CNHL AviNationRC Horten Ho 229 Replacement EDF Motor (1311 5600KV)

The CNHL AviNationRC Horten Ho 229 EDF Motor Replacement is designed to restore the power system of the 813mm twin 35mm EDF Ho 229 RC plane.

This replacement motor is made for the CNHL AviNationRC Horten Ho 229 RC Plane 813mm Twin 35mm EDF PNP. It is intended for pilots who need to replace a damaged, worn, or faulty EDF motor and restore the aircraft’s compact twin-EDF flying character.

Product Specifications

Replacement motor for the twin EDF power system

The CNHL AviNationRC Horten Ho 229 uses a compact twin 35mm EDF layout, and the motors are central to the way this small flying wing feels in the air. When one motor is damaged, worn, or no longer running smoothly, replacing it with the correct motor helps restore balanced thrust and the intended power response of the aircraft.

This EDF motor replacement is not a general-purpose upgrade part. It is made for the Ho 229’s original power system layout, so it is the right choice when you want to bring the aircraft back to its correct twin-EDF setup without changing the basic configuration of the model.

When this EDF motor replacement makes sense

This part is most useful when the original motor has been damaged after a crash, has developed rough running, shows reduced performance, or no longer matches the response of the opposite EDF unit. On a twin-EDF aircraft like the Ho 229, matched motor behavior matters because uneven thrust can affect the aircraft’s feel in flight.

It is also a practical spare for pilots who fly the Ho 229 often. The airplane’s compact twin-EDF setup is a major part of its appeal, and keeping the power system healthy helps preserve the faster, sharper flying character that makes the model stand apart from ordinary small foam aircraft.

Installation note

Before replacing the EDF motor, review the official CNHL AviNationRC Horten Ho 229 assembly manual. Make sure the motor is mounted securely, the wiring is routed cleanly, and the EDF fan rotates freely without rubbing before powering the model.

After installation, check motor direction, throttle response, vibration, and EDF balance before flight. Since the Ho 229 uses a twin EDF setup, both sides should run smoothly and respond consistently. If one side sounds different or produces unusual vibration, inspect the EDF unit again before flying.

Related Ho 229 support pages

This replacement EDF motor is made for the CNHL AviNationRC Horten Ho 229 RC Plane 813mm Twin 35mm EDF PNP. For more replacement items, visit the Horten Ho 229 spare parts collection.

If you are restoring the aircraft’s power system, you may also want to check the Horten Ho 229 battery collection and read the CNHL AviNationRC Horten Ho 229 review for more context on the aircraft’s flying character.

FAQ

What is this EDF motor used for?
This EDF motor is used to replace a motor in the twin 35mm EDF power system of the CNHL AviNationRC Horten Ho 229 RC plane.

What motor specification is this part based on?
This replacement motor is a 1311 5600KV brushless outrunner for the Ho 229’s compact EDF setup.

Do I need to check motor direction after installation?
Yes. Motor direction, throttle response, vibration, and EDF rotation should all be checked before flight.

Should both EDF motors run consistently?
Yes. Since the Ho 229 uses a twin EDF layout, both sides should run smoothly and respond consistently for the best flight behavior.

Is this motor compatible with other RC planes?
It is designed for the CNHL AviNationRC Horten Ho 229 RC Plane 813mm Twin 35mm EDF PNP.

CNHL products come with a 90-day warranty from the date of purchase, unless otherwise stated in the product listing.

This warranty covers original defects in materials and workmanship. It does not cover normal wear and tear, puffing, swelling, over-discharge, over-charge, improper storage, crash or water damage, connector changes, or any damage resulting from misuse or mishandling.

If you find that a product purchased from us is defective within the 90-day warranty period, please contact us to arrange a return for inspection. Based on our evaluation, we will usually repair, replace, or offer an appropriate solution at no additional charge.

Please note that customers are responsible for the shipping costs when returning products for inspection or warranty service.

Your country or region needs to correspond to the shipping warehouse

Global Warehouse

Global Warehouse (including Global-CN2) orders are usually dispatched via standard shipping within 4–5 working days. The shipping time is typically 20–25 days, or 10–15 days if the order is shipped from Global-CN2.

US (LA) Warehouse

For the US (LA) Warehouse, orders usually are sent out in 2 to 3 working days. Orders are shipped to the United States via USPS or FedEx service (Free Shipping on orders over $79), the shipping time need 3-7 working days. We also ship to Canada via UPS, the shipping usually takes 10-12 working days, the shipping cost is $169.

US Warehouse

For the US Warehouse, orders usually are sent out in 1 to 2 working days. Orders are only shipped to United Status via USPS service (Free Shipping on order over $69), the shipping time need 3-7 working days.

EU Warehouse

For the EU Warehouse, orders are usually sent out in 1 to 2 working days, and shipping time takes 5-10 working days.

UK Warehouse

For the UK Warehouse, orders are usually sent out in 1 to 2 working days. Orders are only shipped to the United Kingdom via Yodel/Hermes/DPD service (Free Shipping on orders over $69), the shipping time takes 3-7 working days.

AU Warehouse

For the AU Warehouse, orders are usually sent out in 1 to 2 working days. Orders are only shipped to Australia via AU Post service (Free Shipping on orders over $79). The shipping time is 3-7 working days.

CA Warehouse

For the CA Warehouse, orders are usually sent out in 1 to 2 working days. Orders are only shipped to Canada via Amazon UPS/FedEx/CA Post service (Free Shipping on orders over $99). The shipping time needs 3-7 working days.