CNHL Super Tucano V2 1600mm Replacement Vertical Stabilizer
No reviews
זמינות:
10+ במלאי, מוכן למשלוח
זמינות:
נותרו רק 2 יחידות
זמינות:
אזל מהמלאי
זמינות:
אזל מהמלאי
מחיר מקורי
$12.99
-
מחיר מקורי
$12.99
מחיר מקורי
$12.99
$12.99 USD
$12.99
-
$12.99
המחיר הנוכחי
$12.99 USD
| /
מדינות מחסני ארה"ב (LA):
ארצות הברית וקנדה (למעט הוואי, פורטו ריקו, ואזורים איים או צבאיים של ארה"ב)
מדינות מחסני ארה"ב:
רק ארה"ב
מדינות מחסני האיחוד האירופי:
מדינות האיחוד האירופי (למעט מלטה/קפריסין)
מדינות מחסני גלובליות: האיחוד האירופי (למעט מלטה/קפריסין), ארה"ב, אוסטרליה, קנדה, בריטניה, שווייץ, ברזיל, צ'ילה, ערב הסעודית, יפן, מלזיה, סינגפור, דרום קוריאה, הפיליפינים, בלארוס, מקסיקו, ניו זילנד, נורווגיה, פרו.
The CNHL STUPV2016 is a replacement vertical stabilizer for the AviNationRC Super Tucano V2 1600mm RC plane. It is designed to replace the original vertical tail section after impact damage, transport damage or wear that makes repair of the existing part impractical.
The stabilizer comes factory finished to match the Super Tucano V2 airframe, including the molded surface detail and scale markings shown in the product image. Two M3×14mm mounting screws are included for installation.
Using the correct V2 replacement part helps maintain the intended vertical-tail geometry, mounting position and overall scale appearance when rebuilding a damaged aircraft.
Quick Fit Check
Part
Replacement Vertical Stabilizer
Compatible Aircraft
CNHL AviNationRC Super Tucano V2 1600mm PNP
Finish
Factory-finished V2 color scheme with scale markings
Mounting Hardware
2 × M3×14mm screws
Stock Number
STUPV2016
CNHL Super Tucano V2 Replacement Vertical Stabilizer
STUPV2016 replaces the vertical tail section of the Super Tucano V2 1600mm. It is a practical solution when the original stabilizer has been damaged during a hard landing, ground incident, transport or storage.
The molded profile, surface detail and exterior finish are matched to the V2 airframe, helping the repaired aircraft retain the intended tail alignment and scale appearance.
This replacement vertical stabilizer is intended for the V2 airframe. Do not assume compatibility with the original V1 / Avios Super Tucano vertical tail unless V1 fitment has been specifically confirmed.
Confirm the vertical stabilizer is seated squarely and securely on the fuselage.
Install and tighten the supplied M3×14mm screws correctly.
Check the tail surfaces for free movement without binding.
Inspect the control horn, ball link and linkage hardware.
Verify correct rudder direction and neutral position after installation.
Check that the vertical tail remains aligned with the fuselage centerline.
Perform a full control check and radio range check before the next flight.
Package Includes
1 × CNHL Super Tucano V2 replacement vertical stabilizer
2 × M3×14mm mounting screws
Notice: This listing includes only the replacement vertical stabilizer and mounting screws shown. Fuselage, horizontal stabilizer, servos, control linkages, flight battery and other aircraft components are not included unless specifically shown.
מוצרי CNHL מגיעים עם אחריות ל-90 יום מתאריך הרכישה, אלא אם צוין אחרת ברשימת המוצר.
אחריות זו מכסה פגמים מקוריים בחומרים ובעבודת הייצור. היא אינה מכסה בלאי רגיל, נפיחות, התנפחות, פריקה יתרה, טעינה יתרה, אחסון לא נכון, נזק מתאונה או מים, החלפת מחברים, או כל נזק הנובע משימוש לא נכון או טיפול לקוי.
אם תגלו שמוצר שנרכש מאיתנו פגום בתוך תקופת האחריות של 90 הימים, אנא צרו קשר כדי לתאם החזרה לבדיקה. בהתבסס על ההערכה שלנו, בדרך כלל נבצע תיקון, החלפה, או נציע פתרון מתאים ללא תשלום נוסף.
אנא שימו לב שהלקוחות אחראים לעלויות המשלוח בעת החזרת מוצרים לבדיקה או שירות במסגרת האחריות.
המדינה או האזור שלך צריכים להתאים למחסן המשלוחים
מחסן גלובלי
למחסן גלובלי (כולל Global-CN2), ההזמנות בדרך כלל נשלחות באמצעות משלוח סטנדרטי תוך 4 עד 5 ימי עבודה, וזמן המשלוח ייקח 20-25 ימים.
מחסן ארה"ב (LA)
למחסן ארה"ב (LA), ההזמנות בדרך כלל נשלחות תוך 2 עד 3 ימי עבודה. ההזמנות נשלחות לארצות הברית באמצעות שירות USPS או FedEx (משלוח חינם בהזמנה מעל $79), זמן המשלוח הוא 3-7 ימי עבודה. אנו גם שולחים לקנדה באמצעות UPS, המשלוח בדרך כלל לוקח 10-12 ימי עבודה, עלות המשלוח היא $169.
מחסן ארה"ב
למחסן ארה"ב, ההזמנות בדרך כלל נשלחות תוך 1 עד 2 ימי עבודה. ההזמנות נשלחות רק לארצות הברית באמצעות שירות USPS (משלוח חינם בהזמנה מעל $69), זמן המשלוח הוא 3-7 ימי עבודה.
מחסן האיחוד האירופי
למחסן האיחוד האירופי, ההזמנות בדרך כלל נשלחות תוך 1 עד 2 ימי עבודה, זמן המשלוח הוא 5-10 ימי עבודה.
מחסן בריטניה
למחסן בריטניה, ההזמנות בדרך כלל נשלחות תוך 1 עד 2 ימי עבודה. ההזמנות נשלחות רק להממלכה המאוחדת באמצעות שירות Yodel/Hermes/DPD (משלוח חינם בהזמנה מעל $69), זמן המשלוח הוא 3-7 ימי עבודה.
מחסן אוסטרליה
למחסן אוסטרליה, ההזמנות בדרך כלל נשלחות תוך 1 עד 2 ימי עבודה. ההזמנות נשלחות רק לאוסטרליה באמצעות שירות AU Post (משלוח חינם בהזמנה מעל $79). זמן המשלוח הוא 3-7 ימי עבודה.
מחסן קנדה
למחסן קנדה, ההזמנות בדרך כלל נשלחות תוך 1 עד 2 ימי עבודה. ההזמנות נשלחות רק לקנדה באמצעות שירות Amazon UPS/FedEx/CA Post (משלוח חינם בהזמנה מעל $99). זמן המשלוח הוא 3-7 ימי עבודה.
CNHL 4500mAh 18.5V 5S 30C Lipo Battery with XT90 Plug
Nigelnix
Top RC Corsair running 4 x 7200 li-hv packs
Just Finishing off my Top RC Corsair running 4 off 7200 Li-Hv packs
2 in series 2 in parallel giving a total capacity of 14,400 Mah for a 8000 DualSky Motor swinging a Beila 24" x 12" 3 blade prop, with loads of power.
Awesome battery for the Traxxas Mini Maxx! It fits perfectly, gives enough power for the BL-2S, and is good to charge! The only issue CNHL should do is make all different connecters to these batteries. This battery came with XT60. My Mini Maxx is TRA connector. The connector on the battery should be TRA. Keep that in mind CNHL!
Good work!