Do you know what is a soft pack 2s lipo battery 100c tab?

Today's article 2s lipo battery 100c manufacturing mulberry CNHL will introduce the 2s lipo battery 100c tabs, the article will introduce the basic information, classification and metal band material of the 2s lipo battery 100c tabs.

1. What is the 2s lipo battery 100c tab?

The pole ear is a component of the soft pack 2s lipo battery 100c product. The 2s lipo battery 100c is divided into positive and negative poles. The tabs are the metal conductors that lead out the positive and negative poles from the 2s lipo battery 100c cell. Generally speaking, the ears of the positive and negative poles of the 2s lipo battery 100c are used for charging and discharging. point of contact. The positive electrode of 2s lipo battery 100c is made of aluminum (Al) material, the negative electrode is made of nickel (Ni) material, and the negative electrode is also made of copper nickel-plated (Ni—Cu) material.

2. 2s lipo battery 100c tab classification

2.1 According to the material of 2s lipo battery 100c tab metal strap:

⑴Aluminum (Al) tab: generally used as a positive tab, if the 2s lipo battery 100c is a titanate negative electrode, it is also used as a negative tab.
(2) Nickel (Ni) tab: used as a negative tab, mainly used in digital small 2s lipo battery 100c, such as: mobile phone 2s lipo battery 100c, mobile power 2s lipo battery 100c, tablet 2s lipo battery 100c, smart transfer Equipment 2s lipo battery 100c etc.
(3) Nickel-plated copper (Ni—Cu) tabs: used as negative tabs, mainly used in power 2s lipo battery 100c and high-rate 2s lipo battery 100c.

2.2 According to the polar ear glue (domestic market):

⑴ Vinyl tabs: generally used in low-end digital small 2s lipo battery 100c.
(2) Yellow rubber tabs: generally used in low-end power 2s lipo battery 100c and high-rate 2s lipo battery 100c.
(3) White plastic tabs: generally used in high-end digital 2s lipo battery 100c, power 2s lipo battery 100c and high-rate 2s lipo battery 100c.

2.3 The finished product packaging of the pole ear is divided into:

(1) Disc-type tabs (the whole metal strip is wound into a disc after passing through the equipment and adding the film), which is used in the automatic production line
(2) Plate type tabs (metal strips are added with film and then cut into individual pieces, and then placed in rows with two thin transparent plastic sheets sandwiched in the middle), which are used in ordinary production lines.

3. 2s lipo battery 100c tab metal strap material

AL1050 aluminum alloy is formed by adding a small amount of copper element to pure aluminum, which has excellent forming processing characteristics, high corrosion resistance, good weldability and electrical conductivity.
TU1 is oxygen-free copper, with very low oxygen and impurity content, high purity, excellent electrical and thermal conductivity, excellent ductility, low air permeability, no "hydrogen disease" or very little "hydrogen disease"; processing performance, welding, resistance Corrosion and cold resistance are good.
Well, the above is all the information about the 2s lipo battery 100c pole ear that CNHL brought to you today. I hope that through the introduction of the above content, you can have a better understanding of the 2s lipo battery 100c pole ear. For more information about lipo battery, please visit Read below:
Poor peeling of Lipo battery negative electrode: improved by double coating
Detailed knowledge of RC lipo battery diaphragm