Quick Fit Check
The CNHL MiniStar 850mAh 11.1V 3S 70C LiPo Battery with XT60 Plug is a compact high-output 3S battery for RC users who need light weight, quick throttle response, and an XT60 connector in a small pack size. With 850mAh capacity, 11.1V 3S voltage, 70C discharge output, and an approximately 86g weight, this MiniStar pack is well suited for 150–180 size FPV drones, micro FPV racing builds, compact RC aircraft, and selected small battery-tray crawler setups.
This battery is best used when your model supports 11.1V 3S LiPo power, has enough space for a 62 × 30 × 25mm pack, and uses an XT60 connector or a properly rated adapter. For FPV drones, check battery strap position, prop clearance, all-up weight, and current draw. For crawlers such as Redcat Vertex 10, check battery tray fitment, wire routing, retention, and ESC voltage settings before use.
Product Specifications
| Capacity |
850mAh |
| Voltage (S/cell) |
11.1V / 3S / 3 Cell |
| Discharge Rate (Continuous/Burst) |
70C / 140C |
| Output Connector |
XT60 Plug |
| Dimensions (L × W × H) |
62 × 30 × 25mm |
| Weight |
Approx. 86g |
| Charge Rate |
5C Max |
| Balance Connector |
JST / XH |
| Stock Number |
85703G |
Core Description
The CNHL MiniStar 850mAh 3S 70C LiPo battery is built for compact RC setups where every gram matters. The 850mAh capacity keeps the pack small and light, while the 70C discharge rating gives stronger current support than many basic micro packs. That makes it useful for fast throttle response, short high-output runs, and compact builds that need a real XT60 3S battery.
For FPV pilots, this battery is a practical option for 150–180 size multirotors, micro FPV racing drones, and similar compact platforms where 3S voltage and XT60 wiring are used. It provides a balance between punch and weight, helping small aircraft stay responsive without carrying an oversized battery.
For crawler users, this same compact size can be useful when a larger 3S pack is difficult to install. The short 62mm length and XT60 connector make it relevant for tight battery trays, but runtime will be shorter than larger 1500mAh, 2200mAh, or 3000mAh crawler packs.
3S LiPo Battery for 150–180 FPV Drones
The CNHL MiniStar 850mAh 11.1V 3S 70C LiPo Battery with XT60 Plug is specially designed for compact 3S multirotor and FPV applications. It can be considered for 150, 180, and similar micro FPV racing drone setups where battery size, all-up weight, connector type, and current demand match.
Typical use cases include micro FPV racing drones, compact freestyle builds, and small multirotor platforms that need a lightweight 3S pack. Model references may include Multirotor 150 / 180 size FPV, micro FPV racing drones, and similar XT60-equipped builds, but actual compatibility should always be checked by size, weight, connector, and ESC rating.
For FPV use, avoid choosing by capacity alone. A battery that is too heavy can make a small quad feel sluggish, while a pack that is too small may sag quickly under load. This 850mAh 3S pack is aimed at pilots who want a compact power source with strong discharge support for short, responsive flights.
Also Recommended for Redcat Vertex 10 Crawlers
The CNHL MiniStar 850mAh 11.1V 3S 70C LiPo Battery with XT60 Plug is a compact 3S option selected for the Redcat Vertex-10 and Redcat Vertex 10W brushless crawler platform. With its XT60 connector and small MiniStar layout, this pack is a practical option for drivers who want smooth low-speed control, useful punch, and clean fitment in the compact Vertex 10 battery area.
For most Redcat Vertex 10 drivers, 3S is the best everyday setup. It gives the Hobbywing brushless outrunner system enough power for technical crawling while keeping throttle response easier to manage than a more aggressive 4S setup. This 850mAh pack is best for short technical sessions, testing, lightweight setup tuning, or drivers who prioritize compact fit over maximum runtime.
See the full fitment guide here: LiPo Battery for Redcat Vertex-10 and Redcat Vertex 10W.
Why Choose a Small 850mAh 3S XT60 Battery?
A small 850mAh 3S LiPo battery makes sense when compact fit and low weight are more important than maximum runtime. In FPV drones, lower battery weight can improve agility, response, and control feel. In compact crawlers, a smaller battery can be easier to position and may help reduce weight high in the chassis.
The 70C discharge rating helps this battery support quick throttle changes in small power systems. It is especially useful for pilots and drivers who want a compact battery that still feels responsive under load.
The XT60 plug is another practical advantage. Many compact FPV drones, small RC aircraft, and crawler ESC setups use XT60 connectors, which keeps installation cleaner than using an adapter. If your model uses another connector, use a properly rated adapter or connector conversion and confirm polarity before running.
Applications
- 150 and 180 size 3S FPV multirotors
- Micro FPV racing drones using XT60 connectors
- Compact freestyle FPV builds where 850mAh 3S weight is suitable
- Redcat Vertex-10 and Redcat Vertex 10W short-session 3S crawler setups
- Small RC aircraft and compact 3S hobby builds
- XT60-equipped 11.1V systems needing a small 3S battery
- Lightweight setup testing, tuning, and short technical sessions
Product Photo
What to Check Before Buying
-
Voltage: Your model must support 11.1V 3S LiPo power.
-
Connector: This battery uses an XT60 plug. Use a properly rated adapter if your model uses XT30, EC3, IC3, T/Dean, or another connector type.
-
Battery size: Confirm your battery area can fit 62 × 30 × 25mm.
-
Weight: At approximately 86g, this pack is light and compact, but CG and strap position still matter.
-
FPV use: Check motor KV, prop size, ESC rating, all-up weight, and flight time expectations.
-
Crawler use: Check battery retention, wire clearance, ESC voltage support, and expected runtime before trail use.
-
Charging: Use a compatible 3S LiPo balance charger with JST-XH balance support.
FAQ
What is this 850mAh 3S LiPo battery best used for?
It is best used for 150–180 size FPV drones, micro FPV racing builds, compact 3S aircraft, Redcat Vertex 10 short-session crawler setups, and other small XT60-equipped RC systems.
Can this battery work in FPV racing drones?
Yes, it can be used in 3S micro FPV racing drones when the drone supports 3S voltage, XT60 connector setup, and the 86g battery weight. Always check motor, ESC, prop, and frame recommendations.
Can this battery work in the Redcat Vertex 10?
Yes, it can be used as a compact 3S option for Redcat Vertex-10 and Redcat Vertex 10W setups where tray fitment and wire routing are suitable. It is best for shorter sessions rather than maximum runtime.
Is 850mAh enough for crawling?
It depends on your goal. 850mAh is compact and lightweight, but runtime will be shorter than larger crawler packs. It is best for short technical runs, fitment testing, tuning, or lightweight setups.
Is XT60 the same as XT30?
No. XT60 and XT30 are different connector formats. This battery comes with an XT60 plug, so check your ESC connector before ordering.
Can I use this battery in a larger RC car or truck?
Usually this battery is too small in capacity for larger cars and trucks. It is mainly intended for compact FPV, small aircraft, and selected small-tray crawler setups.
Notice
- Only use a compatible LiPo balance charger designed for 3S LiPo batteries.
- Stop charging immediately if any cell exceeds 4.2V.
- Check voltage, connector type, battery bay size, strap position, wire clearance, ESC rating, and center of gravity before purchase.
- Inspect the battery surface, connector, wires, balance lead, and cell voltage before first use.
- Do not use the battery if it becomes swollen, damaged, overheated, or physically deformed.
- For FPV use, monitor voltage sag and land before over-discharging the battery.
- For crawler use, expect shorter runtime than larger 3S packs and avoid leaving the battery loose in the chassis.
- For long-term storage, store the battery at proper storage voltage in a cool and dry place.
- If a new battery does not initially hold full performance, several normal balanced charge and discharge cycles may help stabilize the cells.
- Always follow standard LiPo safety procedures during charging, storage, transport, and use.
