Quick Fit Check
The CNHL Black Series 2200mAh 11.1V 3S Shorty LiPo Battery 40C with XT60 Plug is a compact 3S battery for RC models that need useful 2200mAh capacity without the length and weight of a conventional full-size 3S pack.
At approximately 145g and only 77mm long, this battery is especially useful in compact crawlers, trail trucks, gliders, park flyers and other weight-sensitive RC platforms where battery position and center of gravity matter as much as capacity.
Before ordering, confirm the model supports standard 3S LiPo voltage, accepts the 77 × 33 × 26mm dimensions, can securely hold the approximately 145g pack and uses an XT60 connector or a correctly rated adapter.
| Check Item |
Your Model Should Match |
This Battery |
| Cell Count |
Standard 3S LiPo system |
11.1V nominal / 3S1P |
| Maximum Voltage |
Electronics support a fully charged 3S LiPo |
12.6V fully charged |
| Battery Space |
Tray or battery pod accepts a compact shorty pack |
77 × 33 × 26mm |
| Installed Weight |
Model balances correctly with this battery mass |
Approx. 145g |
| Connector |
XT60-compatible power lead |
XT60 Plug |
| Power Demand |
Battery output matches the motor and ESC load |
40C continuous / 80C burst |
Product Specifications
| Capacity |
2200mAh |
| Nominal Voltage |
11.1V |
| Cell Configuration |
3S |
| Fully Charged Voltage |
12.6V / 4.20V per Cell |
| Discharge Rate |
40C Continuous / 80C Burst |
| Maximum Charge Rate |
5C |
| Output Connector |
XT60 Plug |
| Balance Connector |
JST-XH 4-Pin |
| Dimensions (L × W × H) |
77 × 33 × 26mm |
| Approx. Weight |
145g |
| Wire Gauge |
12AWG |
| Stock Number |
S220403BK |
Battery dimensions may vary by approximately 1–5mm, and weight tolerance is approximately ±5g.
2200mAh Capacity in a Compact 3S Shorty Format
The CNHL Black Series 2200mAh 3S Shorty LiPo is designed around a simple idea: provide the useful runtime of a 2200mAh battery without forcing a compact RC model to carry a long, bulky pack.
Its 77mm case length gives builders more freedom in tight battery compartments and can make battery placement easier in crawlers, gliders and other models where center of gravity is sensitive to battery position.
The approximately 145g weight also keeps the pack considerably lighter than many larger-capacity 3S batteries. This makes it attractive when overall handling and balance matter more than maximizing runtime.
Why Choose This Battery?
-
Short 77mm footprint: Fits compact battery trays and narrow electronics bays more easily than many full-length 3S packs.
-
2200mAh capacity: Provides more runtime than smaller 1300–1500mAh batteries while remaining compact.
-
Approx. 145g weight: Useful for weight-sensitive crawlers, gliders and small aircraft.
-
40C continuous output: Suitable for many moderate-current 3S RC systems.
-
XT60 connector: Common on FPV, crawler, park-flyer and general RC power systems.
-
Standard 3S LiPo voltage: Charges to 12.6V and does not require LiHV charging mode.
2200mAh 3S Shorty Battery for the HobbyKing Hall Cherokee V2 1700mm
The CNHL Black Series 2200mAh 11.1V 3S Shorty LiPo is closely aligned with the battery format used by the HobbyKing Hall Cherokee V2 1700mm powered glider. The aircraft uses a 2200mAh 3S shorty-style setup, making this pack a natural option for pilots looking for the intended balance between powered climb time and power-off soaring.
The short 77mm battery body is particularly useful in the Cherokee V2 because usable space in the electronics bay is limited and battery position plays an important role in reaching the aircraft's recommended center of gravity.
Compared with the lighter 1500mAh alternative, this 2200mAh pack provides more energy for repeated powered climbs while still keeping the battery considerably more compact than many conventional full-length 2200mAh packs.
After installation, confirm the aircraft balances within the recommended 60–65mm CG range and make sure the battery, receiver and surrounding wiring cannot move in flight.
Compare lighter and higher-capacity alternatives in the Best Batteries for the HobbyKing Hall Cherokee V2 collection.
Compact 3S Battery for Vanquish VS4-10 Phoenix Portal RTR
The compact dimensions of this 2200mAh 3S pack also make it well suited to the Vanquish Products VS4-10 Phoenix Portal RTR.
For technical crawling and trail driving, a smaller battery can provide useful 3S wheel speed without carrying the mass of a large 4000–6000mAh pack. The shorty footprint also gives more freedom to work with compact battery mounting positions.
The 2200mAh capacity is therefore better suited to drivers who prioritize chassis balance, climbing behavior and technical control over maximum trail duration.
Vanquish Products H10 Optic Brushless RTR Battery
The CNHL Black Series 2200mAh 3S Shorty is also a compact battery option for the Vanquish Products H10 Optic Brushless RTR.
Its short battery body works well with compact crawler battery layouts, while 3S voltage gives the vehicle stronger wheel speed than a comparable 2S setup. At approximately 145g, the pack keeps battery mass under control for rocks, steep climbs and technical trail sections where weight placement can affect vehicle behavior.
For more compact 2S and 3S options, explore the Vanquish Products H10 Optic Batteries collection.
Hobbywing QuicRun Fusion SE Crawler Setups
This battery is a practical match for compatible crawler builds using a Hobbywing QuicRun Fusion SE 2-in-1 brushless system and a 3S power configuration.
The shorty layout is useful in vehicles such as Axial SCX10, Element Enduro and similar trail platforms where space around the transmission, electronics and front-mounted battery area can be limited.
For technical crawling, the main benefit of a 2200mAh pack is not simply smaller size. Lower battery mass can also make it easier to tune front-to-rear and side-to-side weight distribution without carrying unnecessary capacity high in the chassis.
Other Compatible RC Applications
RC Crawlers and Trail Trucks
This battery can suit compact 3S crawler platforms where the 77 × 33 × 26mm dimensions and XT60 connection match the installation. It is especially useful when battery placement is part of chassis tuning.
Gliders and Park Flyers
The 145g battery weight and compact dimensions make the pack useful for compatible gliders, park flyers and sport aircraft that need 3S 2200mAh power but cannot comfortably carry a conventional long battery.
Small 3D RC Airplanes
For compatible small aerobatic aircraft, the shorty format can provide more freedom to position the battery around the required CG while maintaining useful 2200mAh capacity.
Compact RC Helicopters
The pack may also suit selected 3S helicopters where its dimensions, weight, discharge requirement and XT60 connection match the airframe.
2200mAh Shorty vs. Smaller 1500mAh 3S Battery
| Priority |
2200mAh Shorty |
1500mAh 3S |
| Energy Reserve |
Higher |
Lower |
| Installed Weight |
Approx. 145g |
Usually lighter |
| Powered Runtime |
Longer |
Shorter |
| Best Use |
Balanced runtime and compact fitment |
Minimum weight and lighter handling |
The 2200mAh battery is the more natural choice when useful runtime is important but battery length must remain short. The smaller 1500mAh class makes more sense when reducing installed weight is the highest priority.
XT60 Connector Compatibility
This battery includes an XT60 output plug and connects directly to a corresponding XT60 device-side connector when polarity and orientation are correct.
Models using EC3, IC3, EC5, IC5, XT30, T/Dean, TRX or another connector require a correctly rated adapter or professional connector conversion.
EC3 and IC3 are physically compatible with each other, while EC5 and IC5 are physically compatible with each other. Neither connector family plugs directly into XT60.
FAQ
Is this a standard LiPo or LiHV battery?
This is a standard 3S LiPo battery. Its nominal voltage is 11.1V, and its maximum balanced charge voltage is 12.6V, or 4.20V per cell.
What does “shorty” mean on this battery?
Shorty refers to the compact 77mm battery length. It provides 2200mAh capacity in a much shorter body than many conventional full-length 3S batteries, which can make installation and CG adjustment easier.
Is this battery a good fit for the HobbyKing Hall Cherokee V2?
Yes. Its 3S 2200mAh specification and short battery format closely match the Cherokee V2's intended battery setup. Confirm the final 60–65mm CG position after installation.
Can it be used with the Vanquish H10 Optic?
Yes. The compact 3S shorty format is well suited to the H10 Optic battery layout, particularly for drivers who prioritize technical crawling and lower battery mass over maximum runtime.
Can it be used with a Hobbywing QuicRun Fusion SE?
Yes, when the vehicle and complete Fusion SE setup support 3S LiPo operation and the battery can be mounted securely.
Is 40C enough for an RC crawler?
For many crawler and trail applications, 40C provides more than enough current capability because crawling generally places less sustained current demand on the battery than high-speed bashing or large EDF aircraft. The complete motor, ESC and gearing setup should still be considered.
Can it connect directly to EC3 or IC3?
No. This battery uses XT60. A correctly rated XT60-to-EC3 adapter can be used when suitable; EC3 and IC3 are physically compatible with each other at the main power connection.
Should this battery always be charged at 5C?
No. The 5C specification is the maximum charge rate, not the required everyday rate. A lower balanced charge rate generally produces less heat and places less stress on the battery.
Notice
- This is a standard 3S LiPo battery with a maximum charge voltage of 4.20V per cell.
- Use a compatible LiPo balance charger and select the correct three-cell setting.
- Confirm the 77 × 33 × 26mm dimensions, approximately 145g weight and XT60 connector before use.
- Check the specified center of gravity whenever this battery is installed in an aircraft.
- Secure the battery firmly and keep the output and balance wires clear of gears, driveshafts, wheels, propellers and sharp chassis edges.
- Never charge unattended, and do not use a swollen, punctured, damaged or overheated battery.
- Allow the battery to cool before recharging and use storage mode when it will not be used for an extended period.
- Inspect the battery surface, wires, connector and cell voltages after a crash or hard impact.
