Skip to content
The Black Friday Rush Starts Early!
Now Save Up to 70% OFF! >
The Black Friday Rush Starts Early!
Now Save Up to 70% OFF! >

CNHL Super Tucano V2 1600mm Review: What Changed from V1?

The CNHL AviNationRC Super Tucano V2 1600mm is not simply the original aircraft wearing a different camouflage scheme. The V2 keeps the large 1600mm format, 6S power system and distinctive five-blade propeller that define the platform, but changes several of the areas that matter most in everyday ownership: landing gear, control linkages, battery access, airframe durability, assembly and transport.

CNHL AviNationRC Super Tucano V2 1600mm RC plane in Ecuadorian Air Force digital camo

Inspired by the full-scale A-29 Super Tucano / EMB-314 Super Tucano, this new version combines scale presence with a number of practical revisions developed around the way a large RC aircraft is actually assembled, transported, adjusted and flown.

Answer first: the Super Tucano V2 is a genuine mechanical and structural update, not a cosmetic V1 refresh. The biggest changes include a new silver all-metal retract system, a servo-operated nose gear door, reinforced elevator surfaces, ball-link controls, a more open battery compartment, reinforced five-blade propeller system and a more transport-friendly screw-assisted airframe assembly.

Super Tucano V2 Is More Than a New Livery

The most obvious visual change is the new Ecuadorian Air Force digital camouflage. It gives the V2 a completely different identity from the earlier Super Tucano and moves away from the aggressive shark-mouth appearance associated with some previous aircraft.

The camouflage will naturally come down to personal taste, but the important point is that the changes go much deeper than paint. Underneath the new scheme, the V2 includes revised landing gear, new control-link hardware, structural reinforcement, a redesigned battery compartment and a revised assembly system.

Super Tucano V1 vs V2: The Main Differences

Area V1 V2
Livery Earlier paint schemes High-contrast Ecuadorian Air Force digital camo
Retracts Earlier retract system New silver all-metal electronic retract system
Nose Gear Door Earlier arrangement Dedicated servo-operated door
Elevator Earlier foam structure Reinforced control surface structure
Control Links Traditional clevis-style linkage Ball-link control system
Battery Bay More restricted rearward battery movement Longer, more open layout for easier CG adjustment
Airframe Assembly More permanent assembly approach Revised screw-assisted wing and fuselage joining
Propeller 13×8 five-blade 13×8 five-blade with strengthened design

CNHL Super Tucano V1 vs V2

New All-Metal Retracts Are One of the Biggest V2 Upgrades

A large 1600mm scale aircraft places significant demands on its landing gear. The V2 therefore receives one of its most important mechanical changes in the form of a new silver all-metal electronic retract system.

The tricycle landing-gear arrangement consists of a steerable nose gear and two main landing-gear units. Large wheels and aluminum suspension components continue to make the aircraft practical for grass operations, while the revised retract hardware gives the V2 a more substantial undercarriage system.

Super Tucano V2 landing gear door and retract linkage detail

This is the kind of upgrade that matters far more than a cosmetic revision. Takeoffs, landings, taxiing and everyday transport all put stress into the gear, especially on a model with a flying weight of roughly 4.1kg.

A Servo-Operated Nose Gear Door Adds More Scale Detail

The V2 also introduces a servo-operated nose landing gear door. Rather than treating the nose door as a simple fixed cosmetic panel, the mechanism can be sequenced with the retract system for a more scale-like gear cycle.

The door servo can be assigned and mixed through the radio system, giving the pilot control over the timing. A slower closing movement is particularly useful because it allows the nose gear to clear the door before the panel finishes closing.

CNHL Super Tucano V2 approaching the runway with landing gear extended

This is also an important setup point: the nose gear door is not just a decorative extra. Correct servo travel, linkage geometry and sequencing should be checked carefully before flight so the door and retract do not interfere with one another.

Reinforced Elevator Surfaces Improve Durability

The elevator area receives structural reinforcement on the V2. The earlier aircraft could be more vulnerable to damage in the thinner foam sections of the elevator, particularly during handling and transport.

The revised V2 structure adds reinforcement through the more vulnerable section of the control surface. It is a relatively small visual change, but it directly addresses the durability of a component that is frequently exposed during storage, assembly and transportation.

Ball-Link Controls Replace the Older Clevis-Style Setup

Another important mechanical change is the move to a ball-link control system across the flight-control surfaces.

Ball-link connections create a secure articulated joint between the servo linkage and the control horn. Compared with a looser linkage arrangement, they can reduce unwanted play while allowing the rod to move freely through the changing angle of the control surface.

CNHL Super Tucano V2 ball-link control linkage for precise flight-surface movement

For a large sport-scale aircraft, that makes the linkage system feel more deliberate and better suited to precise setup. It is especially useful on a model that combines ailerons, elevator, rudder and flaps across six primary flight-control servos.

The Redesigned Battery Bay Makes CG Setup Much Easier

The battery compartment is one of the most practical V2 improvements. The earlier layout could restrict how far rearward the battery could be moved, and some V1 setups required more compromise when balancing different battery sizes and weights.

The V2 uses a longer and more open battery bay, with less foam blocking the rear section. This allows the pack to move farther fore and aft, making it much easier to tune the center of gravity without modifying the surrounding foam structure.

CNHL Super Tucano V2 and V1 battery bay comparison showing longer V2 battery space for easier CG adjustment

That extra adjustment range matters because the Super Tucano V2 supports a broad 6S 4000–6700mAh battery range, with recommended pack weight around 600–900g. Different battery capacities and constructions can shift the balance point significantly even when they are all electrically suitable.

The initial CG reference is 80mm behind the wing leading edge, measured with the aircraft inverted and the landing gear retracted. Final battery placement should always be adjusted around the actual pack being used rather than copied from another setup.

Screw-Assisted Assembly Makes a 1600mm Aircraft Easier to Transport

A 1600mm wingspan aircraft with a fuselage length of 1617mm is not difficult to appreciate at the field, but it can be much harder to fit into a vehicle, workshop or storage area.

The V2 introduces a revised screw-assisted joining system for major airframe sections. The included screw and plywood-plate hardware offers an additional assembly option, although properly glued joints remain the preferred choice for maximum structural security.

That does not mean the aircraft becomes a completely tool-free field model. Electrical connections still need to be managed during assembly, and pilots who frequently remove the wings may still wish for an even more integrated quick-connect solution.

The optional hardware adds flexibility during the build, but any removable joint must be assembled and inspected carefully before flight.

The Familiar 6S Power System Remains

The V2 keeps the established 6S formula rather than changing the aircraft into a completely different power platform.

IMPORTANT SAFETY NOTICE – MOTOR REPLACEMENT REQUIRED

DO NOT FLY WITH THE FACTORY-INSTALLED MOTOR. Every Super Tucano V2 includes a replacement motor free of charge. Install the supplied replacement motor before the first flight. Do not fly until the replacement is correctly installed.

Read the motor replacement instructions (PDF) or watch the motor replacement video tutorial before operating the aircraft.

Wingspan 1600mm
Length 1617mm
Flying Weight Approx. 4100g
Motor 5052-525KV
ESC 100A RVS
Propeller 13×8 5-Blade
Battery 6S 22.2V, 4000–6700mAh, 40–120C
Typical Flight Time Around 7 minutes with mixed throttle
Initial CG 80mm behind wing leading edge, inverted with gear retracted

The 13×8 five-blade propeller remains central to the aircraft's appearance and sound, but the V2 propeller system has been strengthened to improve durability.

The 100A RVS ESC also retains reverse thrust. With an appropriate transmitter setup, reverse thrust can be assigned to a switch and used after touchdown to help slow the aircraft during the landing rollout.

Flight-Control Servos, Flaps and Radio Requirements

The V2 uses six 13g metal-gear flight-control servos for the ailerons, elevator, rudder and flaps, together with a dedicated nose-steering servo and a separate nose-door servo.

For pilots who want access to the full feature set, a radio system with seven or more channels provides the most useful flexibility. Additional channel capacity makes it easier to manage retracts, flap positions, reverse thrust and the independent nose-door sequence without forcing too many functions into shared channels.

Programmable flap speed is also useful on a large scale aircraft like this. Slowing the flap deployment and retraction creates a smoother appearance and avoids abrupt configuration changes during approach.

How to Set Up the Super Tucano V2 Nose Gear Door: FrSky ETHOS & Spektrum

One of the most distinctive upgrades on the CNHL AviNationRC Super Tucano V2 1600mm is its independently servo-operated nose landing gear door. Together with the upgraded all-metal retracts, it gives the aircraft a more realistic landing gear operation. However, unlike a simple retract installation, the door and landing gear must be properly coordinated through the radio system.

The goal is straightforward: the nose gear door must provide sufficient clearance before the landing gear moves. During retraction, the door must remain clear of the moving wheel and close only after the nose gear is fully stowed. During extension, the door must open before the wheel moves down. Incorrect timing or servo endpoints can cause interference, excessive servo load or damage to the door mechanism.

1. FrSky ETHOS: Download the Preconfigured Radio Model Files

For pilots using FrSky transmitters with ETHOS, CNHL offers a convenient starting point. The Super Tucano V2 ETHOS model memory files already include the nose gear door and landing gear sequencing configuration, reducing the need to create the sequencing logic manually.

To get started:

  1. Download the configuration package. Save the Super Tucano V2 ETHOS model files to your computer and extract the ZIP archive.
  2. Back up your existing radio settings. Before importing a model configuration, preserve any transmitter settings and model memories you want to keep.
  3. Import the model configuration. Follow the supported model import procedure for your ETHOS transmitter and firmware version.
  4. Verify receiver assignments. Check that the imported outputs correspond to the actual connections for the landing gear, nose door servo, flight controls and other functions on your aircraft.
  5. Test the complete gear sequence. Confirm that the door opens before the nose wheel moves and that the programmed servo travel does not force the door beyond its mechanical limits.

Download CNHL Super Tucano V2 FrSky ETHOS Model Memory Files (ZIP)

The included sequencing setup can save considerable programming time, but an imported model file does not automatically guarantee compatibility with every transmitter, receiver or servo installation. Confirm the settings on your own aircraft before powering the retract system for regular use.

2. Spektrum: Program the Nose Gear Door Sequencer

Spektrum radio users can achieve coordinated nose gear door operation using the built-in Sequencer function available on compatible programmable transmitters. Rather than operating the nose door and retracts independently with separate switches, both functions can be assigned to the same gear switch while following different movement schedules.

The general setup process is:

  1. Access the Sequencer menu. On compatible Spektrum transmitters, navigate to Model Adjust > Sequencer and choose the Door Cycle and Wheels sequence.
  2. Assign the gear switch. Select the switch you want to use for retract operation. The same switch will trigger the coordinated door and landing gear sequence.
  3. Select the output channels. Assign the Wheels output to the retract channel and the Door output to the channel connected to the nose gear door servo. The correct channel numbers depend on your receiver setup.
  4. Configure the movement modes. Use Step for the retract output and Proportional for the nose door servo when using the corresponding Spektrum sequencing arrangement. This allows the gear command to change at a defined point while the door servo follows a controlled movement profile.
  5. Adjust the timing windows. Set the Forward and Reverse timing so the door opens before the landing gear moves. Ensure that the wheel has sufficient clearance before the door begins closing during retraction.
  6. Verify both directions. Test gear extension and retraction repeatedly, checking the door opening, wheel clearance, servo endpoints and any unwanted binding.

Timing values should be treated as aircraft-specific adjustments rather than universal presets. Servo travel, receiver channel mapping, transmitter firmware and the physical linkage position can all affect the final sequence. A simple Y-harness is not a substitute for proper sequencing because the door and landing gear must not move into each other's path.

For a practical walkthrough of the Spektrum menus, channel assignments and timing adjustments, follow this step-by-step Spektrum landing gear door sequencing video tutorial .

3. Pre-Flight Nose Gear Door Testing and Troubleshooting

Whether you use a preconfigured FrSky ETHOS model or program the sequence manually on a Spektrum transmitter, a full ground test is essential. Perform setup checks with the propeller removed and the aircraft securely supported so the landing gear can operate freely.

  • Door moves too early: Adjust the sequence timing to provide additional clearance before the retract mechanism begins moving.
  • Door servo buzzes or stalls: Check the servo endpoints, mechanical linkage and potential contact with the wheel or surrounding structure.
  • Door moves in the wrong direction: Verify the assigned channel, servo direction and programmed travel limits.
  • Gear and door move together: Check that the sequence includes the required delay rather than applying simultaneous movement commands.
  • Unexpected operation after restart: Repeat the full extension and retraction checks after powering the radio and aircraft off and back on.

How Does the Super Tucano V2 Fly?

The Super Tucano platform is not limited to one style of flying. The V2 is comfortable being presented as a large scale aircraft, but it still has enough power and control authority for more energetic passes.

Slow passes, low-level fly-bys, banking turns, knife-edge passes and gear-down scale passes all suit the aircraft's character. The retract sequence is visually quick and clean, while the large airframe gives the model strong presence even when it is not being flown aggressively.

CNHL Super Tucano V2 1600mm RC plane performing an aerobatic banking pass

That balance between scale appearance and sport flying is one of the reasons the 1600mm Super Tucano format remains attractive. The V2 does not try to turn the aircraft into something completely different; it focuses on improving the parts of the platform that owners interact with most often.

What Has Not Changed?

A good V2 does not need to replace everything that already worked. Several of the core Super Tucano characteristics remain familiar:

  • 1600mm wingspan
  • Large 6S sport-scale power system
  • 13×8 five-blade propeller format
  • Reverse-thrust-capable 100A ESC
  • Flaps for approach and landing
  • Scale navigation and position lighting
  • Large wheels suitable for grass-field operation

The V2 therefore feels like an evolution of the existing Super Tucano concept rather than a completely unrelated aircraft carrying the same name.

Super Tucano V2 Availability, Price & How to Order

The CNHL AviNationRC Super Tucano V2 1600mm officially launched on October 8, 2026. The aircraft is now stocked in both the US and EU warehouses, making it possible for customers in those markets to check local ordering options rather than waiting for a future release.

Warehouse inventory, regional shipping options, current price and any active promotions can change. Check the live product listing for the most accurate information before ordering. For destinations outside the regular warehouse coverage, contact CNHL Support to ask about possible shipping arrangements.

Ready to explore the V2? Compare current regional stock, pricing and available purchase options on the official product page.

View the CNHL Super Tucano V2 1600mm PNP RC Plane

Is the Super Tucano V2 Worth Paying Attention To?

The most important thing about the V2 is that its changes are concentrated in practical areas rather than simply adding more decoration.

The new retract system addresses one of the most stressed parts of a large RC aircraft. The reinforced elevator improves durability. Ball links improve the control linkage arrangement. The redesigned battery bay makes CG adjustment easier. The screw-assisted joining system makes the airframe more manageable away from the flying field. The servo-operated nose gear door adds another layer of scale detail.

That combination makes the CNHL Super Tucano V2 1600mm a much more substantial update than the new camouflage alone suggests. Pilots who already know the original aircraft should recognize the underlying character immediately, but the areas surrounding that familiar platform have been revised in ways that should make the V2 easier to own, set up and maintain.

Frequently Asked Questions

What is new on the CNHL Super Tucano V2?

Major V2 changes include the silver all-metal retract system, servo-operated nose gear door, reinforced elevator surfaces, ball-link control system, redesigned battery bay, strengthened five-blade propeller system, revised airframe assembly and new Ecuadorian Air Force digital camouflage.

Is the Super Tucano V2 just a new livery?

No. The digital camouflage is the most visible change, but the V2 also includes significant mechanical, structural and usability revisions throughout the aircraft.

When was the CNHL Super Tucano V2 released?

The Super Tucano V2 officially launched on October 8, 2026 and is now available through CNHL, with current inventory in the US and EU warehouses.

Which warehouses currently stock the Super Tucano V2?

The US and EU warehouses currently have stock. Check the selected warehouse and shipping availability at checkout, as inventory can change.

Is the original free-battery launch promotion still available?

A limited free-battery promotion was announced for eligible launch-period orders. Please check the current product listing for any active offers; previous launch incentives are not guaranteed to remain available.

What battery does the Super Tucano V2 use?

The aircraft is designed around a 6S 22.2V battery system and supports approximately 4000–6700mAh packs with a recommended battery weight of roughly 600–900g.

Does the Super Tucano V2 have metal retracts?

Yes. The V2 introduces a new silver all-metal electronic retract landing-gear system together with a dedicated servo-operated nose gear door.

Does the Super Tucano V2 have reverse thrust?

Yes. The 100A RVS ESC supports reverse thrust, which can be assigned through a suitable transmitter setup and used to help reduce rollout distance after landing.

Do I need to replace the Super Tucano V2 motor before the first flight?

Yes. Do not fly with the factory-installed motor. A replacement motor is supplied free with every aircraft and must be correctly installed before the first flight. Use CNHL's motor replacement instructions or video tutorial for guidance.

How many receiver channels does the Super Tucano V2 need?

A seven-channel-or-higher radio system is the preferred direction for pilots who want flexibility with flaps, retracts, the independent nose gear door and reverse thrust. Additional channels make the full feature set easier to configure.

Is the CNHL Super Tucano V2 the same as the Avios Super Tucano?

No. The Super Tucano V2 discussed here is a CNHL / AviNationRC product. Avios and HobbyKing names may appear in Super Tucano RC searches because of earlier products in the market, but they should not be treated as the brand or manufacturer of this V2 aircraft.

What full-scale aircraft is this RC Super Tucano based on?

The aircraft is inspired by the Embraer EMB-314 / A-29 Super Tucano, the turboprop light-attack and advanced-training aircraft that gives the RC model its distinctive proportions and scale identity.

Can I order the Super Tucano V2 from the US or EU warehouse?

Yes. Both the US and EU warehouses now have inventory. Stock and shipping eligibility can vary, so check the selected warehouse on the product page before ordering.

Previous article How to Calculate LiPo Battery Flight time
Next article GEPRC TriPro6 O4 Pro Review: Is This 6-Inch Long-Range FPV Drone the Sweet Spot?

Comments

CNHL Team - November 9, 2026

@Wynn, thanks for your interest in the Super Tucano V2!

Due to the aircraft’s large size and high international shipping costs, we don’t currently plan to stock it in our Global warehouse.

However, we do have stock available at our factory! If you’re interested in ordering, please contact our online customer service team:
https://chinahobbyline.com/pages/contact

They can help check the shipping options and estimated costs for your country.

We appreciate your understanding and support!

— CNHL Team

CNHL Team - November 9, 2026

@Paul, the Super Tucano V2 package includes the 1600mm airframe, 5052-525KV motor, 100A ESC, strengthened 5-blade propeller, all-metal retractable landing gear, servos, LED lighting, cockpit with pilot figures, and assembly hardware.

You’ll need to provide your own transmitter and receiver, 6S LiPo battery, compatible charger, and assembly adhesive.

Important: We’re also providing a brand-new replacement motor and battery free of charge for first-batch orders, this motor may arrive in a separate shipment. Please install the replacement motor before the first flight.

You can find the full specifications and package in PDP details.

— CNHL Team

Wynn - November 9, 2026

when will the V2 be available in the global warehouse?

Paul Antonsen - November 9, 2026

what comes in the box for the super tocano v2

CNHL Team - November 3, 2026

@Gia, yes, the Super Tucano V2 has already sold out in our EU warehouse. We’re working hard to produce the next batch, but due to production lead times and international shipping, it’s unlikely that we’ll be able to restock our EU warehouse before the end of this year.

We know this is disappointing, and we really appreciate your interest and patience!

We recommend subscribing to our email newsletter on the CNHL website to stay updated on the latest restock news and availability.

— CNHL Team

Gary Webb - November 3, 2026

Thank you for the update and availability of this model in the U.S. I just ordered mine yesterday. I look forward to receiving it and flying it soon. I am flying the version 1 and want the version 2 as well.

Gia - November 3, 2026

Is the v2 already sold out in Europe stock? When will it be available again? Any chance to get this plane still this year?

CNHL Team - November 2, 2026

@Simon, we completely understand your frustration, especially after waiting two years. We really appreciate your patience and interest in the Super Tucano!

The main challenge with Australia is shipping. Because the Super Tucano is such a large aircraft, shipping small quantities individually is extremely expensive, and we currently don’t have enough volume to fill a container for Australia. We also don’t have a local Australian distributor yet, which makes regular stocking difficult.

We’re hoping to find an Australian RC retailer or distributor to help make these aircraft more accessible locally.

The good news is that we do have less stock available at our factory! Please feel free to contact our online customer service. They can check whether individual shipping to Australia is possible and provide an estimated cost.

We really hope we can find a better long-term solution for our Australian customers!

— CNHL Team

Simon lovelock - November 2, 2026

Will the Super Tucano be available for sale in Australia at any stage.
I have been waiting two years to purchase one from your Global Warehouse, never in stock, frustrating.

CNHL Team - October 26, 2026

@Steve, as we mentioned in an earlier comment, for US customers, including Washington, we expect the pre-order/product page to go live around late October to early November, once the first US allocation is ready.

You haven’t missed the US pre-order! Please keep an eye on our website, or feel free to contact our [online customer service team] for the latest availability updates.

— CNHL Team

Leave a comment

Comments must be approved before appearing

* Required fields

CNHL Lipo Batteries

CNHL aim at providing high-quality Li-Po batteries and RC products to all hobby enthusiasts with excellent customer services and competitive prices

VIEW ALL
TOP