Siirry sisältöön
11.11 Tehomyynti
150 $ alennuspaketti vain 4,99 $ >
11.11 Tehomyynti
150 $ alennuspaketti vain 4,99 $ >

CNHL Super Tucano V2 1600mm Replacement Horizontal Stabilizer

Saatavuus:
10+ varastossa, valmiina lähetettäväksi
Saatavuus:
Vain 4 yksikköä jäljellä
Saatavuus:
Loppu varastosta
Saatavuus:
Loppu varastosta
Alkuperäinen hinta $14.99 - Alkuperäinen hinta $14.99
Alkuperäinen hinta $14.99
$14.99 USD
$14.99 - $14.99
Nykyinen hinta $14.99 USD
Ship_From: US (US2)

Yhdysvaltojen (LA) varastomaat:

Yhdysvallat ja Kanada (pois lukien Havaiji, Puerto Rico ja Yhdysvaltojen saari- tai sotilasalueet)

Yhdysvaltojen varastomaat:

Vain Yhdysvallat

EU:n varastomaat:

EU-maat (pois lukien Malta/Kypros)

Maailmanlaajuiset varastomaat: EU (pois lukien Malta/Kypros), Yhdysvallat, AU, CA, UK, CH, BR, CL, SA, JP, MY, SG, KR, PH, BY, MX, NZ, NO, PE.

Lisää toimitusmaita, tarkista ne täältä

The CNHL STUPV2017 is a replacement horizontal stabilizer for the Super Tucano V2 1600mm RC plane. It is designed to replace the original horizontal tail section after impact damage, transport damage or wear that makes repair of the existing part impractical.

The stabilizer comes factory finished in the matching V2 digital-camo scheme, helping restore the aircraft without repainting or trying to match the original color pattern. Two M3×14mm mounting screws are included as shown.

For pilots rebuilding a damaged airframe, using the correct V2 replacement part helps maintain the intended tail geometry, mounting position and overall scale appearance of the aircraft.

Quick Fit Check

Part Replacement Horizontal Stabilizer
Compatible Aircraft CNHL AviNationRC Super Tucano V2 1600mm PNP
Finish Factory-painted V2 digital camo
Mounting Hardware 2 × M3×14mm screws
Stock Number STUPV2017

CNHL Super Tucano V2 Replacement Horizontal Stabilizer

STUPV2017 replaces the horizontal stabilizer section of the Super Tucano V2 1600mm. It is useful when the original tail has been damaged during a hard landing, transport or storage and a clean replacement is preferable to repairing the existing foam structure.

The molded shape, mounting points and digital-camo finish are matched to the V2 airframe, helping the repaired aircraft retain its original appearance and tail alignment.

Compatibility

Designed for: CNHL AviNationRC Super Tucano V2 1600mm PNP RC Plane.

This replacement horizontal stabilizer is intended for the V2 airframe.

For fuselage sections, wings, landing gear, cockpit parts, propeller components and other replacement items, browse the Super Tucano V1 & V2 spare parts collection.

If you are preparing the aircraft for flight after repair, compare suitable packs in our 6S LiPo batteries for the Super Tucano 1600mm.

Installation Checks

After installing the replacement horizontal stabilizer, check the complete tail section carefully before reconnecting the flight battery or flying the aircraft.

  • Confirm the horizontal stabilizer is seated squarely and securely.
  • Install and tighten the supplied M3×14mm screws correctly.
  • Check that the tail surfaces move freely without binding.
  • Inspect control horns, ball links and linkage hardware.
  • Verify correct control direction and neutral position.
  • Check the aircraft CG after any major tail repair.
  • Perform a complete control and radio range check before the next flight.

Package Includes

  • 1 × CNHL Super Tucano V2 replacement horizontal stabilizer
  • 2 × M3×14mm mounting screws

Notice: This listing includes only the replacement horizontal stabilizer and mounting screws shown. Fuselage, vertical stabilizer, servos, landing gear, flight battery and other aircraft components are not included unless specifically shown.

CNHL-tuotteilla on 90 päivän takuu ostopäivästä lukien, ellei tuotteen ilmoituksessa toisin mainita.

Tämä takuu kattaa alkuperäiset materiaalien ja työn laadun viat. Se ei kata normaalia kulumista, pullistumista, turpoamista, ylilatausta, ylilatausta, virheellistä säilytystä, kolhuja tai vesivahinkoja, liittimien vaihtoja tai mitään vahinkoja, jotka johtuvat väärinkäytöstä tai käsittelyvirheestä.

Jos havaitset, että meiltä ostettu tuote on viallinen 90 päivän takuuajan kuluessa, ota meihin yhteyttä järjestääksesi palautuksen tarkastusta varten. Arviointimme perusteella me yleensä korjaamme, vaihdamme tai tarjoamme sopivan ratkaisun ilman lisäkustannuksia.

Huomaa, että asiakkaat vastaavat tuotteiden palautuksen toimituskuluista tarkastusta tai takuupalvelua varten.

Maasi tai alueesi on vastattava lähetysvarastoa

Globaali varasto

Globaalia varastoa (mukaan lukien Global-CN2) varten tilaukset lähetetään yleensä standardilähetyksellä 4–5 työpäivän kuluessa, ja toimitusaika on 20–25 päivää.

Yhdysvaltain (LA) varasto

Yhdysvaltain (LA) varastolle tilaukset lähetetään yleensä 2–3 työpäivän kuluessa. Tilaukset lähetetään Yhdysvaltoihin USPS:n tai FedExin palvelulla (ilmainen toimitus yli 79 dollarin tilauksissa), toimitusaika on 3–7 työpäivää. Lähetämme myös Kanadaan UPS:n kautta, toimitus kestää yleensä 10–12 työpäivää, toimituskulu on 169 dollaria.

Yhdysvaltain varasto

Yhdysvaltain varastolle tilaukset lähetetään yleensä 1–2 työpäivän kuluessa. Tilaukset lähetetään vain Yhdysvaltoihin USPS:n palvelulla (ilmainen toimitus yli 69 dollarin tilauksissa), toimitusaika on 3–7 työpäivää.

EU-varasto

EU-varastolle tilaukset lähetetään yleensä 1–2 työpäivän kuluessa, toimitusaika on 5–10 työpäivää.

UK-varasto

UK-varastolle tilaukset lähetetään yleensä 1–2 työpäivän kuluessa. Tilaukset lähetetään vain Yhdistyneeseen kuningaskuntaan Yodelin/Hermesin/DPD:n palvelulla (ilmainen toimitus yli 69 dollarin tilauksissa), toimitusaika on 3–7 työpäivää.

AU-varasto

AU-varastolle tilaukset lähetetään yleensä 1–2 työpäivän kuluessa. Tilaukset lähetetään vain Australiaan AU Postin palvelulla (ilmainen toimitus yli 79 dollarin tilauksissa). Toimitusaika on 3–7 työpäivää.

CA-varasto

CA-varastolle tilaukset lähetetään yleensä 1–2 työpäivän kuluessa. Tilaukset lähetetään vain Kanadaan Amazon UPS:n/FedExin/CA Postin palvelulla (ilmainen toimitus yli 99 dollarin tilauksissa). Toimitusaika on 3–7 työpäivää.

TOP