Quick Fit Check
The CNHL Innovation RC Series 10000mAh 22.2V 6S 100C LiPo Battery with EC5 Plug is a high-capacity 6S pack for large RC vehicles, multicopters and other power systems where extended runtime matters more than minimum battery weight.
With 10000mAh capacity, 100C continuous discharge capability and 10AWG output wires, this battery carries substantially more energy than a conventional 5000–6200mAh 6S pack. The tradeoff is physical size and an approximately 1280g V2.0 weight, so battery tray space, vehicle balance and structural support become especially important.
The current V2.0 pack measures approximately 175 × 69 × 50mm (L × W × H). Before ordering, confirm the complete battery space, retention system, EC5 connection and acceptable installed mass for your model.
| Check Item |
Your Model Should Match |
This Battery |
| Cell Count |
6S LiPo-compatible system |
22.2V nominal / 6S1P |
| Maximum Voltage |
ESC supports a fully charged standard 6S LiPo |
25.2V fully charged |
| Battery Space |
Tray or bay can secure a very large 6S pack |
175 × 69 × 50mm V2.0 |
| Installed Weight |
Vehicle or aircraft can safely carry the added mass |
Approx. 1280g V2.0 |
| Connector |
EC5 or physically compatible IC5 main power connection |
EC5 Plug |
| Power Demand |
Battery, connector and wiring support the actual system load |
100C continuous / 200C burst |
V2.0 Product Specifications
| Capacity |
10000mAh |
| Nominal Voltage |
22.2V |
| Cell Configuration |
6S1P |
| Energy |
222Wh |
| Fully Charged Voltage |
25.2V / 4.20V per Cell |
| Discharge Rate |
100C Continuous / 200C Burst |
| Maximum Charge Rate |
5C |
| Output Connector |
EC5 Plug |
| Balance Connector |
JST-XH 7-Pin |
| Dimensions (L × W × H) |
175 × 69 × 50mm |
| Approx. Weight |
1280g |
| Wire Gauge |
10AWG |
| Stock Number |
10001006EC5 |
Battery dimensions may vary by approximately 1–5mm, and weight tolerance is approximately ±5g.
V1 vs. V2.0 Size Reference
The current V2.0 version uses the same 10000mAh 6S 100C electrical specification but has a revised physical format. Owners replacing an older pack should compare dimensions rather than assuming that V1 and V2.0 occupy exactly the same space.
| Specification |
V2.0 |
Legacy V1 |
| Dimensions (L × W × H) |
175 × 69 × 50mm |
177 × 66 × 49mm |
| Approx. Weight |
1280g |
1200g |
| Capacity |
10000mAh |
10000mAh |
| Voltage |
22.2V / 6S |
22.2V / 6S |
| Discharge Rating |
100C / 200C |
100C / 200C |
High-Capacity 10000mAh 6S Power
The defining feature of this battery is its 222Wh energy capacity. A 10000mAh 6S battery stores substantially more energy than a conventional 5000–6200mAh 6S pack, making it especially attractive for applications where replacing batteries frequently is inconvenient.
For large RC vehicles, that means longer driving sessions between charges. For multicopters and other endurance-oriented platforms, it can provide additional energy reserve when the aircraft can safely carry the battery mass.
The tradeoff is weight. At approximately 1280g, this battery adds considerably more mass than a typical mid-capacity 6S pack. Increased battery weight affects acceleration, braking distance, suspension load, center of gravity and overall vehicle inertia, so the largest battery is not automatically the best battery for every model.
Why Choose This Battery?
-
10000mAh capacity: Built for extended runtime and fewer battery changes.
-
222Wh of stored energy: Significantly more energy than common 5000–6200mAh 6S packs.
-
100C continuous output: Supports high-current RC power systems when properly matched.
-
EC5 connector: Suitable for high-current applications and physically compatible with IC5 main power connections.
-
10AWG output wires: Appropriate for demanding 6S installations.
-
Single 6S configuration: Provides full 22.2V nominal voltage without managing two separate 3S batteries.
10000mAh 6S Battery for ARRMA MOJAVE 6S V3 & EXB
The CNHL Innovation RC Series 10000mAh 22.2V 6S 100C LiPo Battery is a high-capacity option for the ARRMA MOJAVE 6S V3 and MOJAVE 6S EXB RTR when extended runtime is the priority.
This application is particularly useful because it is not based only on theoretical dimensions. A CNHL 10000mAh 6S pack has been physically installed and secured in the current MOJAVE V3 battery area, confirming that this high-capacity battery format can be accommodated when the pack is positioned and retained correctly.
The 10000mAh capacity provides substantially more energy than common 5000–6200mAh MOJAVE batteries. This can reduce the number of battery changes during long bash sessions, large open-area runs and extended driving sessions.
The tradeoff is the approximately 1280g battery weight. Compared with a lighter 6S pack, the truck carries more inertia. That can increase braking load, suspension workload and the energy involved in hard landings and direction changes.
For this reason, the 10000mAh configuration is best viewed as a runtime-focused MOJAVE setup, not automatically the fastest or most agile battery choice.
The battery uses EC5, while the current MOJAVE uses an IC5 vehicle-side connection. EC5 and IC5 are physically compatible at the main power interface, so normal positive and negative power can be supplied without an adapter. This conventional CNHL EC5 battery does not provide Spektrum Smart battery data.
For more single-6S, high-capacity and dual-3S options selected for the current 1/7 platform, explore the ARRMA MOJAVE 6S Battery Collection.
6S 10000mAh Battery for DJI S800 and Light-Payload S900 Builds
The 10000mAh 6S format can also be relevant to compatible DJI S800 and S800 EVO configurations where a single high-capacity battery is preferred.
For these multicopter platforms, battery selection must consider more than capacity. Total takeoff weight, camera payload, gimbal, propulsion condition, battery mounting and center of gravity all affect usable endurance and handling.
A 10000mAh pack may also be considered in selected DJI S900 configurations used for lighter payloads, system testing or shorter missions where the aircraft can safely support the battery's physical size and mass.
Many DJI S-series power setups use XT90 rather than EC5. The EC5 to XT90 adapter provides a connector solution when the adapter's current rating, polarity and physical arrangement suit the complete power system.
Compare more capacity and connector options in the DJI S1000, S900 and S800 Battery Collection.
Large RC Cars, Trucks and High-Power 6S Systems
This battery is best suited to large RC platforms that can physically accommodate a 175 × 69 × 50mm battery and safely carry approximately 1280g of installed battery mass.
It should not be described as universally compatible with all 1/8 or 1/10 vehicles simply because they are RC cars. Many vehicles in those scales support only 2S, 3S or 4S, while others have battery compartments that are far too small for this pack.
For suitable 6S vehicles, the main advantage is runtime. The 10000mAh capacity can keep a high-power truck or large-scale vehicle running longer between pack changes, provided the chassis, suspension and battery retention system are suitable for the additional weight.
10000mAh vs. 6200mAh 6S Battery
| Priority |
10000mAh 6S |
6200mAh 6S |
| Energy Reserve |
Very high |
Moderate-high |
| Runtime Priority |
Maximum practical runtime |
Balance of runtime and weight |
| Installed Mass |
Approx. 1280g |
Substantially lighter |
| Handling |
More inertia and planted feel |
More responsive |
| Best Use |
Long sessions and runtime-focused setups |
General high-performance 6S use |
A 10000mAh battery is not automatically an upgrade over a 6200mAh pack. The better choice depends on whether the model benefits more from additional energy or from lower installed weight.
EC5 and IC5 Connector Compatibility
This battery includes an EC5 output plug. EC5 and IC5 are physically compatible at the main positive and negative power interface.
A conventional EC5 battery can therefore power a compatible IC5-equipped vehicle without an adapter when polarity and connector orientation are correct.
This CNHL battery is not a Spektrum Smart battery and does not provide automatic battery identification, Smart charging settings or battery telemetry through the IC5 data contact.
XT90, XT60, EC3, IC3, TRX and other connector systems do not directly plug into EC5. Use an appropriately rated adapter or professional connector conversion where required.
More 6S Battery Options
If you want the same 10000mAh capacity with a different high-current connector, compare the 10000mAh 6S 100C battery with QS8 plug.
For slightly lower capacity and reduced battery mass, compare the CNHL Racing Series 9500mAh 6S 90C EC5.
Drivers and pilots who want a more conventional balance of runtime, size and weight can also compare the CNHL Racing Series 6200mAh 6S 90C EC5.
Product Image
FAQ
Is this a standard LiPo or LiHV battery?
This is a standard 6S LiPo battery. Its nominal voltage is 22.2V and its maximum balanced charge voltage is 25.2V, or 4.20V per cell.
Does this 10000mAh battery fit the ARRMA MOJAVE 6S?
A CNHL 10000mAh 6S pack has been physically installed and secured in the current MOJAVE V3 battery area. Because battery dimensions can vary slightly between production versions, confirm the current V2.0 dimensions, wire routing and retention before use.
Will 10000mAh make the MOJAVE faster?
Not necessarily. Higher capacity primarily provides more stored energy and potentially longer runtime. The additional battery weight can also increase vehicle inertia, braking load and suspension workload.
Is EC5 compatible with IC5?
Yes. EC5 and IC5 are physically compatible for the main power connection. This conventional EC5 battery does not provide Spektrum Smart battery data.
Can this battery be used with DJI S800 or S900?
It can be considered for compatible S800, S800 EVO and selected light-payload S900 configurations when battery dimensions, total takeoff weight, connector arrangement and center of gravity are suitable.
What is the difference between V1 and V2.0?
The electrical specification remains 10000mAh, 22.2V 6S and 100C, but the physical dimensions and weight differ. V2.0 is approximately 175 × 69 × 50mm and 1280g, while the older V1 was approximately 177 × 66 × 49mm and 1200g.
Should this battery always be charged at 5C?
No. The 5C specification is the maximum charge rate, not the required everyday charging rate. A lower balanced charge rate generally creates less heat and places less stress on the battery.
Notice
- This is a standard 6S LiPo battery with a maximum charge voltage of 4.20V per cell.
- Use a compatible LiPo balance charger and select the correct six-cell setting.
- Confirm the current V2.0 dimensions of 175 × 69 × 50mm, approximately 1280g weight and EC5 connector before use.
- V1 and V2.0 packs have slightly different physical dimensions and weights, so replacement fitment should be checked.
- EC5 and IC5 are physically compatible for main power, but this battery does not provide Spektrum Smart data.
- The high 10000mAh capacity also means high battery mass; confirm chassis, aircraft or battery-mount support before operation.
- Secure the battery firmly and keep the output and balance wires clear of gears, driveshafts, propellers and sharp edges.
- Never charge unattended, and do not use a swollen, punctured, damaged or overheated battery.
- Allow the battery to cool before recharging and use storage mode when it will not be used for an extended period.
