Best LiPo Batteries for the Team Associated RC10L Kit
The Team Associated RC10L brings classic 1/10 scale pan car racing into the modern LiPo era. Unlike its original battery arrangement, the updated RC10L features a centralized shorty battery mounting system designed to work with contemporary racing electronics.
For RC10L owners, the key decision is whether to build around a 1S racing power system or a 2S setup. Both battery configurations are supported by the RC10L platform, but they require compatible electronics and appropriate gearing.
CNHL offers three particularly useful shorty hardcase choices, each serving a different racing setup.
Our Top 3 Team Associated RC10L Battery Picks
1. CNHL Racing 8200mAh 1S LiHV – Best for 1S Pan Car Racing
The CNHL Racing Series 8200mAh 3.8V 1S 130C Shorty LiHV Battery is our first recommendation for RC10L builders choosing a dedicated 1S racing configuration.
Team Associated recommends a Reedy 8300mAh 1S racing battery for the RC10L. The CNHL 8200mAh offers a closely matched capacity in a compact 1S LiHV format, making it an attractive alternative for compatible 1S electronics.
- Capacity: 8200mAh
- Voltage: 3.8V / 1S LiHV
- Discharge rating: 130C continuous
- Dimensions: 91 × 46 × 18mm
- Weight: Approximately 150g
- Connection: 5mm bullet terminals with XT60 connection lead
Its 18mm low-profile hardcase is well suited to the design priorities of a racing pan car. The relatively light pack also gives builders flexibility when planning overall chassis weight distribution.
Best for: RC10L owners using a 1S-compatible ESC and motor combination, particularly those prioritizing high capacity and low-profile battery packaging.
2. CNHL Racing 4900mAh 2S LiHV – Best Balanced 2S Shorty Option
For builders choosing a 2S power system, the CNHL Racing Series 4900mAh 7.6V 2S 120C Shorty LiHV Battery provides a practical balance of capacity, pack weight, and compact dimensions.
Its shorty hardcase measures only 96mm in length and weighs approximately 183g, offering useful capacity without requiring a conventional full-length 2S battery.
- Capacity: 4900mAh
- Voltage: 7.6V / 2S LiHV
- Discharge rating: 120C continuous
- Dimensions: 96 × 46 × 25mm
- Weight: Approximately 183g
- Connector: EC3
This pack is a strong choice for an RC10L equipped with a suitable 2S brushless system. Compared with the 1S battery option, the higher-voltage configuration changes the electrical demands and driving characteristics of the vehicle, so motor selection and gearing should be planned accordingly.
Best for: RC10L builds using 2S-compatible electronics where balanced capacity and a compact shorty format are the priorities.
3. CNHL Ultra-Thin 4000mAh 2S LiHV – Best Low-Profile 2S Choice
The CNHL Ultra-Thin Racing Series 4000mAh 7.6V 2S 120C LP Shorty Battery is particularly appealing for pan car enthusiasts who pay close attention to battery placement and chassis balance.
At just 18.5mm high, this hardcase battery is substantially thinner than the 25mm-tall CNHL 4900mAh 2S option. It offers a different approach to battery packaging, particularly for low-profile on-road racing chassis.
- Capacity: 4000mAh
- Voltage: 7.6V / 2S LiHV
- Discharge rating: 120C continuous
- Dimensions: 96 × 47 × 18.5mm
- Weight: Approximately 171g
- Connector: EC3
The thinner case allows greater flexibility when positioning the battery mass within the chassis. This can be useful when fine-tuning an on-road car's overall weight distribution, although the actual center-of-gravity benefit depends on mounting height and the rest of the electronics layout.
Best for: RC10L drivers who prefer a slimmer 2S shorty pack and value a lower-profile battery installation over maximum capacity.
RC10L Battery Comparison: 1S vs 2S Shorty LiPo
| Specification | 8200mAh Racing | 4900mAh Racing | 4000mAh Ultra-Thin |
|---|---|---|---|
| Configuration | 1S LiHV | 2S LiHV | 2S LiHV |
| Nominal Voltage | 3.8V | 7.6V | 7.6V |
| Capacity | 8200mAh | 4900mAh | 4000mAh |
| Continuous C Rating | 130C | 120C | 120C |
| Dimensions (L × W × H) | 91 × 46 × 18mm | 96 × 46 × 25mm | 96 × 47 × 18.5mm |
| Approx. Weight | 150g | 183g | 171g |
| Connector | 5mm Bullet / XT60 Lead | EC3 | EC3 |
| Recommended Focus | 1S Racing | Balanced 2S | Low-Profile 2S |
Battery dimensions and weights are based on CNHL product specifications. Confirm mounting hardware, wire clearance, and the selected electronic configuration during assembly.
How to Choose the Right RC10L Battery
1. Choose Your Power System: 1S or 2S
The RC10L kit supports suitable 1S and 2S LiPo batteries. However, the battery voltage must match the ESC and motor configuration.
A 1S LiPo provides approximately 3.7V nominal, while a 2S LiPo provides approximately 7.4V nominal. LiHV versions are rated at 3.8V and 7.6V respectively. Moving from 1S to 2S is therefore a significant electrical change, not simply a capacity upgrade.
For organized racing, always check the permitted battery cell count, maximum charging voltage, motor class, and other event requirements before finalizing your RC10L setup.
2. Consider Battery Weight and Placement
The RC10L uses a centralized shorty LiPo mounting layout, placing battery mass close to the middle of the chassis. On a lightweight on-road pan car, battery weight and installation height can influence overall balance and handling response.
Our three featured CNHL batteries weigh approximately 150–183g. The best option is not automatically the lightest or highest-capacity pack. Consider your desired chassis balance, minimum race weight, traction conditions, and available battery mounting space.
3. Match the Battery Connector to Your ESC
Because the Team Associated RC10L is a kit, the required ESC and power connector depend on the electronics chosen during assembly.
Our recommended 2S shorty packs feature EC3 connectors, while the 8200mAh 1S racing battery uses 5mm bullet terminals with an XT60 connection lead.
Check connector compatibility, polarity, wire routing, and available clearance before powering the car. If your ESC uses a different connection, explore our RC battery connector adapters or select an appropriate racing power lead.
4. Understand LiHV Charging Requirements
CNHL LiHV packs can be charged to their rated high-voltage limit only when the charger, battery, and applicable racing rules permit it.
A fully charged 1S LiHV pack can reach 4.35V, while a 2S LiHV pack can reach 8.70V. If the equipment or racing class requires standard LiPo limits, use 4.20V per cell instead.
Always use the correct charger mode and follow battery-specific charging instructions. Never assume that an ESC supporting conventional 2S LiPo automatically permits every LiHV charging configuration.
Team Associated RC10L Battery FAQ
What battery does the Team Associated RC10L use?
The Team Associated RC10L Kit supports suitable 1S or 2S LiPo batteries, along with compatible NiMH arrangements. The modern kit includes a centralized shorty LiPo mounting system. CNHL offers compatible shorty racing batteries in both voltage configurations.
Can I use a 2S LiPo battery in the RC10L?
Yes. The RC10L supports 2S LiPo configurations when equipped with an appropriate ESC, motor, and wiring setup. CNHL 4900mAh and Ultra-Thin 4000mAh 2S LiHV shorty batteries are two recommended options.
Is a 1S or 2S LiPo better for RC10L racing?
Neither is universally better. A 1S configuration closely follows the voltage category of Team Associated's officially recommended racing battery. A 2S setup provides a higher-voltage alternative. The correct choice depends on your electronics, gearing, driving conditions, and competition rules.
What is the best CNHL 1S battery for the RC10L?
Our preferred 1S option is the CNHL Racing Series 8200mAh 3.8V 130C Shorty LiHV Hardcase Battery. Its high capacity and low-profile dimensions make it well suited to a dedicated 1S pan car racing build.
Does battery capacity affect RC10L handling?
Battery capacity alone does not determine handling, but different battery packs vary in weight and dimensions. Their installation can influence chassis balance, center of gravity, and available space for other electronics. Choose capacity together with weight and packaging rather than considering mAh alone.
Does the RC10L come with a battery and charger?
No. The Team Associated RC10L is a kit that requires separate electronics and a suitable battery and charger. Required items also include an ESC, motor, receiver, transmitter, and steering servo.
Can I use RC12R8 racing batteries in the RC10L?
Both the RC10L and RC12R8 are on-road pan car platforms, and compatible 1S shorty racing batteries can be relevant to both. However, the cars have different chassis layouts and mounting systems. Always match the battery dimensions, connection method, and electronic configuration to the specific vehicle.
Explore More CNHL Racing LiPo Batteries
Building another competition on-road RC car or comparing battery formats? Explore more CNHL battery collections:
- Team Associated RC12R8 LiPo Batteries – 1/12 scale on-road pan car battery options.
- 1S Shorty LiPo Batteries – Compact racing batteries for dedicated 1S platforms.
- Shorty LiPo Batteries – Explore different capacities and voltage configurations.
- CNHL Racing Series LiHV Hardcase Batteries – High-performance racing battery options.
Whether you prefer the traditional 1S pan car racing approach or a modern 2S power setup, CNHL offers compact shorty LiPo batteries to help complete your Team Associated RC10L Kit with the capacity, dimensions, and discharge performance your build requires.