What Battery Does the Team Associated RC10 6x6 Use?
The RC10 Custom Race Car 6x6 uses a compact battery tray secured by hook-and-loop straps rather than a rigid upper battery brace. This makes the chassis well suited to common Shorty LiPo battery dimensions and allows both standard-height and low-profile packs to be considered.
| Vehicle | Team Associated RC10 Custom Race Car 6x6 #30146 |
| Scale | 1/10 |
| Vehicle Type | On-Road / Formula-Inspired Custom Race Car |
| Drive System | 6WD / Three-Axle Six-Wheel Drive |
| Recommended Battery Direction | 2S Shorty LiPo |
| Typical Shorty Footprint | Approximately 96 × 47mm |
| Battery Height | Standard Shorty or Low Profile Shorty |
| Connector | Depends on the ESC selected for the build |
Our Top 3 Battery Choices for the RC10 6x6
There is no single best capacity for every RC10 6x6 build. A higher-capacity Shorty can extend runtime, while a lighter LP Shorty can reduce battery weight and lower the battery mass in the chassis. These three CNHL options cover the most useful setup directions.
1. 6400mAh 2S LiHV 130C Shorty – Best for Higher Capacity
The CNHL Racing Series 6400mAh 7.6V 2S 130C Shorty is the strongest choice when capacity is the priority. Its Shorty footprint keeps it suitable for compact racing-style battery trays while offering considerably more capacity than many traditional Shorty packs.
This makes it especially attractive for drivers who want longer sessions without moving to a full-length stick pack. It is also a good match for the RC10 6x6 concept, where six driven wheels and three differentials create a drivetrain that benefits from a battery capable of maintaining consistent power delivery.
2. 4600mAh 2S LiHV 130C LP Shorty – Best Low-Profile Option
The CNHL Ultra-Thin Racing Series 4600mAh 7.6V 2S 130C LP Shorty takes a very different approach. LP means Low Profile, and this pack is designed to reduce battery height and weight while retaining strong discharge capability.
For builders who prefer a lighter battery setup or simply want more clearance around the battery area, an LP Shorty is a particularly clean solution. It is also useful when tuning chassis balance with additional weights rather than carrying unnecessary battery mass.
3. 4900mAh 7.4V 2S 120C Shorty – Best Standard 2S Choice
For a more traditional setup, the CNHL Racing Series 4900mAh 7.4V 2S 120C Shorty stays with standard 2S LiPo voltage. This closely follows the 2S 7.4V battery specification listed in the RC10 6x6 instruction manual and avoids the additional voltage considerations associated with fully charged LiHV packs.
It is a strong all-around choice for builders who want a conventional Shorty battery format with good capacity and high discharge capability.
Standard Shorty vs LP Shorty
Both formats can work well in the RC10 6x6. The main difference is height.
| Standard Shorty | Usually around 24–26mm high and generally offers more capacity. |
| LP Shorty | Low Profile design, commonly around 18–20mm high, typically reducing battery weight and height. |
| Best for Runtime | Higher-capacity standard Shorty |
| Best for Lower Battery Mass | LP Shorty |
Can You Use a 2S LiHV Battery in the RC10 6x6?
A 2S LiHV Shorty can be physically suitable for this battery layout, but the important question is the electronics installed in the car. A standard 2S LiPo is charged to 8.4V, while a fully charged 2S LiHV reaches a higher voltage.
Because the RC10 Custom Race Car 6x6 is sold as a kit without an ESC or motor, confirm that your chosen power system supports the intended maximum battery voltage before charging a LiHV pack to full LiHV voltage. If full LiHV support is not confirmed, follow the voltage limits of your electronics and charger.
Does the RC10 6x6 Require a Specific Battery Connector?
No. The RC10 6x6 does not include an ESC, so there is no single factory battery connector that every build must use.
CNHL Shorty batteries are available with connectors such as XT60, EC3, EC5 and T/Dean depending on the model. Choose a battery that matches the connector installed on your ESC, or configure the electronics around the connector standard you prefer.
Why Battery Choice Matters on a Six-Wheel 6WD RC Car
The RC10 Custom Race Car 6x6 is very different from a conventional 1/10 Formula chassis. Six driven wheels, three sealed differentials and three independent suspension assemblies create a distinctive drivetrain with a strong emphasis on traction and stability.
Team Associated’s driving demonstration highlights straight launches, stable behavior and strong on-power traction through corners. A good battery choice should therefore provide consistent output without adding unnecessary size or weight to the chassis.
That is why Shorty packs make so much sense here: they combine racing-oriented dimensions with enough capacity and discharge capability for a high-traction 6WD platform.
How to Choose the Right RC10 6x6 Battery
Choose a higher-capacity Shorty if runtime is your main priority.
Choose an LP Shorty if you want a lighter, lower-profile battery installation.
Choose a standard 7.4V 2S LiPo if you prefer the most straightforward voltage setup.
Choose the connector last. Since the ESC is supplied by the builder, match the battery connector to your electronics rather than treating one connector type as mandatory for the vehicle.
You can also browse the wider CNHL 2S LiPo battery collection or explore more batteries for cars in the CNHL RC car battery collection.
Team Associated RC10 6x6 Battery FAQ
What battery does the Team Associated RC10 6x6 use?
The RC10 Custom Race Car 6x6 is well suited to 2S Shorty LiPo batteries. The instruction manual specifies a 2S 7.4V LiPo battery, while the vehicle’s strap-style battery mounting system accommodates standard and low-profile Shorty formats.
Can the RC10 6x6 use a 3S LiPo?
Team Associated’s product information mentions 2S/3S LiPo among the required-to-complete options, but the instruction manual specifically lists 2S 7.4V. Because the ESC and motor are not included, 3S compatibility depends on the electronics installed in your build. This collection therefore focuses on 2S batteries.
What does LP Shorty mean?
LP means Low Profile. An LP Shorty battery has a similar compact footprint to a standard Shorty pack but uses a lower case height, helping reduce battery weight and vertical mass in the chassis.
What capacity is best for the RC10 6x6?
There is no single required capacity. Higher-capacity Shorty packs are useful for longer runtime, while lower-capacity LP Shorty batteries can reduce weight. Capacity should be chosen together with battery dimensions, weight and the goals of your build.
Does the RC10 6x6 use XT60, EC3, EC5 or T/Dean?
The vehicle does not have one mandatory battery connector because the ESC is not included with the kit. Use the connector that matches the ESC installed in your RC10 6x6.
Is a LiHV Shorty better than a standard LiPo Shorty?
Neither is automatically better. A standard 7.4V 2S LiPo is the simplest choice, while a 7.6V 2S LiHV pack can offer another racing-oriented option when the installed ESC and motor support the intended maximum voltage. Choose based on your electronics, capacity requirement and preferred battery dimensions.
