The CNHL 2 Pairs 5mm Heatsink Bullet Plug Grips with Bullet Connectors are designed for RC racers who need a clean, secure and easy-to-handle connection between ESC power leads and 2S hardcase LiPo batteries with 5.0mm socket-style terminals.
This set includes 2 red and 2 black heatsink-style bullet plug grips, giving you two complete red/black connector pairs for hardcase battery wiring. The included 5mm bullet connectors insert directly into compatible hardcase LiPo battery sockets, while the red and black grip sleeves make battery installation, removal and polarity identification much easier during setup or race-day battery changes.
Although this style of product is often called a heatsink bullet plug grip, its most practical real-world value is grip, control and wire protection. Instead of pulling directly on silicone ESC wires, the larger grip sleeve gives your fingers a solid contact point, helping reduce stress on solder joints, wire insulation and battery lead connections over time.
What This Product Is
This is a 5mm bullet plug grip and connector set for direct hardcase LiPo battery connections. It is used when your 2S hardcase battery has built-in 5.0mm socket-style terminals and your ESC power leads need to connect directly to those battery sockets through bullet connectors.
What This Product Is Not
This product is not a standard plug-to-plug adapter like XT60 to XT90, EC5 to TRX or TRX to XT60. It does not convert one molded RC plug format into another. Instead, it is made for direct bullet-style hardcase battery wiring where the ESC leads are soldered to 5mm bullet connectors and inserted directly into the battery’s 5.0mm terminals.
Key Features
- 2 pairs total: 2 red and 2 black 5mm heatsink bullet plug grips
- Designed for 2S hardcase LiPo batteries with 5.0mm socket-style terminals
- Includes matching 5mm bullet connectors and set screws for installation
- Red and black grip sleeves help identify positive and negative polarity
- Improves handling when inserting or removing bullet connectors
- Helps reduce pulling stress on silicone ESC battery wires
- Clean low-profile setup for tight RC racing chassis layouts
- Ideal for direct ESC lead connection to hardcase battery sockets
Product Specifications
| Product Type |
5mm heatsink bullet plug grip and connector set |
| Connector Size |
5.0mm bullet connector |
| Recommended Battery Type |
2S hardcase LiPo battery with 5.0mm socket-style terminals |
| Grip Colors |
Red / Black |
| Included Quantity |
2 pairs total: 2 red grips, 2 black grips, 4 matching 5mm bullet connectors and 4 set screws |
| Typical Use |
ESC power lead connection to hardcase LiPo battery sockets |
| Application |
1/10 RC racing cars, touring cars, buggies, sprint cars, drag cars and modified RC builds |
| Connection Style |
Direct 5mm bullet connection to hardcase battery terminals |
| Stock Number |
ADP50MM2S |
Typical Applications
- 2S hardcase LiPo battery wiring
- 1/10 RC racing cars
- Touring cars, buggies and sprint cars
- Drag cars and modified RC builds
- Off-road trucks using direct bullet-style hardcase battery connections
- ESC battery leads that require direct 5mm bullet connection to hardcase packs
How It Works
Solder your ESC power leads to the included 5mm bullet connectors. Then slide the red and black plug grips over the bullet connectors and secure them with the set screws. Once installed, the bullet connectors can be inserted directly into compatible 5.0mm hardcase LiPo battery sockets.
The grip sleeves make it easier to install and remove battery leads without pulling directly on the wire. This is especially useful in compact RC racing chassis where battery trays are tight and bullet connectors can be difficult to grab by hand.
Compatibility & Fit Check
- Best suited for 2S hardcase LiPo batteries with 5.0mm socket-style terminals.
- Not intended for standard soft-pack LiPo batteries with pre-installed XT60, XT90, EC5 or TRX plugs.
- For best fitment, use the included matching 5mm bullet connectors.
- If using third-party bullet plugs, confirm the bullet head shape before installation. Some taller or unusual bullet head designs may not seat correctly inside the grip sleeve.
- Always check polarity before connecting the ESC to the battery.
Package Included
- 2 × Red 5mm heatsink bullet plug grips
- 2 × Black 5mm heatsink bullet plug grips
- 4 × Matching 5mm bullet connectors
- 4 × Set screws
Important Polarity Note
Always confirm battery polarity before connecting. Red should be used for positive and black for negative. Make sure both 5mm bullet plugs are fully seated in the battery sockets before powering on your ESC. Incorrect polarity can damage your ESC, battery or electronic system.
FAQ
Is this a regular XT60, XT90, EC5 or TRX adapter?
No. This is not a molded plug-to-plug adapter. It is a 5mm bullet plug grip and connector set for direct connection between ESC leads and 2S hardcase LiPo battery sockets.
Does this product increase voltage or capacity?
No. These bullet plug grips do not change voltage, capacity or battery performance. They are connection hardware designed to improve handling, polarity identification and hardcase battery wiring cleanliness.
Will these fit all 5mm bullet connectors?
They are designed around the included 5mm bullet connectors. Some third-party 5mm bullets may have taller or different head shapes, so fitment should be checked before final installation.
Why use red and black plug grips?
The red and black colors make it easier to identify positive and negative leads, especially in racing setups where wires may be routed tightly or changed quickly between runs.
If you are looking for standard plug conversion options such as XT60, XT90, EC5, TRX or parallel battery connectors, browse the full selection here: RC Battery Plug Adapters Collection.
CNHL-produkter leveres med 30 dagers returrett fra kjøpsdatoen med mindre annet er angitt i produktlisten.
Denne garantien er begrenset til opprinnelige material- og produksjonsfeil, og dekker ikke normal slitasje, krasj- eller vannskader, produkter som har blitt modifisert, eller skader som oppstår som følge av feil bruk. Hvis du oppdager at et produkt du har kjøpt fra oss er defekt innenfor denne 30-dagersperioden, vennligst kontakt oss for å returnere varen for inspeksjon. Vi vil vanligvis reparere eller erstatte varen uten kostnad basert på vår inspeksjon. Kunder er ansvarlige for fraktkostnadene når de returnerer produktene.
Ditt land eller område må samsvare med fraktlageret
US-lager
For US Warehouse sendes bestillinger vanligvis ut innen 1 til 2 virkedager. Bestillinger sendes kun til United Status via USPS-tjeneste (Gratis frakt på bestillinger over $69), fraktiden tar 3-7 virkedager.
EU-lager
For EU Warehouse sendes bestillinger vanligvis ut innen 1 til 2 virkedager, fraktiden tar 5-10 virkedager.
UK-lager
For UK Warehouse sendes bestillinger vanligvis ut innen 1 til 2 virkedager. Bestillinger sendes kun til United Kingdom via Yodel/Hermes/DPD-tjeneste (Gratis frakt på bestillinger over $69), fraktiden tar 3-7 virkedager.
Ekstra fraktkostnader kan påløpe for visse områder, inkludert Highlands & Islands, Channel Islands, Nord-Irland, Isle of Man og Isle of Wight.
AU-lager
For AU Warehouse sendes bestillinger vanligvis ut innen 1 til 2 virkedager. Bestillinger sendes kun til Australia via AU Post-tjeneste (Gratis frakt på bestillinger over $79). Fraktiden tar 3-7 virkedager.
CA-lager
For CA Warehouse sendes bestillinger vanligvis ut innen 1 til 2 virkedager. Bestillinger sendes kun til Canada via Amazon UPS/FedEx/CA Post-tjeneste (Gratis frakt på bestillinger over $99). Fraktiden tar 3-7 virkedager.
Globalt lager
For Global Warehouse sendes bestillinger vanligvis ut via standard frakt innen 4 til 5 virkedager, og fraktiden tar 15-25 dager.
