The ISDT P30 is a high-power 8S LiPo smart dual DC charger built for demanding RC battery setups. Each independent channel supports up to 1000W and 30A, while the charger has a maximum total charging capability of 1500W. Standard LiPo batteries are supported from 1S through 8S, making the P30 especially relevant for large RC airplane, helicopter, boat, FPV and high-performance RC car battery systems.
Two independently controlled channels let the P30 operate as a serious dual-channel RC charger, while synchronous parallel charging can combine its available power for one demanding battery task. Bluetooth connectivity, a large 3.5-inch IPS display and detailed battery data make it easier to monitor high-power charging without sacrificing control.
The P30 is a DC-input charger, not an AC wall-powered charger. To approach its higher charging outputs, it must be paired with a suitably capable DC power source, and actual available charging power always depends on the input supply, battery voltage, battery charge-rate limit and operating conditions.
Important power clarification: the P30 is rated for up to 1000W on a single channel and 1500W maximum for the complete charger. Do not interpret “1000W per channel” as 2000W of simultaneous total output.
Why the ISDT P30 Stands Out as a High-Power 8S LiPo Charger
Many hobby chargers are designed around 6S packs. The ISDT P30 extends standard LiPo support to 8S, giving it a much stronger position for higher-voltage RC systems. An 8S LiPo pack reaches 33.6V when fully charged, so useful charging current can require substantial wattage. The P30 combines high cell-count support with the power capability needed to make that support practical.
For users specifically shopping by battery voltage, compare the P30 with other 8S LiPo battery chargers for RC.
Dual 1000W-Class Channels with 30A ×2 Charging
The P30 uses two independently controlled charging channels. Each channel supports a charging-current setting range of 0.2–30A and can reach up to 1000W under suitable operating conditions. That gives the charger substantially more headroom for large-capacity 6S and 8S packs than lower-powered bench chargers.
Independent channels are particularly useful when preparing two RC batteries during the same charging session. Each channel can manage its own supported battery task rather than requiring two batteries to be treated as one pack. Browse more dual and multi-channel LiPo chargers if channel count is one of your main buying criteria.
1500W Synchronous Parallel Charging for Larger Battery Tasks
For a single high-demand battery task, the P30 also supports synchronous parallel operation. The manufacturer's specification gives a maximum whole-charger power of 1500W, while P30 promotional material specifies parallel charging capability up to 50A.
Parallel operation should not be confused with simply charging two batteries independently. It combines charger resources for one appropriately configured charging task and requires the correct power connection and balance connection arrangement.
LiPo 1–8S and Multi-Chemistry Battery Support
The ISDT P30 is more than an 8S LiPo charger. It supports several common rechargeable battery chemistries used in RC and hobby applications.
| LiPo |
1–8S |
| LiFe |
1–8S |
| Li-ion |
1–8S |
| LiHV |
1–7S |
| Pb |
1–12S |
| NiMH / NiCd |
1–16S |
Note: standard LiPo support extends to 8S, while LiHV support extends to 7S. Always select the charging program that matches the actual battery chemistry.
3.5-Inch IPS Display with Detailed Charging Data
A large 3.5-inch high-resolution IPS display gives the P30 a more information-dense interface than compact chargers. Charging current, individual cell voltage, capacity, internal resistance and other task information can be viewed directly from the charger, making it easier to manage large packs and dual-channel charging sessions.
Bluetooth Control and ISDT Mobile Operation
Bluetooth connectivity allows the P30 to pair with the compatible ISDT mobile app. Once paired, supported charger parameters and battery information can be viewed from a phone, and charging tasks can be configured remotely within the charger's supported functions.
The wireless system also supports firmware-related functions, helping keep the charger's software current as supported updates become available.
Efficient Cooling for High-Power RC Charging
High charging power creates heat, so thermal design is especially important on a compact charger. The P30 uses an internal air-convection layout with active cooling and a heat-dissipation structure designed to move air through the charger efficiently during higher-load operation.
Its compact magnesium-alloy housing combines a relatively small footprint with a rigid enclosure and additional heat-dissipation surface area, making the P30 easier to integrate into high-power bench and field charging setups.
DC Power Supply Mode on CH1
In addition to battery charging functions, CH1 can operate as an adjustable DC power supply. Output voltage can be set from 2–30V with current adjustable from 1–5A, adding useful bench-power functionality for compatible hobby electronics and testing tasks.
ISDT P30 Specifications
| Model |
ISDT P30 |
| Input Type |
DC |
| Input Voltage |
DC 10–34V |
| Output Voltage |
DC 1–34V |
| Maximum Input Current |
60A |
| Charging Current |
0.2–30A ×2 |
| Maximum Single-Channel Charging Power |
1000W |
| Maximum Total Charging Power |
1500W |
| Parallel Charging |
Up to 1500W / up to 50A |
| Discharging Current |
0.2–3.0A ×2 |
| Maximum Discharging Power |
30W ×2 |
| Balance Current |
1.5A / Cell Max |
| LiPo / LiFe / Li-ion |
1–8S |
| LiHV |
1–7S |
| Pb |
1–12S |
| NiMH / NiCd |
1–16S |
| Display |
3.5" IPS LCD |
| Bluetooth |
Supported |
| CH1 DC Power Supply |
2–30V / 1–5A |
| Working Temperature |
0–40°C |
| Storage Temperature |
-20–60°C |
| Dimensions |
110 × 110 × 65mm |
| Weight |
Approx. 730g |
| Stock Number |
ISDTP301500WDUDC |
What Power Supply Does the ISDT P30 Need?
Because the P30 is a high-output DC LiPo charger, the external power supply is a major part of the charging system. The charger accepts 10–34V DC input with up to 60A input current capability. A smaller supply can still be used, but charging output must be limited to what that source can safely deliver.
If DC input and external power-supply performance are your main priorities, browse the wider DC LiPo battery charger collection.
Who Is the P30 Best Suited For?
The P30 makes the most sense for users who already have, or plan to build, a capable DC charging power system. It is especially useful for:
- Large 6S and 8S RC airplane or EDF battery packs
- High-capacity helicopter batteries
- Performance RC car and large-scale vehicle packs
- High-power RC boat batteries
- FPV and UAV battery fleets
- Users who regularly charge two high-capacity packs
- Charging benches where very high DC power is already available
ISDT P30 FAQ
Can the ISDT P30 charge an 8S LiPo battery?
Yes. Standard LiPo batteries are supported from 1S through 8S.
Can the P30 charge an 8S LiHV battery?
No. The specified LiHV range is 1–7S. The 8S rating applies to standard LiPo, Li-ion and LiFe operation.
Does the ISDT P30 have two independent charging channels?
Yes. CH1 and CH2 can operate as independent charging channels, each with up to 30A charging-current capability within the charger's total power limits.
Is the ISDT P30 a 2000W charger because each channel is rated up to 1000W?
No. Each individual channel can reach up to 1000W, but the manufacturer's specification lists the maximum power for the complete charger as 1500W.
Does the P30 plug directly into an AC wall outlet?
No. The P30 is a DC-input charger and requires a suitable external DC power source.
Does the P30 support Bluetooth?
Yes. Bluetooth pairing allows compatible mobile control and monitoring through the supported ISDT app.
Can the ISDT P30 work as a DC power supply?
Yes. CH1 supports an adjustable DC power-supply mode from 2–30V and 1–5A.
Explore More RC Battery Chargers
The P30 sits near the high-power end of the ISDT charger range. Browse all ISDT chargers to compare it with compact AC/DC and lower-power DC models.
For a broader comparison across brands, input types and channel configurations, visit the complete LiPo battery charger and RC charger collection.
Charging safety: Always use the correct battery chemistry and cell-count setting, confirm the battery manufacturer's permitted charging current, connect the balance lead when required, and never leave charging batteries unattended.
המדינה או האזור שלך צריכים להתאים למחסן המשלוח
מחסן US
למחסן US, הזמנות בדרך כלל נשלחות תוך 1 עד 2 ימי עבודה. הזמנות נשלחות רק לארצות הברית באמצעות שירות USPS (משלוח חינם בהזמנות מעל $69), זמן המשלוח הוא 3-7 ימי עבודה.
מחסן EU
למחסן EU, הזמנות בדרך כלל נשלחות תוך 1 עד 2 ימי עבודה, זמן המשלוח הוא 5-10 ימי עבודה.
מחסן UK
למחסן UK, הזמנות בדרך כלל נשלחות תוך 1 עד 2 ימי עבודה. הזמנות נשלחות רק להממלכה המאוחדת באמצעות שירות Yodel/Hermes/DPD (משלוח חינם בהזמנות מעל $69), זמן המשלוח הוא 3-7 ימי עבודה.
יתכנו חיובי משלוח נוספים לאזורים מסוימים, כולל ההיילנדס והאיים, איי התעלה, צפון אירלנד, אי מאן, ואי וייט.
מחסן AU
למחסן AU, הזמנות בדרך כלל נשלחות תוך 1 עד 2 ימי עבודה. הזמנות נשלחות רק לאוסטרליה באמצעות שירות AU Post (משלוח חינם בהזמנות מעל $79). זמן המשלוח הוא 3-7 ימי עבודה.
מחסן CA
למחסן CA, הזמנות בדרך כלל נשלחות תוך 1 עד 2 ימי עבודה. הזמנות נשלחות רק לקנדה באמצעות שירות Amazon UPS/FedEx/CA Post (משלוח חינם בהזמנות מעל $99). זמן המשלוח הוא 3-7 ימי עבודה.
מחסן גלובלי
למחסן הגלובלי, הזמנות בדרך כלל נשלחות באמצעות משלוח סטנדרטי תוך 4 עד 5 ימי עבודה, וזמן המשלוח ייקח 15-25 ימים.
