The CNHL STUPV2005 is a replacement main wing mounting brackets and hardware set for the AviNationRC Super Tucano V2 1600mm RC plane. These wing attachment and fixing components are installed at the wing-to-fuselage joint to help secure and reinforce the main wing assembly.
The set includes two main wing mounting brackets, one reinforcement plate and six mounting screws as shown in the product image. It is a practical replacement when the original wing fixing hardware has been damaged, lost or removed during wing or fuselage repair.
Because this hardware forms part of the Super Tucano V2 wing mounting system, correct alignment and secure installation are important before the aircraft is returned to flight.
Quick Fit Check
Part
Replacement Main Wing Mounting Brackets & Hardware Set
Compatible Aircraft
CNHL AviNationRC Super Tucano V2 1600mm PNP
Main Wing Mounting Brackets
2 included
Reinforcement Plate
1 included
Mounting Screws
6 included
Application
Main wing-to-fuselage mounting and reinforcement
Stock Number
STUPV2005
CNHL Super Tucano V2 Replacement Wing Mounting Hardware
STUPV2005 is used at the main wing and fuselage joining area of the Super Tucano V2. The two mounting brackets sit across the wing attachment points, while the reinforcement plate and screws help secure the joint and maintain the intended mounting arrangement.
This set is especially useful after replacing a wing or fuselage section, or when the original wing fixing parts have been damaged during disassembly, transport or repair.
Main Wing-to-Fuselage Fixing System
The Super Tucano V2 uses dedicated hardware at the main wing-to-fuselage joint. These brackets and fixing parts help keep the wing correctly positioned while providing a secure mechanical connection at the attachment area.
During installation, make sure the wing and fuselage are correctly aligned before tightening the screws. The brackets should sit flat against the intended mounting surfaces without forcing or distorting the surrounding foam structure.
This replacement hardware set is designed around the Super Tucano V2 wing mounting arrangement.
For replacement wings, fuselage sections, landing gear, cockpit parts, propeller components and other aircraft hardware, browse the Super Tucano V1 & V2 spare parts collection.
Confirm the main wing and fuselage are correctly aligned before installing the hardware.
Make sure both mounting brackets sit flat against the intended attachment points.
Position the reinforcement plate correctly before tightening the screws.
Tighten the screws evenly without crushing or deforming the surrounding foam.
Check the complete wing-to-fuselage joint for movement, gaps or looseness.
Inspect nearby wiring and control connections after installation.
Re-check wing alignment and aircraft CG before flight.
Package Includes
2 × CNHL Super Tucano V2 main wing mounting brackets
1 × Reinforcement plate
6 × Mounting screws
Notice: This listing includes only the replacement main wing mounting brackets, reinforcement plate and screws shown. Main wing, fuselage, adhesive and other aircraft components are not included unless specifically shown.
CNHL-tuotteilla on 90 päivän takuu ostopäivästä lukien, ellei tuotteen ilmoituksessa toisin mainita.
Tämä takuu kattaa alkuperäiset materiaalien ja työn laadun viat. Se ei kata normaalia kulumista, pullistumista, turpoamista, ylilatausta, ylilatausta, virheellistä säilytystä, kolhuja tai vesivahinkoja, liittimien vaihtoja tai mitään vahinkoja, jotka johtuvat väärinkäytöstä tai käsittelyvirheestä.
Jos havaitset, että meiltä ostettu tuote on viallinen 90 päivän takuuajan kuluessa, ota meihin yhteyttä järjestääksesi palautuksen tarkastusta varten. Arviointimme perusteella me yleensä korjaamme, vaihdamme tai tarjoamme sopivan ratkaisun ilman lisäkustannuksia.
Huomaa, että asiakkaat vastaavat tuotteiden palautuksen toimituskuluista tarkastusta tai takuupalvelua varten.
Maasi tai alueesi on vastattava lähetysvarastoa
Globaali varasto
Globaalia varastoa (mukaan lukien Global-CN2) varten tilaukset lähetetään yleensä standardilähetyksellä 4–5 työpäivän kuluessa, ja toimitusaika on 20–25 päivää.
Yhdysvaltain (LA) varasto
Yhdysvaltain (LA) varastolle tilaukset lähetetään yleensä 2–3 työpäivän kuluessa. Tilaukset lähetetään Yhdysvaltoihin USPS:n tai FedExin palvelulla (ilmainen toimitus yli 79 dollarin tilauksissa), toimitusaika on 3–7 työpäivää. Lähetämme myös Kanadaan UPS:n kautta, toimitus kestää yleensä 10–12 työpäivää, toimituskulu on 169 dollaria.
Yhdysvaltain varasto
Yhdysvaltain varastolle tilaukset lähetetään yleensä 1–2 työpäivän kuluessa. Tilaukset lähetetään vain Yhdysvaltoihin USPS:n palvelulla (ilmainen toimitus yli 69 dollarin tilauksissa), toimitusaika on 3–7 työpäivää.
EU-varasto
EU-varastolle tilaukset lähetetään yleensä 1–2 työpäivän kuluessa, toimitusaika on 5–10 työpäivää.
UK-varasto
UK-varastolle tilaukset lähetetään yleensä 1–2 työpäivän kuluessa. Tilaukset lähetetään vain Yhdistyneeseen kuningaskuntaan Yodelin/Hermesin/DPD:n palvelulla (ilmainen toimitus yli 69 dollarin tilauksissa), toimitusaika on 3–7 työpäivää.
AU-varasto
AU-varastolle tilaukset lähetetään yleensä 1–2 työpäivän kuluessa. Tilaukset lähetetään vain Australiaan AU Postin palvelulla (ilmainen toimitus yli 79 dollarin tilauksissa). Toimitusaika on 3–7 työpäivää.
CA-varasto
CA-varastolle tilaukset lähetetään yleensä 1–2 työpäivän kuluessa. Tilaukset lähetetään vain Kanadaan Amazon UPS:n/FedExin/CA Postin palvelulla (ilmainen toimitus yli 99 dollarin tilauksissa). Toimitusaika on 3–7 työpäivää.
I have many rc planes, but this one is my favorite, it flys like… majestic, incredible scale flying.
CNHL AviNationRC Super Tucano V2 1600mm PNP RC Plane with All-Metal Retracts
Mike
I put this in my Arrma Mojave Grom
I put this in my Arrma Mojave Grom... probably not a great idea because these are soft case (oops I didn't know) They fit perfectly almost like they were made for the car even though they are soft. I'll be swapping to hard case whenever I see any wear on them though.