The CNHL STUPV2016 is a replacement vertical stabilizer for the AviNationRC Super Tucano V2 1600mm RC plane. It is designed to replace the original vertical tail section after impact damage, transport damage or wear that makes repair of the existing part impractical.
The stabilizer comes factory finished to match the Super Tucano V2 airframe, including the molded surface detail and scale markings shown in the product image. Two M3×14mm mounting screws are included for installation.
Using the correct V2 replacement part helps maintain the intended vertical-tail geometry, mounting position and overall scale appearance when rebuilding a damaged aircraft.
Quick Fit Check
Part
Replacement Vertical Stabilizer
Compatible Aircraft
CNHL AviNationRC Super Tucano V2 1600mm PNP
Finish
Factory-finished V2 color scheme with scale markings
Mounting Hardware
2 × M3×14mm screws
Stock Number
STUPV2016
CNHL Super Tucano V2 Replacement Vertical Stabilizer
STUPV2016 replaces the vertical tail section of the Super Tucano V2 1600mm. It is a practical solution when the original stabilizer has been damaged during a hard landing, ground incident, transport or storage.
The molded profile, surface detail and exterior finish are matched to the V2 airframe, helping the repaired aircraft retain the intended tail alignment and scale appearance.
This replacement vertical stabilizer is intended for the V2 airframe. Do not assume compatibility with the original V1 / Avios Super Tucano vertical tail unless V1 fitment has been specifically confirmed.
Confirm the vertical stabilizer is seated squarely and securely on the fuselage.
Install and tighten the supplied M3×14mm screws correctly.
Check the tail surfaces for free movement without binding.
Inspect the control horn, ball link and linkage hardware.
Verify correct rudder direction and neutral position after installation.
Check that the vertical tail remains aligned with the fuselage centerline.
Perform a full control check and radio range check before the next flight.
Package Includes
1 × CNHL Super Tucano V2 replacement vertical stabilizer
2 × M3×14mm mounting screws
Notice: This listing includes only the replacement vertical stabilizer and mounting screws shown. Fuselage, horizontal stabilizer, servos, control linkages, flight battery and other aircraft components are not included unless specifically shown.
CNHL-tuotteilla on 90 päivän takuu ostopäivästä lukien, ellei tuotteen ilmoituksessa toisin mainita.
Tämä takuu kattaa alkuperäiset materiaalien ja työn laadun viat. Se ei kata normaalia kulumista, pullistumista, turpoamista, ylilatausta, ylilatausta, virheellistä säilytystä, kolhuja tai vesivahinkoja, liittimien vaihtoja tai mitään vahinkoja, jotka johtuvat väärinkäytöstä tai käsittelyvirheestä.
Jos havaitset, että meiltä ostettu tuote on viallinen 90 päivän takuuajan kuluessa, ota meihin yhteyttä järjestääksesi palautuksen tarkastusta varten. Arviointimme perusteella me yleensä korjaamme, vaihdamme tai tarjoamme sopivan ratkaisun ilman lisäkustannuksia.
Huomaa, että asiakkaat vastaavat tuotteiden palautuksen toimituskuluista tarkastusta tai takuupalvelua varten.
Maasi tai alueesi on vastattava lähetysvarastoa
Globaali varasto
Globaalia varastoa (mukaan lukien Global-CN2) varten tilaukset lähetetään yleensä standardilähetyksellä 4–5 työpäivän kuluessa, ja toimitusaika on 20–25 päivää.
Yhdysvaltain (LA) varasto
Yhdysvaltain (LA) varastolle tilaukset lähetetään yleensä 2–3 työpäivän kuluessa. Tilaukset lähetetään Yhdysvaltoihin USPS:n tai FedExin palvelulla (ilmainen toimitus yli 79 dollarin tilauksissa), toimitusaika on 3–7 työpäivää. Lähetämme myös Kanadaan UPS:n kautta, toimitus kestää yleensä 10–12 työpäivää, toimituskulu on 169 dollaria.
Yhdysvaltain varasto
Yhdysvaltain varastolle tilaukset lähetetään yleensä 1–2 työpäivän kuluessa. Tilaukset lähetetään vain Yhdysvaltoihin USPS:n palvelulla (ilmainen toimitus yli 69 dollarin tilauksissa), toimitusaika on 3–7 työpäivää.
EU-varasto
EU-varastolle tilaukset lähetetään yleensä 1–2 työpäivän kuluessa, toimitusaika on 5–10 työpäivää.
UK-varasto
UK-varastolle tilaukset lähetetään yleensä 1–2 työpäivän kuluessa. Tilaukset lähetetään vain Yhdistyneeseen kuningaskuntaan Yodelin/Hermesin/DPD:n palvelulla (ilmainen toimitus yli 69 dollarin tilauksissa), toimitusaika on 3–7 työpäivää.
AU-varasto
AU-varastolle tilaukset lähetetään yleensä 1–2 työpäivän kuluessa. Tilaukset lähetetään vain Australiaan AU Postin palvelulla (ilmainen toimitus yli 79 dollarin tilauksissa). Toimitusaika on 3–7 työpäivää.
CA-varasto
CA-varastolle tilaukset lähetetään yleensä 1–2 työpäivän kuluessa. Tilaukset lähetetään vain Kanadaan Amazon UPS:n/FedExin/CA Postin palvelulla (ilmainen toimitus yli 99 dollarin tilauksissa). Toimitusaika on 3–7 työpäivää.
CNHL 4500mAh 18.5V 5S 30C Lipo Battery with XT90 Plug
Nigelnix
Top RC Corsair running 4 x 7200 li-hv packs
Just Finishing off my Top RC Corsair running 4 off 7200 Li-Hv packs
2 in series 2 in parallel giving a total capacity of 14,400 Mah for a 8000 DualSky Motor swinging a Beila 24" x 12" 3 blade prop, with loads of power.
Awesome battery for the Traxxas Mini Maxx! It fits perfectly, gives enough power for the BL-2S, and is good to charge! The only issue CNHL should do is make all different connecters to these batteries. This battery came with XT60. My Mini Maxx is TRA connector. The connector on the battery should be TRA. Keep that in mind CNHL!
Good work!