Siirry sisältöön
11.11 Tehomyynti
150 $ alennuspaketti vain 4,99 $ >
11.11 Tehomyynti
150 $ alennuspaketti vain 4,99 $ >

RC-harrastusblogit

RSS
  • Durafly EFXtra vs Eflite V900 RC plane comparison setup with both aircraft on a table before flight
    elokuu 28, 2026

    Durafly EFXtra vs Eflite V900: Which High-Speed RC Racer Is Better?

    The Durafly EFXtra and Eflite V900 proved that a compact foam RC plane could deliver serious 100+ MPH performance without becoming large or complicated. This comparison looks at their speed, battery systems, handling and design priorities, then asks a bigger question: what if the same lightweight 975mm-class formula were developed around 6S power from the beginning?

    Lue nyt
  • ToolkitRC M6D dual smart LiPo charger in‑use screenshot, display showing 180.1‑watt charging power for lithium‑polymer battery, XT60 connector
    elokuu 27, 2026

    How Many Watts Does My LiPo Charger Need?

    LiPo charger wattage is determined by battery voltage and charging current. Multiply the battery’s full-charge voltage by the intended charge current, then add practical headroom for charger losses, input limitations and other active channels. A 4S 5000mAh battery at 1C needs about 84W at the battery, while a 6S 5000mAh pack needs about 126W. Charging two identical batteries independently roughly doubles the required output.

    Lue nyt
  • HPI Stage D10 Ford Mustang RTR Spec-5 FD drift cars on an indoor RC drift track
    elokuu 26, 2026

    HPI Stage D10 Review: A New 1/10 RWD Drift Car Built to Grow With You

    The HPI Stage D10 combines an officially licensed Ford Mustang RTR Spec-5 FD body with a genuinely adjustable rear-wheel-drive drift chassis. From the entry-level Brushed RTR to the sensored FLUX version, this is a platform designed to make RWD drifting approachable without leaving experienced tuners with nowhere to go.

    Lue nyt
  • How to Balance Charge a LiPo Battery
    elokuu 19, 2026

    How to Balance Charge a LiPo Battery

    Balance charging uses both the battery’s main power lead and balance connector so the charger can monitor individual cells while charging the complete pack. To balance charge correctly, inspect the battery, identify its chemistry and cell count, calculate an appropriate current, connect both leads, select LiPo Balance Charge, and confirm that the manually selected and detected S counts agree before starting.

    Lue nyt
TOP