ.

More Battery and Connector Options

Browse more 15.2V 4S LiHV batteries for different capacities, case formats and connector systems or explore more 4S Shorty LiPo Batterie for RC racing

For additional vehicle-focused batteries, explore the complete CNHL RC car battery collection.

Additional red and black connector grips are available in the CNHL two-pair 5mm heatsink bullet plug grip set.

FAQ

What is a 4S shorty LiPo battery?

A 4S shorty LiPo battery provides 4S voltage in a shorter hardcase layout than a conventional full-length 4S pack. The shorter case can provide more freedom for battery positioning, wiring and chassis layout.

What does 4S2P mean?

4S2P means the battery uses four cell groups connected in series, with two parallel cells within each group. This produces 15.2V nominal voltage and a total capacity of 6000mAh.

Does this battery have a wired XT60 or EC5 connector?

No. The battery has 5mm bullet sockets built into the hardcase. The ESC leads must use matching 5mm bullet plugs.

Are the 5mm bullet plug grips included?

Yes. The package includes one red and one black 5mm heatsink bullet plug grip with the matching connector pieces required for one positive and negative battery connection pair.

Can this battery fit any 1/8 RC buggy?

No. The buggy must accept the 97 × 47.5 × 47.5mm shorty hardcase dimensions, approximately 415.5g weight and 5mm bullet socket layout. Check the tray and retention system before ordering.

Is this a standard LiPo or LiHV battery?

This is a LiHV battery. It has a nominal voltage of 15.2V and can be charged to a maximum of 17.4V using the correct LiHV balance-charging mode.

Should this battery always be charged at 5C?

No. The 5C specification is the maximum charge rate, not the required everyday rate. A lower balanced charge rate generally creates less heat and places less stress on the cells.

Package Includes

• 1 × CNHL Racing Series 6000mAh 15.2V 4S2P 130C LiHV Shorty Hardcase LiPo Battery
• 1 × 4S balance adapter lead
• 1 × Red 5mm heatsink bullet plug grip with matching connector
• 1 × Black 5mm heatsink bullet plug grip with matching connector

Notice

• This is a 4S LiHV battery with a maximum charge voltage of 4.35V per cell.
• Use a compatible LiHV balance charger and select the correct four-cell setting.
• Confirm that the ESC supports the selected maximum battery voltage before charging fully in LiHV mode.
• Check the 97 × 47.5 × 47.5mm dimensions, approximately 415.5g weight and chassis hold-down clearance before use.
• Confirm the positive and negative socket orientation before inserting the 5mm bullet plugs.
• Secure the hardcase battery firmly so it cannot move during acceleration, braking, jumping or impact.
• Never charge unattended, and do not use a swollen, cracked, damaged or overheated battery.
• Allow the battery to cool before recharging and use a suitable storage program when it will not be used for an extended period.

CNHL LiPoバッテリーは、製品リストに別途記載がない限り、購入日から90日間の保証が付いています。

この保証は、材料および製造上の元の欠陥をカバーします。通常の摩耗や劣化、膨張、膨れ、過放電、過充電、不適切な保管、クラッシュや水害、コネクタの変更、または誤使用や取り扱い不良による損傷は対象外です。

購入されたバッテリーが90日間の保証期間内に不良であることが判明した場合は、検査のための返品手配をするために、お問い合わせください。評価に基づき、通常は修理、交換、または追加料金なしで適切な解決策を提供します。

お客様の国または地域は、発送倉庫に対応している必要があります。

US倉庫

米国倉庫からのご注文は通常1～2営業日以内に発送されます。ご注文はアメリカ合衆国へのみUSPSサービス（79ドル以上のご注文で送料無料）で発送され、配送には3～7営業日かかります。

EU倉庫

EU倉庫の場合、注文は通常1〜2営業日以内に発送され、配送には5〜10営業日かかります。

UK倉庫

UK倉庫の場合、注文は通常1〜2営業日以内に発送されます。注文はイギリスへYodel/Hermes/DPDサービスでのみ発送されます（$69以上の注文で送料無料）。配送には3〜7営業日かかります。

ハイランド＆諸島、チャネル諸島、北アイルランド、マン島、ワイト島など、一部地域には追加の送料がかかる場合があります。

AU倉庫

AU倉庫の場合、注文は通常1〜2営業日以内に発送されます。注文はオーストラリアへAU Postサービスでのみ発送されます（$79以上の注文で送料無料）。配送には3〜7営業日かかります。

CA倉庫

CA倉庫の場合、注文は通常1〜2営業日以内に発送されます。注文はカナダへAmazon UPS/FedEx/CA Postサービスでのみ発送されます（$99以上の注文で送料無料）。配送には3〜7営業日かかります。

グローバル倉庫

グローバル倉庫の場合、注文は通常4〜5営業日以内に標準配送で発送され、配送には15〜25日かかります。