CNHL G+Plus 2200mAh 22.2V 6S 70C Lipo Battery with XT60 Plug

Quick Fit Check

The CNHL G+Plus 2200mAh 22.2V 6S 70C LiPo Battery with XT60 Plug is a compact 6S battery for FPV drones, EDF jets, helicopters and lightweight performance aircraft that need 6S voltage without the additional mass of a 3000–5000mAh pack.

At approximately 109 × 35 × 51mm (L × W × H) and 349g, this pack is particularly relevant to 5–7 inch FPV builds, long-range platforms and smaller 6S aircraft where battery weight directly affects handling and endurance.

Product Specifications

Battery dimensions may vary by approximately 1–5mm, and weight tolerance is approximately ±5g.

Lightweight 2200mAh 6S Power for FPV and RC Aircraft

The CNHL G+Plus 2200mAh 6S 70C is aimed at models that benefit from 6S voltage but remain sensitive to battery weight. At approximately 349g, it carries substantially less mass than many 3000–5000mAh 6S packs.

The 2200mAh capacity makes it particularly relevant to long-range FPV, cinematic builds, smaller EDF jets and lightweight fixed-wing aircraft where adding capacity can quickly change handling or takeoff weight.

Why Choose This Battery?

• 2200mAh capacity: Useful balance of stored energy and lower installed mass.
• Approx. 349g: Attractive for weight-sensitive FPV and aircraft setups.
• 109mm length: Compact body for smaller 6S battery bays and frames.
• 70C continuous rating: Designed for responsive brushless 6S power systems.
• XT60 connector: Commonly used by FPV drones and compact RC aircraft.
• Standard LiPo chemistry: Charges to 25.2V and does not require LiHV mode.

2200mAh 6S Battery for GEPRC TriPro6 O4 Pro

The CNHL G+Plus 2200mAh 6S 70C XT60 is a strong battery option for the GEPRC TriPro6 O4 Pro 6-inch long-range FPV drone. The 2200mAh capacity provides a useful balance between cruising endurance and responsive handling without moving into a much heavier high-capacity pack.

Confirm battery mounting, wire clearance and final takeoff weight for your build. Compare more selected options in the GEPRC TriPro6 Battery Collection.

6S Battery for GEPRC Vapor D5 O4 Pro

The 2200mAh format is also relevant to compatible GEPRC Vapor D5 O4 Pro setups where additional energy reserve is preferred over minimum takeoff weight. Its XT60 connector and 70C rating suit the general 6S FPV power direction of this type of build.

Compare more capacities in the GEPRC Vapor D5 O4 Pro Battery Collection.

6S Long-Range and Freestyle FPV Applications

This battery is also relevant to compatible Chimera7 Pro, 7-inch long-range quads and larger 6S freestyle builds when the frame can accommodate the 109 × 51 × 35mm pack and approximately 349g battery weight.

For FPV use, capacity should always be evaluated together with complete takeoff weight, motor KV, propeller size and intended flying style.

6S Battery for H-King Viper 64 and FMS 64mm F-16 EDF

The compact 2200mAh 6S format may also suit compatible versions of the H-King Viper 64 6S EDF and FMS 64mm F-16 where battery dimensions, XT60 connection and final CG match the aircraft.

For small EDF jets, the lighter 2200mAh capacity favors acceleration and lower landing mass compared with larger 3000mAh-plus packs, while carrying less stored energy.

More 2200mAh and 6S Battery Choices

For the same 2200mAh capacity with a different connector, compare the CNHL G+Plus 2200mAh 6S 70C with EC3.

For more capacity, compare the CNHL G+Plus 3000mAh 6S 70C with XT90. For a lower stated discharge rating at the same capacity, see the CNHL Black Series 2200mAh 6S 40C with XT60.

XT60 Connector

This battery uses an XT60 output connector and connects directly only to the corresponding XT60 device-side connector with correct polarity and orientation.

Models using EC3, IC3, EC5, IC5, XT90 or another connector system require a properly rated adapter or professional connector conversion.

Standard 6S LiPo Charging

This is a standard 6S LiPo battery. Maximum balanced charge voltage is 4.20V per cell, or 25.2V total.

Do not charge this battery using a 4.35V-per-cell LiHV mode.

For routine charging, a balanced 1C rate is preferred. 5C is the stated maximum, not the everyday target.

FAQ

Is this battery suitable for GEPRC TriPro6 O4 Pro?

It is a strong 2200mAh 6S option when the battery mount, dimensions and complete takeoff weight suit the build.

Is 2200mAh suitable for long-range FPV?

It can be a useful middle ground between lower-weight batteries and much larger endurance packs. Actual flight duration depends on aircraft weight, cruise speed, motors, propellers and wind conditions.

Can this battery be used in a 64mm EDF jet?

It may suit compatible 6S 64mm EDF aircraft when the 109 × 51 × 35mm dimensions, approximately 349g weight, XT60 connector and final CG match the model.

Is this a standard LiPo or LiHV battery?

This is a standard 6S LiPo battery with 22.2V nominal voltage and a maximum balanced charge voltage of 25.2V.

Does 70C mean the model always draws high current?

No. 70C is the battery's stated continuous discharge rating. Actual current is determined by the motor, ESC, propeller, EDF unit and operating conditions.

Should this battery always be charged at 5C?

No. For routine charging, a balanced 1C rate is preferred. 5C is the stated maximum, not the everyday target.

Notice

• This is a standard 6S LiPo battery with a maximum charge voltage of 4.20V per cell.
• Do not charge this battery using a 4.35V-per-cell LiHV setting.
• Confirm the 109 × 35 × 51mm dimensions, approximately 349g weight and XT60 connector before use.
• Voltage and connector alone do not establish compatibility; battery dimensions, weight, retention and power-system requirements must also match.
• For FPV use, confirm total takeoff weight, battery mounting security and wire clearance before flight.
• For fixed-wing aircraft, recheck center of gravity whenever battery size, weight or position changes.
• Secure the battery firmly and keep output and balance wires clear of propellers, EDF units, gears and sharp edges.
• Never charge unattended, and do not use a swollen, punctured, damaged or overheated battery.
• Allow the battery to cool before recharging and use storage mode when it will not be used for an extended period.

CNHL products come with a 30 day return from the date of purchase unless otherwise stated in the product listing.

This warranty is limited to original defects in material and workmanship, and does not cover normal wear and tear, crash or water damage, items that have been modified, or any damages arising as a result of improper use. If you find that an item you purchased from us is defective within that 30 day period, please contact us to return the item for inspection. We will usually repair or replace the item at no charge based on our inspection. Customers are responsible for the shipping charges when they are returning the products.

Your country or region must match the correct shipping warehouse. Details below:

US Warehouse

Ships in 1–2 working days via USPS. Free shipping over $69; standard fees apply otherwise. Delivery: 3–7 working days.

US (LA) Warehouse

Ships in 2–3 working days. Standard domestic shipping fees apply.

EU Warehouse

Ships in 1–2 working days. Standard EU shipping fees. Delivery: 5–10 working days.

Global Warehouse

(Global & Global-CN2) Ships in 4–5 working days.

Delivery: 20–25 days, or 10–15 days from Global-CN2. Standard international shipping fees apply.

UK Warehouse

Ships in 1–2 working days via Yodel/Hermes/DPD.

Free shipping over $69; standard fees apply. Delivery: 3–7 working days.

AU Warehouse

Ships in 1–2 working days via AU Post.

Free shipping over $79; standard fees apply. Delivery: 3–7 working days.

CA Warehouse

Ships in 1–2 working days via Amazon UPS/FedEx/Canada Post.

Free shipping over $99; standard fees apply. Delivery: 3–7 working days.